Hitachi C52-WD9000 Owners Guide

Hitachi C52-WD9000 Manual

Get Hitachi C52-WD9000 PDF manuals and user guides View all Hitachi C52-WD9000 manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi C52-WD9000 manual content summary:

  • Hitachi C52-WD9000 | Owners Guide - Page 1
    INSTRUCTION MANUAL Projection Color Television z Thank you for your purchasing HITACHI projection TV products. z In order to use the Projection color TV properly, please read this instruction manual carefully before using it.
  • Hitachi C52-WD9000 | Owners Guide - Page 2
    USING THIS PROJECTION COLOR TV 7 Note 7 Location 7 The best spot for viewing 7 Connect the power cord and the antenna 8 Insert the batteries 8 FUNCTIONAL PARTS 9 Control panel and side panel 9 Rear panel 11 On the remote control unit 12 GETTING STARTED 13 Power on/off 13 Instructions for
  • Hitachi C52-WD9000 | Owners Guide - Page 3
    on the rating label pasted at the back of the TV set. Do not use the TV outside the specified voltage range. It may cause a fire cord or plug is damaged, please cut power supply immediately, then contact a service technician for inspection. gDo not overload wall outlets and extension cords as this
  • Hitachi C52-WD9000 | Owners Guide - Page 4
    with liquids or other objects, e.g. house plant, vase, tea sets, etc. In case liquids are spilled inside the TVˈplease remove the plug from the wall outlet immediately and contact a service technician. In addition, if rubber or vinyl products remain in contact with the cabinet or screen of the
  • Hitachi C52-WD9000 | Owners Guide - Page 5
    remove the outdoor antenna connection during lightning storms. gWhen going out or your TV is set to remain unused for a long periods of time, please turn vacuum cleaner, polish, sand paper to clean the cabinet or screen of the TV. 4.If accumulated dust cover the cabinet or screen, please use a soft,
  • Hitachi C52-WD9000 | Owners Guide - Page 6
    work properly, and you are unable to restore normal operation by following the "A guide to simple problem solving" section in your Instruction Manual, please unplug the set and consult service personnel. gIf the TV is dropped or the cabinet is damaged, remove the power plug immediately and contact
  • Hitachi C52-WD9000 | Owners Guide - Page 7
    PROJECTION COLOR TV Note This is not an integrated digital TV. To watch digital broadcast programs (if available), you have to purchase a Digital Set-Top Box that will receive and decode digital broadcast signals and input to the TV set. Do not place the TV where temperature is excessively high, for
  • Hitachi C52-WD9000 | Owners Guide - Page 8
    BEFORE USING THIS PROJECTION COLOR TV Connect the power cord and the antenna Please read the rating label pasted at the back of the TV set carefully, and then insert the plug into the power outlet conformity to the rating label. Optimum reception requires that an outdoor aerial or CATV
  • Hitachi C52-WD9000 | Owners Guide - Page 9
    DI I ON P U T 5 VOLUME UP/DOWN buttons(When the menu appears on the screen, press VOLŻ / VOLŹ buttons to select the menu left and right.) MANUAL FOCUS button TV/VIDEO selector PROGRAM UP/DOWN buttons (When the menu appears on the screen, press PROG Ÿ/ PROGź buttons to select the menu up and down
  • Hitachi C52-WD9000 | Owners Guide - Page 10
    control panel and side panel shown as below is designed for the C52-WD9000 model.) POWER button POWER indicator Remote control sensor Side panel input VOLŹ buttons to select the menu left and right.) MAGIC FOCUS button TV/VIDEO selector PROGRAM UP/DOWN buttons (When the menu appears on the
  • Hitachi C52-WD9000 | Owners Guide - Page 11
    /VARIABLE HDMI INPUT interface (Only for the C52-WD9000 model ) Fixed/Variable Audio output terminals TV AS CENTER input jacks Audio/Video input & Component input terminals 1,2 Note: 1. Before using these rear panel jacks, please refer to the INSTRUCTION MANUAL on page 49-52. 2. The C43-FL9000
  • Hitachi C52-WD9000 | Owners Guide - Page 12
    SURF 12 mode) MENU button (Page 14) See the remark. CH SURF button (Page 38,39) TV/VIDEO selector button (Page 46) PICTURE mode button (Page 45) AUDIO mode button (Page 45) DVD and up buttons. The characters cursor" shown in this instruction manual will be referring to the ŸP+ źP- buttons. 12
  • Hitachi C52-WD9000 | Owners Guide - Page 13
    up to indicate that the power is on. POWER button POWER indicator (C43-FL9000) (C52-WD9000) WHEN THE SET IS AT STANDBY The TV will be in standby mode and the blue power indicator becomes dimmer if the TV set is turned off using the button on the remote control unit. This indicates that
  • Hitachi C52-WD9000 | Owners Guide - Page 14
    unit. The words or symbols with frames refer to the buttons on the remote control unit. ƽThe Chinese characters on the TV screen are supplied by Rico Company. The logos and symbols used in this instruction manual are intended for explanation purposes, they might differ from those shown on the
  • Hitachi C52-WD9000 | Owners Guide - Page 15
    GETTING STARTED Selecting the on-screen display language You can choose from two different languages (Chinese and English) for the on-screen displays. When necessary, you may change the displayed language following the procedures below. 1 Press the MENU button to display menu as shown on the right.
  • Hitachi C52-WD9000 | Owners Guide - Page 16
    0+]  6HOHFW 6HW 5HWXUQ    bottom of menu, and the TV will begin the auto search  procedure and store all signals available in the has RF output, connect it with RF cable into the antenna input of the TV set, and refer to the Tuning section on page 23 for presetting. ˄3˅When you
  • Hitachi C52-WD9000 | Owners Guide - Page 17
    ON-SCREEN DISPLAY MENUǏPICTURE MENUǐ Picture Menu Picture menu allows you to adjust various picture settings such as brightness, color, contrast and sharpness. You can also adjust the settings for color temperature, dynamic contrast, etc. Please follow the steps below. 1 Press the MENU button to
  • Hitachi C52-WD9000 | Owners Guide - Page 18
     5HWXUQ Notes:˄1˅If Noise Reduction is set to High or Lowˈthe Sharpness option cannot be adjusted. ˄2˅While Film Mode is on, your projection TV will activate the circuitry for special feature to improve the video performance when viewing film based sources. ˄3˅When HD or Progressive signals are
  • Hitachi C52-WD9000 | Owners Guide - Page 19
    ON-SCREEN DISPLAY MENUǏAUDIO MENUǐ Audio Menu Audio menu allows you to adjust various sounds settings such as treble, bass and balance. You can also adjust the settings for surround effect etc. Please follow the steps below. 1 Press the MENU button to display menu. Press the Ÿ ź cursor buttons to
  • Hitachi C52-WD9000 | Owners Guide - Page 20
    countdown after quitting the Timer menu. After 1 hour and 25 minutes, the TV will go into standby mode. 7LPHU ź  2Q 2II $XWR2II and there is no more broadcasting transmission (i.e. no signal is detected), the TV will go into standby mode automatically after 60 minutes. If Auto Off
  • Hitachi C52-WD9000 | Owners Guide - Page 21
    option as shown on the right. Note: The menu of the C43-FL9000 model as shown on the right does not include the TV P.Size option and the Auto P.Size option. )XQFWLRQź 6FDQ0RGHŹ  3URJUHVVLYH 7936L]H ([SDQGHG $XWR36L]H 2Q 0XOWL3LFWXUH  5HVHW  䗝6乍HOHFW 6HW
  • Hitachi C52-WD9000 | Owners Guide - Page 22
    DISPLAY MENUǏFUNCTION MENUǐ 4 Follow the steps on page 21 to enter the Function menu and select the TV P.Size option as shown on the right. Press the Ż Ź cursor buttons to set the TV P.Size option to Expanded, 4:3 or 16:9 mode. Note: 1. Please refer to page 42-43 for information on this
  • Hitachi C52-WD9000 | Owners Guide - Page 23
    ON-SCREEN DISPLAY MENUǏSETUP MENUǐ ǏPreset: TuningǐYou can perform search, skip, color system, sound system, program name,etc. on the Tuning menu. When the Easy Preset tuning is not desirable, you can adopt the following method to select programs. 1 Press the MENU button to display menu. Press the
  • Hitachi C52-WD9000 | Owners Guide - Page 24
    0+] 2II $XWR $XWR 2II 5HWXUQ In this way, you can manually select the desired program easily. Also, you can receive programs from RF output using a particular Program Number. Select the Search option and press the TV/VIDEO button on the remote control unit to select AV1, AV2, etc
  • Hitachi C52-WD9000 | Owners Guide - Page 25
    , as this will automatically determine what system is being broadcast. However, some weak broadcast signals might cause incorrect judgment by the TV and it may become necessary to allocate a particular system to that program number. 7XQLQJ  7XQLQJ0RGH 5 3URJUDP1XPEHU  6HDUFK
  • Hitachi C52-WD9000 | Owners Guide - Page 26
    to display the menu as shown on the right. Press the Ÿ ź cursor buttons to select the AV Mode option and the Ż Ź cursor buttons or the TV/VIDEO button to select AV1, AV2, AV3, AV4 or AV5.  6HOHFW 6HW    5HWXUQ Press the Ÿ ź cursor buttons to select the Color System  option, then press
  • Hitachi C52-WD9000 | Owners Guide - Page 27
    ON-SCREEN DISPLAY MENUǏSETUP MENUǐ ǏPreset˖Fine TuningǐIt is unnecessary to fine tune in normal receiving condition. However, fine tuning is required in some areas where the broadcasting signals are weak. Please follow the steps as shown below. 1 Follow the steps on page 23 to enter the Preset menu
  • Hitachi C52-WD9000 | Owners Guide - Page 28
    ON-SCREEN DISPLAY MENUǏSETUP MENUǐ ǏPreset: Prog.ExchangeǐThe menu allows you to set the program to your desired channel position. Please follow the steps below. 1 Follow the steps on page 23 to enter the Preset menu, then select the Prog. Exchange option as shown on the right. 3UHVHWź
  • Hitachi C52-WD9000 | Owners Guide - Page 29
    from the antenna terminal. You can set the antenna attenuation to prevent such problem. Please follow the steps below. Follow the steps on page 23 to enter  ǏPreset˖Auto MuteǐIf Auto Mute is On, the noise from TV will be controlled when there is no signal transmission from the antenna terminal
  • Hitachi C52-WD9000 | Owners Guide - Page 30
    when its power is on, and there is an output signal from these external equipment, Auto Link function will $XWR/LQNź  automatically switch the TV from the TV channel or any $9 2Q other AV modes to AV1 or AV5 mode accordingly. $9 2Q (2)If you switch on the power of the external
  • Hitachi C52-WD9000 | Owners Guide - Page 31
    VARIABLE AUDIO output terminals will be variable. You can control the volume by pressing Volume up/down buttons on the remote control unit of the TV set. Note: Please lower the volume of equipment to prevent damage to its speakers or hearing distorted sound when connecting the FIXED/VARIABLE AUDIO
  • Hitachi C52-WD9000 | Owners Guide - Page 32
    (Do not move the TV during this auto convergence process.) MANUAL CONVERGENCE For the C52-WD9000 model, press and hold for 3 minutes from the remote control unit, the TV will exit from MANUAL CONVERGENCE mode. Note*1˖The TV has three color projection tubes: one for red, one for green and one
  • Hitachi C52-WD9000 | Owners Guide - Page 33
    for the C43-FL9000 model.˅ The Multi Picture function of this projection TV provides two modes, Split and P in P. To use the Multi red symbol will appear on top of the selected picture, indicating: ˄1˅The TV speakers will output the sound from the selected   picture. ˄2˅The monitor
  • Hitachi C52-WD9000 | Owners Guide - Page 34
    Multi Picture option to P in P mode, then exit from the menu. ƽIn normal TV mode, press the MULTI PIC. button to enter the P in P mode as shown below signal formats are valid for P in P. Even if the signal may be displayed in TV mode before entering P in P, it may not be displayed while in the P in
  • Hitachi C52-WD9000 | Owners Guide - Page 35
    shown as below is designed for the C52-WD9000 model.˅ The Multi Picture function of this projection TV provides two modes, Split and P in red symbol will appear on top of the selected picture, indicating: ˄1˅The TV speakers will output the sound from the selected picture.   ˄2˅The monitor
  • Hitachi C52-WD9000 | Owners Guide - Page 36
    as shown on the right. Press the Ż Ź cursor buttons to set the Multi Picture option to P in P mode, then exit from the menu. ƽIn normal TV mode, press the MULTI PIC. button to enter the P in P mode as shown below. Picture A and B will show the programs of two channels respectively. 0XOWL
  • Hitachi C52-WD9000 | Owners Guide - Page 37
    symbol will appear on top of the selected picture, indicating: ˄1˅The TV speakers will output the sound from the selected picture. ˄2˅The monitor out are valid for P in P. Sometimes, the signal may be able to be displayed in TV mode before entering P in P, it may not be able to be displayed once in
  • Hitachi C52-WD9000 | Owners Guide - Page 38
    to set the CH Surf option to mode 3, then exit from the menu. ƽIn normal TV mode, press the CH SURF button to enter mode 3 (4-Picture display mode) as shown valid for mode 3. Sometimes the signal may be able to be displayed in TV mode before entering mode 3, it may not be able to be displayed once
  • Hitachi C52-WD9000 | Owners Guide - Page 39
    Picture menu and select the Freeze option. Press the Ż Ź cursor buttons to set the Freeze option to Strobe, then exit from the menu. ƽIn normal TV mode, press the FREEZE button to enter the mode 12 automatically. The 12th picture will display the current active program. The other 11 pictures will
  • Hitachi C52-WD9000 | Owners Guide - Page 40
    displayed on the screen. PAGE / Increase/ decrease the page number. CANCEL This button is used to return the screen to the TV mode temporarily while the TV is searching a required text page. Press this button again to display the teletext screen. MODE This button is used to switch between
  • Hitachi C52-WD9000 | Owners Guide - Page 41
    16:9NJandlj16:9ZoomNJ. Remark: If you change program No. or power on the TV, the aspect mode will return to the mode of lj16:9NJ(when HD signal is received ) or lj4:3NJ(when conventional signal is received). Notes˖ 1ˊ Do not watch TV at non full screen, as this may cause damage to your PRT. 2ˊ Using
  • Hitachi C52-WD9000 | Owners Guide - Page 42
    FUNCTIONS ASPECT MODE ˄The function shown as below is designed for the C52-WD9000 model.˅ You may set different aspect modes to view the image with different signal formats. ǏTV P.Sizeǐ This function is available for conventional TV broadcast (RF) signal input. When other non RF signals are received
  • Hitachi C52-WD9000 | Owners Guide - Page 43
    ljNJ lj˖=RRPNJ6FUROO ƽIf you change program No. or power on the TV, the aspect mode will not change. 3. When HD component signal is received :9NJ,ljExpandedNJandlj16:9ZoomNJ. ƽIf you change program No. or power on the TV, the aspect mode will return to the mode of lj16:9NJ. Please see the
  • Hitachi C52-WD9000 | Owners Guide - Page 44
    the aspect mode will switch between six different modes, lj16:9NJ,lj16:9ZoomNJ, lj4:3NJ,ljExpandedNJ,lj4:3Zoom1NJ and lj4:3Zoom2NJ. If you change program No. or power on the TV, the aspect mode will not change. ƽSet the Auto P.Size option to On To press the P.SIZE button, the aspect mode will switch between six
  • Hitachi C52-WD9000 | Owners Guide - Page 45
    button, followed by the ķbutton. Brands of DVD Player HITACHI PIONEER PANASONIC TOSHIBA PHILIPS JVC SAMSUNG SONY RCA MITSUBISHI ONKYO ZENITH , RECALL , INDEX RECALL , MODE RECALL , SUB RECALL , REVEAL RECALL , TV/TEXT RECALL , CANCEL Note˖Not all models of the listed brands can be operated using
  • Hitachi C52-WD9000 | Owners Guide - Page 46
    . or AV No. and the related information. Pressing the RECALL button again, the display will disappear. ķWhen receiving in the TV mode: A few seconds later A few seconds later  0+]   3LFWXUH)DYRULWH $XGLR)DYRULWH 6FDQ+] 36L]H AUDIO MODE STEREO MONO I MAIN II
  • Hitachi C52-WD9000 | Owners Guide - Page 47
    OTHER FUNCTIONS ˄The function shown as below is designed for the C52-WD9000 model.˅ HD SIGNAL THROUGH MODE This TV incorporates a HD signal through mode to display more actual HD picture. When receiving HD signal, you can switch between the HD signal through and HD
  • Hitachi C52-WD9000 | Owners Guide - Page 48
    of the standard video cable. 3.If your equipment has a mono sound output, please insert the audio cable into the left audio (L/MONO) jack of your TV. 48
  • Hitachi C52-WD9000 | Owners Guide - Page 49
    INPUT 4 INPUT 3 INPUT 2 Y/ VIDEO INPUT 1 Y/ VIDEO S-VIDEO PB CB PB CB VIDEO PR CR PR CR (MONO) (MONO) (MONO) (MONO) L AUDIO R TV AS CENTER FIXED/VARIABLE RU RU L R INPUT VIDEO L R INPUT 6WHUHRV\VWHP 9&5 Y CB CR L R S-VIDEO VIDEO L R OUTPUT o៪r OUTPUT Y PB PR
  • Hitachi C52-WD9000 | Owners Guide - Page 50
    C52-WD9000 model.˅ ǏThe typical connection of rear panel 2ǐ HDMI INPUT MONITOR OUT INPUT 4 INPUT 3 INPUT 2 Y/ VIDEO INPUT 1 Y/ VIDEO S-VIDEO PB CB PB CB VIDEO PR CR PR CR (MONO) (MONO) (MONO) (MONO) L AUDIO R TV HDMI INPUT interface as shown on the TV set above. When using a component
  • Hitachi C52-WD9000 | Owners Guide - Page 51
    MONITOR OUT INPUT 4 INPUT 3 INPUT 2 Y/ VIDEO INPUT 1 Y/ VIDEO S-VIDEO PB CB PB CB VIDEO L PR CR PR CR (MONO) (MONO) (MONO) (MONO) AUDIO R TV AS CENTER FIXED/VARIABLE CENTER OUT 6WHUHRV\VWHP'9'SOD\HUHWF L R L R CENTER FRONT OUT OUT 6WHUHRV\VWHP '9'SOD\HUHWF REAR OUT
  • Hitachi C52-WD9000 | Owners Guide - Page 52
    and connections of rear panel 1.Refer to the operation manual of your electronic equipment for additional information on connections. there are signals input from the same group of S-VIDEO and VIDEO terminals, the TV will receive signal from S-VIDEO and the characters S and AV3 or AV4 will appear
  • Hitachi C52-WD9000 | Owners Guide - Page 53
    as a radio. Please place the radio equipment away from the TV set. Accessories No. Description 1 Instruction manual 2 Remote control unit (CLE-962) 3 Battery (For CLE-962) 4 Caster holder 5 Antenna adapter Quantity 1 1 2 4 1 C43-FL9000 Yes Yes Yes Yes Yes C52-WD9000 Yes Yes Yes Yes Yes 53
  • Hitachi C52-WD9000 | Owners Guide - Page 54
    ) FP FP  Refer to the values as indicated on the rating label pasted at the back of the TV set. 3 6(&$0%*'. 176& 0176& 176 176 3$/6(&$0 Totalscanlines 1125i 750p 625p 625i 525p 525i Active scan lines 1080i 720p
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
Thank you for your purchasing
HITACHI
projection TV products.
In order to use the Projection color TV properly, please read this instruction manual
carefully before using it.
INSTRUCTION MANUAL
Projection Color Television