Hitachi CP-AW250N User Manual

Hitachi CP-AW250N Manual

Get Hitachi CP-AW250N PDF manuals and user guides View all Hitachi CP-AW250N manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi CP-AW250N manual content summary:

  • Hitachi CP-AW250N | User Manual - Page 1
    Projector CP-AW250N User's Manual (detailed) Operating Guide (Type nos. CP-AW250N, CP-AW250NM) Thank you for purchasing this projector. WARNING ►Before using this product, please read all manuals for this product. Be sure to read "Safety Guide and High-Definition Multimedia Interface are trademarks
  • Hitachi CP-AW250N | User Manual - Page 2
    PC mouse & keyboard. . . 17 Auto power off, Usb type b, Lamp time, Power on/off 18 Filter time, My button, My source, Turning on the power 18 Service Turning off the power 19 NETWORK menu 64 Operating 20 Setup, Projector name, My image, Adjusting the volume 20 Amx d.d., Presentation
  • Hitachi CP-AW250N | User Manual - Page 3
    realizes ultra short distance projection,which gives you more various way of use. ü The motorized lens door offers you very simple use of the projector. ü T he double layer filter system is expected to function longer and offers you less maintenance frequency. ü The HDMI port can support various
  • Hitachi CP-AW250N | User Manual - Page 4
    Introduction Part names Projector (1) Lamp cover (&89) The lamp unit is inside. (2) Control panel (&5) (3) Elevator feet (x 2) (&23) (4) Remote sensor (&16) (5) Lens (&94) (6) Intake vents (7) Filter cover (&91) The air filter and intake vent are inside. (8) Battery cover The internal clock
  • Hitachi CP-AW250N | User Manual - Page 5
    99) (5) LAMP indicator (&98, 99) Buttons (6) FOCUS +/- buttons when FOCUS +/- function is invalid when the USB TYPE A port is selected as the input source. (7) MENU buttons when no menu is displayed (&28), or Cursor ▲/▼ buttons when a menu is displayed (&28). The buttons on the projector
  • Hitachi CP-AW250N | User Manual - Page 6
    Introduction Remote control (1) VIDEO button (&21) (2) COMPUTER button (&21) (3) SEARCH button (&22 - 1 button (&56) (18) MY BUTTON - 2 button (&56) (19) KEYSTONE button (&25) (20) FOCUS - button (&24) (21) FOCUS + button (&24) (22) D-ZOOM - button (&23) (23) D-ZOOM + button (&23) (24) POSITION
  • Hitachi CP-AW250N | User Manual - Page 7
    dealer or service personnel. • The projected image position and/or focus may change during warm-up (approx. 30 minutes after the lamp is turned on) or when the ambient conditions change. Readjust the image position and/or focus as necessary. • Since the projector features an ultra short throw, be
  • Hitachi CP-AW250N | User Manual - Page 8
    , and leave installing and removing the projector with the mounting accessories to the service personnel. • Read and keep the user's manual of the mounting accessories used. CAUTION ►Avoid placing the projector in smoky, humid or dusty place. Placing the projector in such places could cause fire
  • Hitachi CP-AW250N | User Manual - Page 9
    the projector to a device, consult the manual of the device to confirm that the device is suitable for connecting with this projector and . After making sure that the device and projector are turned off, connect them following the instructions below. WARNING ►Use only the appropriate accessories
  • Hitachi CP-AW250N | User Manual - Page 10
    type of connection is attempted. - Please use the standard drivers in your computer as this projector is a Plug-andPlay monitor. • When AUTO is selected USB TYPE B port as a picture input port from the computer, or use the remote control as a simple mouse and keyboard of the computer. (17, 54). VCR
  • Hitachi CP-AW250N | User Manual - Page 11
    supported by this projector. - Although the projector can display signals with resolution up to UXGA (1600X1200), the signal will be converted to the projector the computer's manual for the setting. • Depending on the input signal, the automatic adjustment function of this projector may take some
  • Hitachi CP-AW250N | User Manual - Page 12
    adjustable with the VOLUME +/- buttons on the remote control, in synchronization with the volume of the projector. (&20) Even when the sound of projector is set to mute mode by the away from the speaker. • This projector doesn't support plug-in power for the microphone. 12 (continued on next page)
  • Hitachi CP-AW250N | User Manual - Page 13
    your devices (continued) To use network functions of the projector, connect the LAN port with the computer's LAN port port of the external device to communicate as a network terminal. See the User's Manual - Network Guide for details of the network functions. Access point Computer LAN RS-232C USB
  • Hitachi CP-AW250N | User Manual - Page 14
    chain or wire up to 10 mm in diameter can be attached to the security bar on the projector. Also this product has the security slot for the Kensington lock. For details, see the manual of the security tool. Anti-theft chain or wire Security slot Security bar WARNING ►Do not use
  • Hitachi CP-AW250N | User Manual - Page 15
    parts as shown in figure, and assemble the cable cover. 3 3 1 1 2 2 3. Insert the three knobs on the cable cover into the three holes on the projector as shown in the figure. Pass the cables through the holes on the bottom of the cable cover. 1 knobs 1 3 2 2 3 CAUTION ► Be careful not
  • Hitachi CP-AW250N | User Manual - Page 16
    hook part of the battery cover, remove it. 1 2 3 2. Align and insert the two AA batteries (HITACHI MAXELL, Part No.LR6 or R6P) according to their plus and minus terminals as indicated in the remote control. 3. Replace the battery cover in the direction of the arrow and snap it back into place
  • Hitachi CP-AW250N | User Manual - Page 17
    FOCUS + - D-ZOOM + (1) (1) Set to Mode 1:NORMAL... VOLUME - and RESET buttons POSITION MENU (2) Set to Mode 2:HIGH... MAGNIFY OFF and ESC buttons ENTER Please remember that the REMOTE FREQ. in the SERVICE item of ESC RESET the OPTION menu (60) of the projector and mouse drivers. This
  • Hitachi CP-AW250N | User Manual - Page 18
    a trouble on your eyes. ►Be careful not to pinch your finger with the lens door, to prevent an injury. ►Do not place the projector vertically with the lens door open as shown in the figure on the right. It could cause malfunction or injury. ►Do not stand under the projector mounted on the wall or
  • Hitachi CP-AW250N | User Manual - Page 19
    the power 1. Press the STANDBY/ON button on the projector or the remote control. The message "Power off?" will appear on not turn the projector off shortly after turning it on. Such operations might cause the lamp to malfunction or shorten the lifetime of some parts including the lamp. WARNING ►Be
  • Hitachi CP-AW250N | User Manual - Page 20
    the volume of AUDIO menu adjustment is - FOCUS + (45).POSITION - D-ZOOM + MENU ● Even if the projector is in the standby mode, the volume is remote control, in synchronization with the volume of the projector (12). Temporarily muting the sound MUTE button 1. Press MUTE button on the remote
  • Hitachi CP-AW250N | User Manual - Page 21
    the images from the DOWN OFF ー KEYSTONE MY BUTTON MUTE 1 2 - FOCUS + POSITION - D-ZOOM + MENU ESC ENTER RESET USB TYPE B port. 1. Press VIDEO button on the remote control. Each time you press the button, the projector switches its input port from the current port as below. HDMI
  • Hitachi CP-AW250N | User Manual - Page 22
    1. Press ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in MAGNIFY FREEZE ON PAGE UP VOLUME ＋ DOWN OFF ー KEYSTONE MY BUTTON MUTE 1 2 - FOCUS + POSITION - D-ZOOM + MENU ENTER ESC RESET  F or a video signal,
  • Hitachi CP-AW250N | User Manual - Page 23
    projector is in a condition to be able to just project. If necessary, detach the spacer, and the elevator feet can be manually place of the projector, it will recommend keep and reuse the spacers. Adjusting the zoom and focus Press the D-ZOOM + or D-ZOOM - button on the remote control to display
  • Hitachi CP-AW250N | User Manual - Page 24
    the FOCUS + or FOCUS - button on the remote control, or FOCUS + or FOCUS - button on the projector (5) while no menu is on screen, to display the FOCUS box on screen. Use the FOCUS + and FOCUS - buttons to adjust the screen focus. After the focus adjustment, wait for a while until the FOCUS box
  • Hitachi CP-AW250N | User Manual - Page 25
    the POSITION button on the remote control while no menu is on screen, to display the D-SHIFT (42) dialog on screen. VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY FREEZE ON PAGE UP VOLUME ＋ Operating DOWN OFF ー KEYSTONE MY BUTTON MUTE 1 2 - FOCUS + POSITION - D-ZOOM + MENU
  • Hitachi CP-AW250N | User Manual - Page 26
    magnification of the projector switches in order with every press of the MAGNIFY button. KEYSTONE MY BUTTON MUTE 1 2 - FOCUS + - area. 4. Press the MAGNIFY OFF button on the remote control to exit magnification. ● The MAGNIFY dialog will not supported is input. - There is no input signal. 26
  • Hitachi CP-AW250N | User Manual - Page 27
    time, the LCD panel might possibly be burned in. Do not leave the projector in the FREEZE mode for too long. ● Images might appear degraded when this function is operated, but it is not a malfunction. Temporarily blanking the screen 1. Press BLANK button on the remote control. BLANK button
  • Hitachi CP-AW250N | User Manual - Page 28
    menus is operated using the same methods. While the projector DOWN is displaying any menu, the MENU button on ＋ DOWN OFF ー KEYSTONE MY BUTTON MUTE 1 2 - FOCUS + POSITION - D-ZOOM + MENU ESC ENTER RESET ESC button instructed in the OSD to operate the item. (continued on next page) 28
  • Hitachi CP-AW250N | User Manual - Page 29
    ● When you want to reset the operation, press RESET button on the remote control during the operation. Note that some items (ex. LANGUAGE, VOLUME) previous display, press the ◄ cursor button or ESC button on the remote control. Indication in OSD (On Screen Display) The meanings of the general
  • Hitachi CP-AW250N | User Manual - Page 30
    EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item ASPECT D-ZOOM KEYSTONE KEYSTONE PERFECT FIT Description Using the ◄/► buttons switches the mode for aspect
  • Hitachi CP-AW250N | User Manual - Page 31
    the ◄/► buttons switches the mode for mirror status. See the MIRROR item in SETUP menu (44). RESET FILTER TIME Performing this item resets all of the EASY MENU items except the FILTER TIME and LANGUAGE. A dialog is displayed for confirmation. Selecting the OK using the ► button performs resetting
  • Hitachi CP-AW250N | User Manual - Page 32
    PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item BRIGHTNESS CONTRAST Description
  • Hitachi CP-AW250N | User Manual - Page 33
    . (1) HDMI FORMAT item in the INPUT menu is set to VIDEO. (2) HDMI FORMAT item in the INPUT menu is set to AUTO, and the projector recognizes that it receives video signals. TINT Using the ◄/► buttons adjusts the tint. Reddish ó Greenish • This item can be selected only for a video, s-video
  • Hitachi CP-AW250N | User Manual - Page 34
    The active iris is always open. • The screen may flicker when the PRESENTATION or THEATER modes are selected. If this occurs select OFF. This projector has 4 memories for adjustment data (for all the items of the PICTURE menu). Selecting a function using the ▲/▼ buttons and pressing the ► or ENTER
  • Hitachi CP-AW250N | User Manual - Page 35
    (2) applies. (1) HDMI FORMAT item in the INPUT menu is set to VIDEO. (2) H DMI FORMAT item in the INPUT menu is set to AUTO, and the projector recognizes that it receives video signals. (continued on next page) 35
  • Hitachi CP-AW250N | User Manual - Page 36
    IMAGE menu Item V POSITION H POSITION Description Using the ◄/► buttons adjusts the vertical position. Down ó Up • Over-adjusting the vertical position may cause noise to appear on the screen. If this occurs, please reset the vertical position to the default setting. Pressing the RESET button when
  • Hitachi CP-AW250N | User Manual - Page 37
    is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment by pressing the RESET button on the remote control during this operation. • Images might appear degraded when this function is operated, but it is not a malfunction. Selecting this item performs the
  • Hitachi CP-AW250N | User Manual - Page 38
    INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description Using the ▲/▼ buttons
  • Hitachi CP-AW250N | User Manual - Page 39
    INPUT menu Item VIDEO FORMAT Description The video format for S-VIDEO port and VIDEO port can be set. (1) Use the ▲/▼ buttons to select the input port. (2) Using the ◄/► buttons switches the mode for video format. AUTO ó NTSC ó PAL ó SECAM N-PAL ó M-PAL ó NTSC4.43 • This item is performed only
  • Hitachi CP-AW250N | User Manual - Page 40
    SYNC ON G OFF • Selecting the AUTO mode allows you to input a sync on G signal or component video signal from the port. Please refer to "Technical" for the connection of component video input to COMPUTER IN1/2 port. • In the AUTO mode, the picture may be distorted with certain input signals. In
  • Hitachi CP-AW250N | User Manual - Page 41
    COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ and vertical (VERT) resolutions using CUSTOM ↓ the buttons. This function may not support all resolutions. (5) Move the cursor to OK on screen and press the
  • Hitachi CP-AW250N | User Manual - Page 42
    SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item D-ZOOM D-SHIFT PICT. POSIT. H KEYSTONE
  • Hitachi CP-AW250N | User Manual - Page 43
    Transition Detector is on (74). Using the ▲/▼ buttons turns on/off the AUTO ECO MODE. ON ó OFF AUTO ECO MODE • When ON is selected, the projector will always be set to Eco mode at start-up regardless of the ECO MODE (44) setting. An OSD message "AUTO ECO MODE" will be
  • Hitachi CP-AW250N | User Manual - Page 44
    NORMAL ó ECO • When the ECO is selected, acoustic noise and screen brightness are reduced. • When AUTO ECO MODE (43) is set to ON, the projector will always be set to Eco mode at start-up regardless this setting. Using the ▲/▼ buttons switches the mode for mirror status. MIRROR NORMAL ó H:INVERT
  • Hitachi CP-AW250N | User Manual - Page 45
    projected, the audio signal from the input port selected in step (2) is output to both the AUDIO OUT port and built-in speaker of this projector. However, the built-in speaker does not work when SPEAKER is set to OFF. (1) C hoose a picture input port using the ▲/▼ buttons. Choose STANDBY to select
  • Hitachi CP-AW250N | User Manual - Page 46
    AUDIO menu Item HDMI AUDIO MIC LEVEL MIC VOLUME Description Using the ▲/▼ buttons switches the mode for the HDMI audio. Check each of the two modes provided and select the suitable one for your HDMI audio device. 1 ó 2 Using the ▲/▼ buttons switches the input level to match that of the microphone
  • Hitachi CP-AW250N | User Manual - Page 47
    or INPUT button to save the language setting. Using the buttons adjusts the menu position. To quit the operation, press the MENU button on the remote control or keep no operation for about 10 seconds. Using the ▲/▼ buttons switches the mode for the blank screen. The blank screen is a screen for
  • Hitachi CP-AW250N | User Manual - Page 48
    for capturing will appear. To stop performing, press the RESET button on the remote control. 2. Using the buttons adjusts the frame position. Please move the frame to the previous dialog, press the RESET button on the remote control. Registration may take several minutes. When the registration
  • Hitachi CP-AW250N | User Manual - Page 49
    FREEZE" and "II" while freezing the screen by pressing the FREEZE button. The indication of the TEMPLATE displayed by changing. The indication of "+++ FOCUS +++" displayed by changing The D-ZOOM dialog displayed by changing • When the OFF is selected, please remember if the picture is frozen. Do not
  • Hitachi CP-AW250N | User Manual - Page 50
    SCREEN menu Item SOURCE NAME Description Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button. The SOURCE
  • Hitachi CP-AW250N | User Manual - Page 51
    scroll it horizontally when MAP1 or MAP2 is selected. To invert or scroll the map, display the guidance by pressing the RESET button on the remote three seconds or more when MAP1 or MAP2 appears. (continued on next page) 51
  • Hitachi CP-AW250N | User Manual - Page 52
    required to have NTSC format video or 480i@60 format component video source supporting C.C. feature to utilize this function. It may not work properly, depending is for additional information such as news reports or a TV program guide. The information covers the entire screen. Not all of the C.C.
  • Hitachi CP-AW250N | User Manual - Page 53
    or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table. Item is started from the current port. Then when an input is found, the projector will stop searching and display the image. COMPUTER IN1  COMPUTER IN2  LAN
  • Hitachi CP-AW250N | User Manual - Page 54
    turn the projector off. Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) AUTO POWER OFF When the time is set to 0, the projector is not reaches at the set time, the projector lamp will be turned off. If one of the projector's buttons or the remote control buttons is pressed or one of
  • Hitachi CP-AW250N | User Manual - Page 55
    about the lamp. • For the lamp replacement, see the section "Replacing the lamp" (89). The filter time is the usage time of the air filter, counted after the last resetting. It is shown in the OPTION menu. Pressing the RESET button on the remote control or the ► button of the projector displays
  • Hitachi CP-AW250N | User Manual - Page 56
    is to assign one of the following functions to MY BUTTON 1/2 on the remote control (6). (1)Use the ▲/▼ buttons on the MY BUTTON menu to select a text displayed on the screen on/off (Messenger Function in the User's Manual - Network Guide). When there is no transferred text data to display, the
  • Hitachi CP-AW250N | User Manual - Page 57
    Changes the PICTURE MODE (31). • F ILTER RESET: Displays the filter time reset confirmation dialogue (55). • TEMPLATE: Makes the template pattern to be selected with pressing the MY SOURCE/DOC.CAMERA button on the remote control. You can use this function not only for document cameras but also
  • Hitachi CP-AW250N | User Manual - Page 58
    on the remote control to execute the item. FAN SPEED Using the ▲/▼ buttons switches the rotation speed of the cooling fans. If the projector is buttons to disappear ghost. FILTER MESSAGE Use the ▲/▼ button to set the timer for notifying by the message when to replace the filter unit 500h ó 1000h
  • Hitachi CP-AW250N | User Manual - Page 59
    lock function on/off. When ON is selected, all buttons on the projector or remote control except the STANDBY/ON button are locked. • Please use this function Note that the lamp will be turned off when the lens door is closed. Press the STANDBY/ON button on the projector or the remote control to open
  • Hitachi CP-AW250N | User Manual - Page 60
    button to change the projector's remote sensor on or off. ON ó OFF The factory default setting is for both 1:NORMAL and 2:HIGH to be on. If the remote control does not function correctly the function of serial communication, refer to the User's Manual - Network Guide. (continued on next page) 60
  • Hitachi CP-AW250N | User Manual - Page 61
    it is required to control an external device as a network terminal, via this projector from the computer. The CONTROL port doesn't accept RS-232C commands (Network Bridge Function in the User's Manual - Network Guide) OFF: Select this mode to receive RS-232C commands using the CONTROL port. • OFF
  • Hitachi CP-AW250N | User Manual - Page 62
    through the CONTROL port. OFF ó 1s ó 2s ó 3s SERVICE (continued) OFF: Select this mode if it is not required to check the responses from the device that the projector COMMUNICATION (continued) sends data to. In this mode, the projector can send out data from the computer continuously. 1s /2s
  • Hitachi CP-AW250N | User Manual - Page 63
    a dialog titled "INPUT_INFORMATION". It shows the information about the current input. SERVICE (continued) • The "FRAME LOCK" message on the dialog means the setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE, FILTER MESSAGE, NETWORK and SECURITY settings are not reset. CANCEL  OK
  • Hitachi CP-AW250N | User Manual - Page 64
    ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. See the User's Manual - Network Guide for details of NETWORK operation
  • Hitachi CP-AW250N | User Manual - Page 65
    . Use the buttons to enter the Year (last two digits), Month, Date, Hour and Minute. • The projector will override this setting and retrieve DATE AND TIME information from the Time server when SNTP is enabled. ( Date/Time Settings in the User's Manual - Network Guide) (continued on next page) 65
  • Hitachi CP-AW250N | User Manual - Page 66
    ENTER or INPUT button, 1 character or all characters will be erased.The PROJECTOR NAME can be input up to 64 characters. (3) To change an already and press the ►, ENTER or INPUT button. To revert to the previous PROJECTOR NAME without saving changes, move the cursor to the CANCEL on screen and press
  • Hitachi CP-AW250N | User Manual - Page 67
    To store images in the projector, the application software PJImg/Projector Image Tool that can be downloaded from our website is required. Use the ▲/▼ buttons to select an item which is a still image by the MY IMAGE ( My Image Function in the User's manual - Network Guide) and the ► or ENTER button
  • Hitachi CP-AW250N | User Manual - Page 68
    a computer to the Presenter mode while its image is projected, the projector is occupied by the computer and access from any other computer is use "LiveViewer". For details, see the section Presenter mode in the User's Manual - Network Guide. MULTI PC MODE If you set one or more computers to the
  • Hitachi CP-AW250N | User Manual - Page 69
    details on how to switch the display mode to Multi PC mode on your computer, see the section Switching the display mode in the User's Manual - Network Guide. • The Presenter mode setting of the selected computer becomes valid when the display mode is changed to Single PC mode. Also, the Presenter
  • Hitachi CP-AW250N | User Manual - Page 70
    connection method in the User's manual - Network Guide. • Only the first 16 characters of the projector name are displayed. • projector has not gotten address from DHCP server. Executing this item restarts and initializes the network functions. Choose the RESTART EXECUTE using the button ►. SERVICE
  • Hitachi CP-AW250N | User Manual - Page 71
    projector. (2). The 10 digit Inquiring Code will be displayed. Contact your dealer with the 10 digit Inquiring Code. Your password will be sent after your user this time. Pressing the ENTER button on the remote control or ► button on the projector will close the NOTE NEW PASSWORD box. • Please do
  • Hitachi CP-AW250N | User Manual - Page 72
    of the password during this time. Pressing the ENTER button on the remote control or ► button on the projector will return to MyScreen PASSWORD on/off menu. When a password is set . Your password will be sent after your user registration information is confirmed. (continued on next page) 72
  • Hitachi CP-AW250N | User Manual - Page 73
    be displayed. • If there is no key input for about 5 minutes while the Inquiring Code is displayed, the projector will turn off. 3-2 Contact your dealer with the 10 digit Inquiring Code. Your PIN code will be sent after your user registration information is confirmed. (continued on next page) 73
  • Hitachi CP-AW250N | User Manual - Page 74
    projector will not display the input signal. • To display the signal again, set this function OFF. • After about 5 minutes of displaying the TRANSITION DETECTOR ON alarm, the lamp remote control or the ► button on the projector user registration information is confirmed. (continued on next page) 74
  • Hitachi CP-AW250N | User Manual - Page 75
    make note of the password during this time. Pressing the ENTER button on the remote control or ► button on the projector will return to the MY TEXT PASSWORD on/off menu. 2 Turning off Your password will be sent after your user registration information is confirmed. (continued on next page) 75
  • Hitachi CP-AW250N | User Manual - Page 76
    When it is set ON, the MY TEXT will be displayed on the START UP screen and the INPUT_ INFORMATION when the INFORMATION on the SERVICE menu is chosen. • This function is available only when the MY TEXT PASSWORD function is set to the OFF. MY TEXT WRITING (1) U se the ▲/▼ buttons
  • Hitachi CP-AW250N | User Manual - Page 77
    Presentation tools Presentation tools The projector has the following two convenient tools devices with security software may not work. • Be careful when inserting or removing a USB device. (12, 80) [Supported format] • FAT12, FAT16 and FAT32 NOTE • NTFS is not supported. [Supported file format]
  • Hitachi CP-AW250N | User Manual - Page 78
    Presentation tools PC-LESS Presentation (continued) Thumbnail mode The Thumbnail mode displays the images stored in a USB storage device on the Thumbnail screen. Maximum 20 images are displayed in a screen. If you wish, you can jump into the Full Screen mode or Slideshow mode, after you select some
  • Hitachi CP-AW250N | User Manual - Page 79
    control or keypad or a web browser software. The following functions can be supported while the Thumbnail is displayed. The remote control PAGE UP PAGE DOWN Button operation The keypad on Web Remote in web the projector browser software. - PAGE UP PAGE DOWN ENTER INPUT ENTER
  • Hitachi CP-AW250N | User Manual - Page 80
    Slideshow. Selects the Slideshow mode. Switches the input port. Displays the menu. Be sure to use this function before removing USB storage device from the projector. After that, the projector will not recognize a USB storage device until you insert it again into the USB TYPE A input port. 80
  • Hitachi CP-AW250N | User Manual - Page 81
    continued) Presentation tools NOTE • These operations are not accessible while the projector OSD is displayed. • The Thumbnail mode shows 20 pictures in the Thumbnail. This file seems to be broken or not supported format. A file that cannot be displayed on the thumbnail screen is indicated by a file
  • Hitachi CP-AW250N | User Manual - Page 82
    the keypad, or click [ENTER] on the Web Remote Control. Full screen display The following functions can be supported in the Full Screen mode. Button operation The remote control The keypad on the projector Web Remote in web browser software. ▼ ► or PAGE DOWN ▼ or ► ▼ ► or PAGE DOWN ▲ ◄ or
  • Hitachi CP-AW250N | User Manual - Page 83
    can be accessible while the Slideshow is displayed. The remote control ENTER Button operation The keypad on the projector Web Remote in web browser software. INPUT ENTER Functions Displays thumbnail * These operations are not accessible while the projector OSD is displayed. NOTE • It is not
  • Hitachi CP-AW250N | User Manual - Page 84
    4) STOP : Set the end number of the Slideshow. 5) INTERVAL : Set the interval time of the Slideshow. It is not recommend to set the interval time very short something like several seconds, because it may take more than several seconds to read and display an image file if it is stored in very
  • Hitachi CP-AW250N | User Manual - Page 85
    Presentation tools PC-LESS Presentation (continued) Playlist The Playlist is a DOS format text file, which decides the order of displayed still image files in the Thumbnail or Slideshow. The playlist file name is "playlist.txt" and it can be edited on a computer. It is created in the folder that
  • Hitachi CP-AW250N | User Manual - Page 86
    version at Hitachi Web site. http://www.hitachi-america.us/digitalmedia or http://www.hitachidigitalmedia.com Follow the instructions that can refer to the User's Manual - Network Guide) and this application cannot be used at the same time. If you connect your computer to the projector by using a
  • Hitachi CP-AW250N | User Manual - Page 87
    the button is clicked is remained on the screen. You can revise the image data on your computer without showing it on the projector's screen.  Option button The Options window is displayed.  Minimize button The Floating menu is closed, and the icon reappears in the Windows notification
  • Hitachi CP-AW250N | User Manual - Page 88
    for USB" captures screenshots in JPEG data and sends them to the projector. The "LiveViewer Lite for USB" has two options that have different and the display speed may be faster. CP-AW250N, CP-AW250NM: 1280 x 800 If your computer does not support the display resolution specified above, a smaller
  • Hitachi CP-AW250N | User Manual - Page 89
    dealer and tell the lamp type number. Type number : DT01181 lamp cover Replacing the lamp 1. Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes. 2. Prepare a new lamp. If the projector is mounted on a ceiling, or if the lamp has broken, also ask
  • Hitachi CP-AW250N | User Manual - Page 90
    Do not open the lamp cover while the projector is mounted on a wall or ceiling. This is dangerous, since if the lamp's bulb has broken, the shards will fall out when the cover is opened. In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the
  • Hitachi CP-AW250N | User Manual - Page 91
    dealer and tell the following type number. Type number : UX37191 (Filter set) When you replace the lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. 1. Turn the projector off, and unplug the power cord. Allow the
  • Hitachi CP-AW250N | User Manual - Page 92
    heavily soiled. • When you replace the projection lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. • Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about
  • Hitachi CP-AW250N | User Manual - Page 93
    replacement of the battery: HITACHI MAXELL, part number CR2032 or CR2032H. 1.  Turn the projector off, and unplug the power cord. Allow the projector by removing the battery. For setting the clock, see the User's Manual - Network Guide. WARNING ►Be careful of handling a battery, as a battery
  • Hitachi CP-AW250N | User Manual - Page 94
    is closed manually, it may not shut properly. • The lens door may not close when the LENS DOOR LOCK function of the SERVICE item SERVICE item in the OPTION menu (&59). WARNING ►Before caring for the projection mirror and lens, turn the projector off and unplug the power cord, then cool the projector
  • Hitachi CP-AW250N | User Manual - Page 95
    by your dealer about once every year. Caring for the cabinet and remote control Incorrect care could have adverse influence such as discoloration, peeling paint, etc. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the
  • Hitachi CP-AW250N | User Manual - Page 96
    to your dealer or service company. Otherwise if a problem occurs with the projector, the following checks User's Manual - Network Guide) The horizontal or vertical frequency of the input signal is not within the specified range. Please confirm the specs for your projector or the signal source specs
  • Hitachi CP-AW250N | User Manual - Page 97
    the projector is used at an altitude of about 1600m or higher, set FAN SPEED of the SERVICE item in the OPTION menu to HIGH (58). A note of precaution when cleaning the air filter. Please immediately turn the power off, and clean or change the air filter referring to the "Cleaning and replacing the
  • Hitachi CP-AW250N | User Manual - Page 98
    Troubleshooting Regarding the indicator lamps When operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER LAMP TEMP indicator indicator indicator Description Lighting Turned Turned The projector is in a standby state.
  • Hitachi CP-AW250N | User Manual - Page 99
    1 Power ON schedule is saved to the projector. Please refer to Schedule Settings section of User's Manual - Network Guide. NOTE • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such
  • Hitachi CP-AW250N | User Manual - Page 100
    Troubleshooting Resetting all settings When it is hard to correct some wrong settings, the FACTORY RESET function of SERVICE item in OPTION menu (63) can reset all settings (except settings such as LANGUAGE, LAMP TIME, FILTER TIME, FILTER MESSAGE, SECURITY and NETWORK) to the factory default.
  • Hitachi CP-AW250N | User Manual - Page 101
    Troubleshooting play monitor. The BLANK screen is displayed. Press BLANK button on the remote control. The USB TYPE B port is selected as the picture input to the port. Otherwise select other port for picture input. The projector does not recognize the USB storage device inserted into USB TYPE A port
  • Hitachi CP-AW250N | User Manual - Page 102
    Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) The projector is operating in Eco mode. Set ECO MODE to NORMAL, and set AUTO ECO MODE to OFF, in the SETUP menu. The lamp is approaching the end of its product lifetime. Replace the lamp. Either the focus and/
  • Hitachi CP-AW250N | User Manual - Page 103
    Troubleshooting TYPE item in the 61 OPTION - SERVICE - COMMUNICATION menu. Network does The SAVING loop may have an adverse effect on the projector as well as the other network devices. Check which the Please refer to the Microsoft® Help and Support home - "LiveViewer" was page on how to
  • Hitachi CP-AW250N | User Manual - Page 104
    Specifications Specifications Please see the Specifications in the User's Manual (concise) which is a book. End User License Agreement for the Projector Software • Software in the projector consists of the plural number of independent software modules and there exist our copyright or/and third party
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
1
Projector
CP-AW250N
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this
product. Be sure to read “
Safety Guide
” first. After reading them, store them in a
safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
• Mac
®
is a registered trademark of Apple Inc.
• Windows
®
, DirectDraw
®
and Direct3D
®
are registered trademarks of Microsoft Corporation
in the U.S. and/or other countries.
• VESA and DDC are trademarks of the Video Electronics Standard Association.
•
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
• Trademark PJLink is a trademark applied for trademark rights
in Japan, the United States of America and other countries and
areas.
• Blu-ray Disc
TM
and Blu-ray
TM
are trademarks of Blu-ray Disc Association.
All other trademarks are the properties of their respective owners.
NOTICE
This entry notices of fear of causing trouble.
(Type nos. CP-AW250N, CP-AW250NM)