Hitachi CP-SX635 Network Guide
Hitachi CP-SX635 - SXGA+ LCD Projector Manual
 |
UPC - 050585151529
View all Hitachi CP-SX635 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi CP-SX635 manual content summary:
- Hitachi CP-SX635 | Network Guide - Page 1
Projector CP-SX635 User's Manual (detailed) Network Guide Thank you for purchasing this projector. This projector has the network function that brings you the following main features. ü W eb control The projector can be controlled and monitored by a web browser software on your PC, which can help - Hitachi CP-SX635 | Network Guide - Page 2
Required equipment preparation 4 2.2 Manual network connection setting 5 2.2.1 Equipments connection 5 2.2.2 Network settings 5 2.2.3 "Internet Option" setting 8 2.2.4 Check connection 9 3. Management with Web browser software 10 3.1 Configuring and controlling the projector via a web browser - Hitachi CP-SX635 | Network Guide - Page 3
and controlling via a web browser You can adjust or control the projector via a network from a web browser on a PC that is the web browser and it offers the menus to configure the network settings, monitor the projector and so on. 1.2 MY IMAGE (Still image Transfer) Display Image files can be - Hitachi CP-SX635 | Network Guide - Page 4
connection and network setting 2.1 Required equipment preparation The following equipments are required to connect the projector to your PC through the network. PC : 1) equipped with the network feature 2) installed a web browser software (&11) LAN cable : CAT-5 or greater NOTE • The system for - Hitachi CP-SX635 | Network Guide - Page 5
2. Equipment connection and network setting 2.2 Manual network connection setting 2.2.1 Equipments connection Connect the projector and PC with a LAN cable. * Before connecting with an existing network, contact the network administrator. Next, please check the PC setting as explained below. 2.2.2 - Hitachi CP-SX635 | Network Guide - Page 6
and network setting 2.2 Manual network connection setting (continued) 5) Open "Local Area Connection Properties" window you use for network device. (Fig. 2.2.2.c) Fig. 2.2.2.c "Local Area Connection Properties" window 6) Set used protocol as "TCP/IP" and open "Internet Protocol (TCP/IP) Properties - Hitachi CP-SX635 | Network Guide - Page 7
Manual network connection setting (continued) [About IP address] ■ Setting manually The Network address portion included in the IP address set into your PC should be common with projector to the projector and PC automatically. * DHCP is abbreviation for "Dynamic Host Configuration Protocol" and has - Hitachi CP-SX635 | Network Guide - Page 8
2. Equipment connection and network setting 2.2 Manual network connection setting (continued) 2.2.3 "Internet Option" setting 1) Click "Internet Options" in "Network and Internet Connections" window (Fig. 2.2.3.a) to open "Internet Properties" window. (Fig.2.2.3.b) Click Fig. 2.2.3.a " - Hitachi CP-SX635 | Network Guide - Page 9
connection and network setting 2.2 Manual network connection setting (continued) Fig. 2.2.3.c "Local Area Network (LAN) Settings" window 3) Uncheck all boxes in "Local Area Network (LAN) Settings" window. (Fig. 2.2.3.c) 2.2.4 Check connection Check PC and projector are connected properly here. If - Hitachi CP-SX635 | Network Guide - Page 10
can automatically send an alert to specified e-mail addresses when the projector requires maintenance or has encountered an error. (32) Projector Management using SNMP This projector is SNMP (Simple Network Management Protocol) compliant, allowing you to monitor it from a remote location using SNMP - Hitachi CP-SX635 | Network Guide - Page 11
. You can't communicate the projector using SSL on Windows Vista. • It is recommended that all web browser updates are installed. It is especially recommended that all users running Internet Explorer on a Microsoft Windows version prior to Windows XP Service Pack 2 install security update Q832894 - Hitachi CP-SX635 | Network Guide - Page 12
required. There are two types of IDs, Administrator ID and User ID. The following chart describes the differences between Administrator and User IDs. Item Description Network Information Displays the projector's current network configuration settings. Network Settings Displays and configures - Hitachi CP-SX635 | Network Guide - Page 13
the following for configuring or controlling the projector via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: Fig. 3.1.1 b "Logon with Administrator ID" Fig. 3.1.1 c "Logon with User ID" 3) Click the desired operation or configuration item on the main menu - Hitachi CP-SX635 | Network Guide - Page 14
All screen drawings in this manual are shown when you logon with the Administrator ID. Any functions that are available only for the Administrator will not be shown when you logon with the User ID. Refer to the table. (12,13) Displays the projector's current network configuration settings. Item - Hitachi CP-SX635 | Network Guide - Page 15
Configures the subnet mask when DHCP is disabled. Configures the default gateway when DHCP is disabled. Configures the name of the projector. The length of the Projector Name can be up to 64 alphanumeric characters. Only alphabets, numbers and following symbols can be used and space Configures the - Hitachi CP-SX635 | Network Guide - Page 16
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.4 Port Settings Displays and configures communication port settings. Item Description Network Control Port1 (Port:23) Configures command control port 1 (Port:23). - Hitachi CP-SX635 | Network Guide - Page 17
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.5 Mail Settings Displays and [Send Test Mail]. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. 17 - Hitachi CP-SX635 | Network Guide - Page 18
Alarm. (OPTION Menu in the User's Manual (detailed) - Operating Guide) The Power switch is turned on. (Off → standby mode) The SNMP access is detected from the invalid SNMP community. Refer to "Troubleshooting" in the User's Manual (detailed) - Operating Guide for further detailed explanation of - Hitachi CP-SX635 | Network Guide - Page 19
on the projector screen. The e-mail will be sent when the filter timer exceeds 500, 1000, 1500 or 2000 hours based on the configuration. No notification e-mail will be sent if the FILTER MESSAGE is set to TURN OFF. (OPTION Menu in the User's Manual (detailed) - Operating Guide) • Lamp Time Alarm - Hitachi CP-SX635 | Network Guide - Page 20
and controlling the projector via a web browser (continued) 3.1.7 Schedule Settings Displays and configures schedule settings. Item Daily Sunday Monday Tuesday Wednesday Thursday Friday Saturday Specific date No.1 Specific date No.2 Specific date No.3 Specific date No.4 Specific date No - Hitachi CP-SX635 | Network Guide - Page 21
Configuring and controlling the projector via a web browser (continued) The schedule settings are shown below. Item Schedule Date (Month/Day) Description Click [Enable] check box to enable the schedule. Configures the month and date. This item appears only when Specific date (No. 1-5) is selected - Hitachi CP-SX635 | Network Guide - Page 22
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.8 Date/Time Settings Displays and configures the date and time settings. Item Current Date Current Time Daylight Savings Time Start Month - Hitachi CP-SX635 | Network Guide - Page 23
existing network, consult a network administrator before setting server addresses. • To enable the SNTP function, the time difference must be set. • The projector will retrieve Date and Time information from the time server and override time settings when SNTP is enabled. • The internal clock's time - Hitachi CP-SX635 | Network Guide - Page 24
and controlling the projector via a web browser (continued) 3.1.9 Security Settings Displays and configures passwords and other security settings. Item Administrator authority Administrator ID Administrator Password Re-enter Administrator Password User authority User ID User Password Re-enter - Hitachi CP-SX635 | Network Guide - Page 25
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) Item Network Control Authentication Password Re-enter Authentication Password SNMP Community name Description Configures the Authentication password for the command control. - Hitachi CP-SX635 | Network Guide - Page 26
• The setting value may not match with the actual value if the user changes the value manually. In that case, please refresh the page by clicking [Refresh] button. Controls the projector. Item Main Power Input Source Picture Mode Blank On/Off Mute Freeze Magnify Template MY Image MY Image Delete - Hitachi CP-SX635 | Network Guide - Page 27
projector via a web browser (continued) Item Image Aspect Over Scan V Position H Position H Phase H Size Auto Adjust Execute Input Progressive Video NR 3D-YCS Color Space Component C-Video Format S-Video keystone distortion setting. Selects the whisper mode. Selects the mirror status. Assigns the - Hitachi CP-SX635 | Network Guide - Page 28
projector via a web browser (continued) Item Audio Volume Treble Bass Speaker Audio-RGB1 Audio-RGB2 Audio-HDMI Audio-Component Audio-S-Video Audio-Video port. Assigns the AUDIO-S-VIDEO input port. Assigns the AUDIO-VIDEO input port. Assigns the AUDIO OUT in the standby mode. Selects the HDMI audio - Hitachi CP-SX635 | Network Guide - Page 29
auto on function on/off. Auto off Configures the timer to shut off the projector when no signal is detected. My Button-1 Assigns the functions for the MY Display Selects Closed Caption DISPLAY setting. Mode Selects Closed Caption MODE setting. Channel Selects Closed Caption CHANNEL setting - Hitachi CP-SX635 | Network Guide - Page 30
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.11 Projector Status Displays the current projector status. Item Error Status Lamp Time Filter Time Power Status Input Status Blank On/Off Mute Freeze Description Displays the - Hitachi CP-SX635 | Network Guide - Page 31
in order to activate new configuration settings. NOTE • Restarting requires you to re-log on in order to further control or configure the projector via a web browser. Wait 1 minute or more after clicking [Restart] button to log on again. • The Logon menu (13) is displayed after restarting - Hitachi CP-SX635 | Network Guide - Page 32
's e-mail alert function, please configure the following items through a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter the Administrator ID and password - Hitachi CP-SX635 | Network Guide - Page 33
] button to save the settings. Failure/Warning e-mails are formatted as follows: Subject line : Text : Date Time IP Address MAC Address - Hitachi CP-SX635 | Network Guide - Page 34
SNMP The SNMP (Simple Network Management Protocol) enables to manage the projector information, which is a failure or administrator. • SNMP management software must be installed on the computer to monitor the projector via SNMP. SNMP Settings (16) Configure the following items via a web browser to - Hitachi CP-SX635 | Network Guide - Page 35
including power on / power off. It enables to be "self-management" projector. NOTE • You can schedule the following control events: Power ON/OFF one event has been scheduled for the same date and time (e.g., 'Specific date No. 1' has priority over 'Specific date No. 2' and so on. • Be sure to set the - Hitachi CP-SX635 | Network Guide - Page 36
be configured from a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into day of the week. 3) Specific date: Perform the specified operation on the specified date and time. NOTE • In Standby mode the power indicator will flash green - Hitachi CP-SX635 | Network Guide - Page 37
can be adjusted via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into and time have been set correctly. Replace the battery by following "Internal clock battery" section of the User's Manual (concise). • The internal clock's - Hitachi CP-SX635 | Network Guide - Page 38
to the manual for the application for instructions. To display the transferred image, select the MY IMAGE item in the NETWORK Menu. For more information, please see the description of the MY IMAGE item of the NETWORK Menu. ( NETWORK Menu in User's Manual (detailed) - Operating Guide) NOTE • It - Hitachi CP-SX635 | Network Guide - Page 39
Y IMAGE (Still Image Transfer) Display (continued) Configure the following items from a web browser when MY IMAGE is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter the Administrator ID and - Hitachi CP-SX635 | Network Guide - Page 40
function. Command Control Settings (16) Configure the following items from a web browser when command control is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter the Administrator ID and - Hitachi CP-SX635 | Network Guide - Page 41
3. Management with Web browser software 3.6 Command Control via the Network (continued) When the authentication setting is enabled, the following settings are required. (24) 7) Click [Security Settings] on the main menu. 8) Click [Network Control] and enter the desired authentication password. * - Hitachi CP-SX635 | Network Guide - Page 42
3. Management with Web browser software 3.6 Command Control via the Network (continued) Command Format Command formats differ among the different communication ports. ● TCP #23 You can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands. However - Hitachi CP-SX635 | Network Guide - Page 43
0x15 Connection ID 1 byte Connection ID 1 byte Reply 0x1C Error code 2 bytes Reply Data 0x1D 2 bytes Reply Status code 0x1F 2 bytes Reply 0x1F Authentication Error code 0x04 0x00 Connection ID 1 byte - Hitachi CP-SX635 | Network Guide - Page 44
a sample if the Authentication Password is set to "password" and the random 8 bytes are "a572f60c". 1) Select the projector. 2) Receive the random 8 bytes "a572f60c" from the projector. 3) Bind the random 8 bytes "a572f60c" and the Authentication Password "password" and it becomes "a572f60cpassword
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
 |
 |
1
Projector
CP-SX635
User's Manual (detailed)
Network Guide
Thank you for purchasing this projector.
This projector has the network function that brings you the following main features.
►Before using this product, be sure to read all manuals for this
product.
After reading them, store them in a safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
ü
Web control
The projector can be controlled and monitored by a web browser software on
your PC, which can help you to setup and maintain the projector.
ü
MY IMAGE (Still Image Transfer) Display
The projector can display still images that are transferred via the network.
This manual is only intended to explain Network function only.
For safety, operations or any other issues, refer to the Safety Guide and User’s
Manual (concise and detailed).
• Microsoft
®
and Internet Explorer
®
, Windows
®
, Windows Vista
®
are registered
trademark of Microsoft Corporation in the U.S. and/or other countries.
• JavaScript
®
is a registered trademark of Sun Microsystems, Inc.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
All other trademarks are the properties of their respective owners.