Hitachi CP-A200 User Manual
Hitachi CP-A200 Manual
 |
View all Hitachi CP-A200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi CP-A200 manual content summary:
- Hitachi CP-A200 | User Manual - Page 1
Projector CP-A200 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read all manuals for this product. Be sure to read "Safety Guide" first. After reading them, store them in a safe place for future reference. About this - Hitachi CP-A200 | User Manual - Page 2
the picture position 20 Replacing the lamp 59 Adjusting the focus 21 Maintaining the air-filter 61 Using the automatic adjustment feature . . 21 Caring for the mirror and lens. . . . . . 63 Correcting distortion 22 Other care 64 Using the magnify feature 23 Troubleshooting 65 Freezing the - Hitachi CP-A200 | User Manual - Page 3
Projector features / Preparations Projector features This product realizes the large projection image of various image signals, even if in a small space. This product can offer you convenience and various uses by the following features. ü The unique lens and mirror system realizes ultra short - Hitachi CP-A200 | User Manual - Page 4
Elevator feet (20) (14) Internal threads These are threads for optional mounting accessories. (15) Lens (16, 63, 71) (16) Mirror lamp lights, since the projection lamp ray may cause a trouble on your eyes. CAUTION ►Do not touch the lamp cover or approach the exhaust vents while using the projector - Hitachi CP-A200 | User Manual - Page 5
is displayed (&24), or Cursor ▲, ▼ buttons when a menu is displayed (&24). The buttons on the projector work only as the cursor buttons while the template is displayed (&43). (1) LAMP (2) TEMP (3) POWER STANDBY/ON (4) INPUT (6) MENU FOCUS - (5) (7) + FOCUS Ports (&10, Technical's 3 to - Hitachi CP-A200 | User Manual - Page 6
Part names Remote control (1) COMPUTER button (&18) (2) MY SOURCE/DOC.CAMERA button (&18, 46) (3) VIDEO button (&18) (4) STANDBY/ON button (&16, 17) (5) AUTO button (&21) (6) SEARCH button (&19) (7) ASPECT button (&19) (8) BLANK button (&23) (9) FREEZE button (&23) (10) MAGNIFY - ON button (&23) (11 - Hitachi CP-A200 | User Manual - Page 7
of 30 cm or more between the sides of the projector and other objects such as walls. Refer to the following to decide the projection style. For the case of installation in a special state such as ceiling mount, the specified mounting accessories and service may be required. Before installing the - Hitachi CP-A200 | User Manual - Page 8
to 100 inch diagonal. The screen image adjusted out of this range, either smaller or larger, may be deteriorated. • The screen position may be shifted after installation if the projector is suspended on a ceiling or somewhere, since the body of this projector is made of plastics. If readjustment - Hitachi CP-A200 | User Manual - Page 9
such as a wobbly or inclined stand. • Do not place the projector on its side, front or rear position. • Consult with your dealer before a special installation such as suspending from a ceiling or somewhere else. ►Place the projector in a cool place, and ensure that there is sufficient ventilation - Hitachi CP-A200 | User Manual - Page 10
on or pinched by items placed upon or against them. CAUTION ►Do not connect or disconnect the projector with devices while they are connected to a power supply, except for the cases directed by the manuals. ►Be careful not to set a connector into a wrong port or with a wrong way. (continued on next - Hitachi CP-A200 | User Manual - Page 11
laptop PC to the projector, be sure to activate the PC's external RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the instruction manual of the corresponding laptop PC. • When the picture resolution is changed on - Hitachi CP-A200 | User Manual - Page 12
power cord. Then follow the procedure below for connection. 1. Insert the end of the power cord with the socket into the AC inlet of the projector. 2. Plug the other end of the power cord into a power outlet. AC Inlet Power cord (with the socket) WARNING ►Be careful of operation for a power - Hitachi CP-A200 | User Manual - Page 13
Using the security bar and slot This projector has the security bar for a commercial anti-theft chain or wire up to 10 mm in diameter, and also the security slot for the Kensington lock. For details, see the manual of the security tool. NOTE • These are not provided as comprehensive theft - Hitachi CP-A200 | User Manual - Page 14
or two new batteries of the specified type: HITACHI MAXELL, part number LR6 or R6P. Follow works with the remote sensors on the projector using infrared light (Class 1 LED). The water. When a battery leaked in the battery holder, replace the batteries after wiping the leakage out. • Make sure - Hitachi CP-A200 | User Manual - Page 15
Mode 1:NORMAL... VOLUME- and RESET buttons ESC RESET (2) Set to Mode 2:HIGH... MAGNIFY OFF and ESC buttons Please remember that the REMOTE FREQ. in the SERVICE item of the OPTION menu (49) of the projector to be controlled should be set to the same mode as the remote control. 15 - Hitachi CP-A200 | User Manual - Page 16
STANDBY/ON button (44). • Install the projector in the way specified in this manual. Otherwise the projection lamp may not light. WARNING ►Never look into the projection lens or mirror while the projection lamp lights, since the projection lamp ray may cause a trouble on your eyes. ►Do not touch - Hitachi CP-A200 | User Manual - Page 17
mentioned in the manuals. For this projector, follow the procedure below. 1. Press the STANDBY/ON button (on the projector or remote control). LAMP TEMP POWER STANDBY/ON INPUT ● For cooling the projector down, wait for the POWER indicator to stop blinking and turn steady orange. The projector - Hitachi CP-A200 | User Manual - Page 18
set to AUTO and the input signal supports the C.C. feature (58). - FOCUS + POSITION - D-ZOOM + MENU ESC ENTER RESET Selecting an input signal INPUT button 1. Press INPUT button on the projector. Each time you press the button, the projector switches its input INPUT port from the current - Hitachi CP-A200 | User Manual - Page 19
check its input ports as below in order to find any input signals. When an input is found, the projector will stop searching and display the image. If no signal is found, the projector will return to the state selected before the operation. SEARCH button MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT - Hitachi CP-A200 | User Manual - Page 20
projector, and result in an injury. ►Tilt the projector with these elevating feet only. ►Do not tilt the projector over 5 degrees, when it is suspended from a ceiling is disappeared. ● If you want to expand a part of the image, use the magnify function (23). MY SOURCE/ VIDEO COMPUTER DOC.CAMERA - Hitachi CP-A200 | User Manual - Page 21
on screen by pushing the MENU button on the projector. ● The buttons on the projector work only as the cursor buttons while the template set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use SERVICE item in the OPTION menu (47). 21 - Hitachi CP-A200 | User Manual - Page 22
(2) PERFECT FIT displays a dialog for adjusting the shape of the projected image in each of the corners and sides. Even if you do not do the distortion is adjusted with the PERFECT FIT function, keystone adjustment feature is unavailable. To correct the keystone distortion, reset the adjustment - Hitachi CP-A200 | User Manual - Page 23
mode when some control POSITION buttoMEnNU s are pressed. ENTER ● If the projector continues projecting a still image for a long time, the LCD panel might ESC RESET possibly be burned in. Do not leave the projector in the FREEZE mode for too long. Temporarily blanking the screen BLANK - Hitachi CP-A200 | User Manual - Page 24
Operating Using the menu function This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, C.C. ON VOLUME 㧗 operations of these menus are as follows. OFF MENU button LAMP TEMP POWER STANDBY/ON KEYSTONE MY BUTTON MUTE 1 2 ENTER button MENU button - Hitachi CP-A200 | User Manual - Page 25
Operating Using the menu function (continued) In the Advanced Menu 2. Use the ▲/▼ cursor buttons to select a menu. If you want to change it to the EASY MENU, select EASY MENU. Then press the ► cursor button, or ENTER button to select an item. The lower layer menu of the selected item will appear. - Hitachi CP-A200 | User Manual - Page 26
the horizontal keystone distortion. See the KEYSTONE item in SETUP menu (36). Pressing the ► button displays the dialog for adjusting the shape of the projected image in each of the corners and sides. See the PERFECT FIT item in SETUP menu (37). Using the ◄/► buttons switches the picture mode. The - Hitachi CP-A200 | User Manual - Page 27
(40). Go to Advanced Menu... Select "Go to Advanced Menu..." on the menu, and press the ► or ENTER button to use the menu of PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION or C.C.. 27 - Hitachi CP-A200 | User Manual - Page 28
PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description BRIGHTNESS Using - Hitachi CP-A200 | User Manual - Page 29
PICTURE menu PICTURE menu (continued) Item Description Using the ▲/▼ buttons switches the color temperature mode. #1 HIGH DEFAULT � #1 HIGH CUSTOM � #2 MID DEFAULT � � #6 Hi-BRIGHT-3 CUSTOM #2 MID CUSTOM � � #6 Hi-BRIGHT-3 DEFAULT #3 LOW DEFAULT � � #5 Hi-BRIGHT-2 CUSTOM #3 LOW - Hitachi CP-A200 | User Manual - Page 30
ó Weak • There may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. This projector has 4 memories for adjustment data (for all the items of PICTURE menu). Selecting a function using the ▲/▼ buttons and pressing the ► or ENTER button - Hitachi CP-A200 | User Manual - Page 31
button to execute the item. Then perform it according to the following table. IMAGE menu Item Description Using the ▲/▼ buttons switches the mode for aspect ratio. may appear at the frame area of the picture. In such a case, please adjust small. V POSITION Using the ▲/▼ buttons adjusts the - Hitachi CP-A200 | User Manual - Page 32
IMAGE menu IMAGE menu (continued) Item H POSITION H PHASE H SIZE AUTO such a case, please reset the adjustment by pressing the RESET button during this operation. Executing this item performs the automatic adjustment feature. For a the AUTO ADJUST item of the SERVICE item in the OPTION menu (47). - Hitachi CP-A200 | User Manual - Page 33
of the picture for a quick moving object. In such a case, please select TURN OFF, even though the screen image may lose the sharpness. Using the ▲/▼ buttons switches the noise reduction for a SCART RGB input to the projector. For your reference, see the TECHNICAL part. (continued on next page) 33 - Hitachi CP-A200 | User Manual - Page 34
ON G OFF Selecting AUTO allows reception of sync on G signal. • When AUTO is selected, the picture may be distorted with certain input signals. In such a case, remove the signal connector first and select SYNC ON G OFF on the menu, and then reconnect the signal. Refer to "Technical" on how to input - Hitachi CP-A200 | User Manual - Page 35
IN1 and IN2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. (2) In the RESOLUTION menu, select the resolution you wish to display using the ▲/▼ buttons. Selecting AUTO will - Hitachi CP-A200 | User Manual - Page 36
or the PERFECT FIT (37) is adjusted. KEYSTONE Using the ▲/▼ buttons corrects the horizontal keystone distortion. Shrink the right of the image ó Shrink the left of the image • The adjustable range of this function will vary among inputs. For some input, this function may not work well. • When the - Hitachi CP-A200 | User Manual - Page 37
allows you to adjust the shape of the projected image in each of the corners and sides. (1) adjusted with the PERFECT FIT function, keystone adjustment feature is unavailable. To correct the keystone distortion, will be displayed when projector is restarted after the power switch is turned off. - Hitachi CP-A200 | User Manual - Page 38
communication control (RS-232C) is disabled except to turn the projector on while the projector is in the standby mode. • When SAVING is selected into the port selected in the (2) is output to the MONITOR OUT port while an image from the port chosen in the (1) is on screen. (1) Choose a picture input - Hitachi CP-A200 | User Manual - Page 39
port can be arranged in the menu. The audio coming into the port selected in the (2) is output while an image from the port chosen in the (1) is on screen. (1) Choose a picture input port using the ▲/▼ buttons. of the C.C. menu and the signal from the input port supports the C.C. feature (58). 39 - Hitachi CP-A200 | User Manual - Page 40
up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF START UP MyScreen ORIGINAL TURN OFF Feature Screen can be registered by the MyScreen item (41). Screen preset as the standard screen. Plain black screen. • To avoid remaining as an - Hitachi CP-A200 | User Manual - Page 41
. To stop performing, press the RESET or ESC button. 2. U sing the buttons adjusts the frame position. Please move the frame to the position of the image which you want to use. The frame may not be able to be moved for some input signals. To start registration, press the ENTER button - Hitachi CP-A200 | User Manual - Page 42
while the TURN OFF is selected, the picture on screen is frozen without any messages, which is not a malfunction (23). Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. The SOURCE NAME menu - Hitachi CP-A200 | User Manual - Page 43
SCREEN menu SCREEN menu (continued) Item TEMPLATE Description Using the ▲/▼ buttons switches the mode for the template screen. Press the ► button to display the selected template, and press the ◄ button to close the displayed screen (5). The last selected template is displayed when the MY BUTTON - Hitachi CP-A200 | User Manual - Page 44
will stop searching and display the image. COMPUTER IN1 COMPUTER IN2 VIDEO S-VIDEO COMPONENT DIRECT POWER ON Using the ▲/▼ buttons turns on/off the DIRECT POWER ON function. TURN ON TURN OFF When set to the TURN ON, the lamp in projector will be automatically turned on without the - Hitachi CP-A200 | User Manual - Page 45
max. 99 minutes) ó Short (min. 0 minute = DISABLE) AUTO POWER OFF When the time is set to 0, the projector is not turned off automatically. When the time is set to 1 to 99, and when the passed time with nosignal or an unsuitable signal reaches at the set time, the projector lamp will be turned off - Hitachi CP-A200 | User Manual - Page 46
. Select the picture input that is connected with a document camera. COMPUTER (IN)1 COMPUTER (IN)2 VIDEO S-VIDEO COMPONENT Selecting this item displays the SERVICE menu. Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button to execute the item. FAN SPEED AUTO - Hitachi CP-A200 | User Manual - Page 47
image, signal cable to the projector, environment around the projector, etc., the automatic adjustment may not work correctly. In such a case not appear. Utilize this feature to keep the air-filter clean, setting the suitable time according to your environment of this projector. • Please check and - Hitachi CP-A200 | User Manual - Page 48
feature. When TURN ON is selected, the FOCUS +/- buttons on the remote and projector are disabled. TURN ON ó TURN OFF • Please use the function to avoid a mischief and touching accidentally. SERVICE for some reason, the image may shift or have keystone distortion. In that case use the LENS DOOR OPEN - Hitachi CP-A200 | User Manual - Page 49
OPTION menu OPTION menu (continued) Item SERVICE (continued) Description REMOTE RECEIV. (1) sensor is on. REMOTE FREQ. Use the ▲/▼ button to change the projector's remote sensor setting. 1:NORMAL ó 2:HIGH Items with a checkmark are on LAMP TIME, FILTER TIME, LANGUAGE and SECURITY settings are not reset - Hitachi CP-A200 | User Manual - Page 50
menu OPTION menu (continued) Item SECURITY Description This projector is equipped with security functions. User registration is required before using the security functions. Please contact your local dealer. 1. Using Security Features 1.1 Inputting the PASSWORD 1.1-1 Use the ▲/▼ buttons on the - Hitachi CP-A200 | User Manual - Page 51
or press and hold the INPUT and ► buttons on the projector for about 3 seconds. The 10-digit Inquiring Code will be PASSWORD will be sent after your user registration information is confirmed. SECURITY ( and prevent the currently registered MyScreen image from being overwritten. 2.1 Turning on - Hitachi CP-A200 | User Manual - Page 52
dealer with the 10-digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. 3. Using the PIN LOCK Function PIN LOCK is a function which prevents the projector from being used unless a registered Code is input. 3.1 Registering the PIN Code 3.1-1 Use - Hitachi CP-A200 | User Manual - Page 53
projector is restarted after AC power projector projector will turn off. Afterwards the projector will turn off every time an incorrect PIN Code is input. The projector only when the projector is started after input 3 times, the projector will be shut down projector will turn off. 3.3-2 Contact - Hitachi CP-A200 | User Manual - Page 54
set to TURN ON and if the setting condition of the projector (normal use or ceiling mounted) or mirror setting is changed from previous record, the Transition Detector alarm will be displayed and the projector will not display the input image. Set the Transition Detector off in the SECURITY menu to - Hitachi CP-A200 | User Manual - Page 55
-digit Inquiring Code will be displayed inside the box. 4.4-3 Contact your dealer with the 10-digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. (continued on next page) 55 - Hitachi CP-A200 | User Manual - Page 56
be displayed on the START UP screen. Whichever is selected, the MY TEXT will be displayed on the INPUT-INFORMATION- when the INFORMATION on the SERVICE menu is chosen. • This function is available only when the MY TEXT PASSWORD function is set to the TURN OFF. (continued on next page) 56 - Hitachi CP-A200 | User Manual - Page 57
time. NOTE PASSWORD BOX Pressing the ENTER button on the remote control or INPUT button on the projector will return to the MY TEXT PASSWORD on/off menu. When the PASSWORD is set for the 10 digit inquiring code. Your PASSWORD will be sent after your user registration information is confirmed. 57 - Hitachi CP-A200 | User Manual - Page 58
or 480i@60 Component video source supporting C.C. feature to utilize this function. Item Description depending on equipment or signal source. In this case, please turn off the Closed Caption. Select Closed such as news reports or a TV program guide. The information covers the entire screen. Not - Hitachi CP-A200 | User Manual - Page 59
about 45 minutes as it is. When the projector is mounted on a ceiling or somewhere over your head, or when the lamp may have been broken, be sure to refer replacement to your dealer or service person, since it may be dangerous. Only in case of replacement by yourself, follow the following procedure - Hitachi CP-A200 | User Manual - Page 60
the projector is suspended from a ceiling or somewhere over your head. This is dangerous, since if the lamp's bulb has broken, the shards will fall out when the cover is opened. In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is - Hitachi CP-A200 | User Manual - Page 61
too soiled, replace the filter unit. To prepare the new filter unit, call your dealer and tell the type number: UX35381 1. Turn the projector off and then slide the filter unit into place. 7. Plug in and restart the projector (12, 16). Then, reset the filter time (which is the time counter for the - Hitachi CP-A200 | User Manual - Page 62
Maintenance Maintaining the air-filter (continued) NOTE • A filter unit of specified type will come with the replacement lamp for this projector. Replacing the filter unit at the same time with the lamp is recommended. • Please reset the filter time only when you have cleaned the air-filter, for a - Hitachi CP-A200 | User Manual - Page 63
VIDEO L AUDIO IN3 Blower NOTE • When the lens door is closed manually, it may not shut properly. • The lens door may not SERVICE item in the OPTION menu (48). WARNING ►Before caring for the projection mirror and lens, turn the projector off and unplug the power cord, then cool the projector - Hitachi CP-A200 | User Manual - Page 64
. CAUTION ►Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc. ►Do not use cleaners or chemicals other than those specified in this manual. ►Do not polish or wipe with hard - Hitachi CP-A200 | User Manual - Page 65
to your dealer or service company. Otherwise if a problem occurs with the projector, the following checks and measures are recommended before requesting repair. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied - Hitachi CP-A200 | User Manual - Page 66
Troubleshooting Regarding the indicator lamps When operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER TEMP LAMP indicator indicator indicator Description Lighting Turned Turned The projector is in a standby state. - Hitachi CP-A200 | User Manual - Page 67
lamps (continued) Troubleshooting POWER TEMP LAMP indicator indicator indicator Description Blinking In Red or Lighting In Red Lighting In Red Turned off There is a possibility that the interior portion has become heated. Please turn the power off, and allow the projector of SERVICE item - Hitachi CP-A200 | User Manual - Page 68
outage (blackout), etc. Please disconnect the power plug from the power outlet, and allow the projector to cool down at least 10 minutes, then turn the power on again. Either there is no lamp and/or lamp cover, or either of these has not been properly fixed. Please turn the power off and - Hitachi CP-A200 | User Manual - Page 69
Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine is not fully opened. Use the LENS DOOR OPEN function, or turn the projector off and on again. The signal cables are not correctly connected. Correctly connect the - Hitachi CP-A200 | User Manual - Page 70
Cases Replace the lamp. Either the focus and/or horizontal phase settings are not properly adjusted. Adjust the focus using the focus ring, and/or H PHASE using the menu function. The lens or mirror is dirty or misty. Clean the lens or mirror referring to the section "Caring for the lens". Projector - Hitachi CP-A200 | User Manual - Page 71
Lamp Audio output Power supply Power consumption Temperature range Ports Optional parts Weight (mass) Size Specifications Specifications Liquid crystal projector mini x 1 CONTROL D-sub 9 pin x 1 Lamp: DT00893 Filter unit: UX35381 Soft case: CA100 * For more information, contact to your dealer - Hitachi CP-A200 | User Manual - Page 72
Specifications Specifications (continued) 379 356 391 397 225 113 131 139 [unit: mm] 72
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
 |
 |
1
Projector
CP-A200
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this
product. Be sure to read “Safety Guide” first. After reading them, store them in a
safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
• Mac
®
is registered trademarks of Apple Inc.
• VESA and DDC are trademarks of Video Electronics Standard Association.
• Windows
®
is a registered trademark of Microsoft Corporation in the U.S. and/or
other countries.
• Blu-ray Disc
TM
is a trademark of the Blu-ray Disc Association.
All other trademarks are the properties of their respective owners.
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.