Hitachi CP-WX1100 User Manual
Hitachi CP-WX1100 Manual
 |
View all Hitachi CP-WX1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi CP-WX1100 manual content summary:
- Hitachi CP-WX1100 | User Manual - Page 1
Projector CP-X10000/CP-WX11000/CP-SX12000 User's Manual (detailed) - Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read the "User's Manual - Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store - Hitachi CP-WX1100 | User Manual - Page 2
Auto off, Sutter timer Lamp control signal 17 time, Filter time, My button, My source, Using the REMOTE ID function . . . . 18 Service Using as a wired remote control. . . . 18 NETWORK menu 56 Laser pointer 18 Setup, Projector name, My image, Operating 19 Information, Service Turning on 19 - Hitachi CP-WX1100 | User Manual - Page 3
is expected to prevent air dust from getting into the projector and offers you less maintenance frequency. Important safety instruction (for moving) *For details, see the & User's Manual (concise) or Safety Guide. WARNING ►Always move the projector with two or more people. Place your hands in the - Hitachi CP-WX1100 | User Manual - Page 4
Projector (2) Lens adapter (3) Hexagon wrench (for installation of (1) the optional lens unit) (4) Power cord (5) Computer cable (6) Remote control with two batteries (4) (7) User's manuals or more lens unit together with this product. • Some additional accessories or services may be - Hitachi CP-WX1100 | User Manual - Page 5
it is hot. ►Do not look into the lens or vents while the lamp is on, since the strong light is not good for your eyes. ►Do not grab the front cover or front ring to hold the projector, since you can drop the projector. ►Do not handle the elevator feet without holding the - Hitachi CP-WX1100 | User Manual - Page 6
(&22) The indicator (3) (7) LENS SHIFT button (&21) will light LAMP SECURITY SHUTTER Rear panel(&10) (1) HDMI port (2) DVI-D port (3) LAN port (4) MONITOR OUT port (5) CONTROL IN port (6) CONTROL OUT port (7) REMOTE CONTROL IN port (8) REMOTE projector is not turned off following the normal - Hitachi CP-WX1100 | User Manual - Page 7
SHUTTER MENU RESET PbyP AUTO POSITION MY BUTTON 1 3 MAGNIFY ON 2 4 OFF (24) (23) (25) (13) (14) (17) FOCUS + - ZOOM KEYSTONE + LENS SHIFT - (16) (10) (11) Back of the remote control (29) WARNING ►Do not look into the beam outlet or point the beam at people or pets while pressing - Hitachi CP-WX1100 | User Manual - Page 8
. ► Do not place the projector in a place where any strong lights hit the remote sensors. Projection style This projector can be used by the following projection, the specified mounting accessories (77) and service are required to install the projector. Request them from your dealer. Ask your - Hitachi CP-WX1100 | User Manual - Page 9
in the following table were calculated for the model CP-X10000 with the standard lens unit SD804 that is adjusted to the center position. See the user's manual of your lens unit for your case. The values differ for every combination of the projector and the lens unit. * The values shown in the table - Hitachi CP-WX1100 | User Manual - Page 10
exposing directly the remote sensor to any strong lights. Supplementary anti-theft means This projector has the security bar for a commercial anti-theft chain or wire up to 10 mm in diameter, and also the security slot for the Kensington lock. For details, see the manual - Hitachi CP-WX1100 | User Manual - Page 11
After making sure that the projector and the devices are turned off, perform the connection, according to the following instructions. Refer to the figures in manuals of devices. CAUTION ►Some connecting cable may have to have a specific length, or a ferrite core at the end to connect to the projector - Hitachi CP-WX1100 | User Manual - Page 12
-D RS-232C DVI-D LAN LAN Computer signal input RGB OUT RGB OUT RGB OUT RGB OUT RGB OUT RGB OUT LAN CAUTION LAN HDMI DVI-D REMOTE CONTROL IN CONTROL OUT CONTROL S-VIDEO MONITOR OUT HDMI CONTROL IN DVI-D CONTROL OUT REMOITNE CONTROL S-VIDEO MONITOR OUT IN OUT COMPUTER IN1 COMPUTER IN2 - Hitachi CP-WX1100 | User Manual - Page 13
your devices (continued) RGB OUT Example of connecting with another projector or a display device Control from the computer RS-232C Computer OFF 1 4 2 FOCUS + ZOOM + KEYSTONE LENS SHIFT - - Wired remote control LAN HDMI DVI-D REMOTE CONTROL IN CONTROL OUT CONTROL IN S-VIDEO MONITOR - Hitachi CP-WX1100 | User Manual - Page 14
projector, be sure to activate the PC's external RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the instruction manual as this projector is a Plug-and-Play monitor. NOTE for HDMI • The HDMI supports the following - Hitachi CP-WX1100 | User Manual - Page 15
the other end of the power cord into the power outlet. AC IN Socket of the power cord Power switch WARNING ►Do not connect the projector to a power supply when the lens unit is not attached. ►Use this projector from only the specified power supply in accordance with the label indication on the - Hitachi CP-WX1100 | User Manual - Page 16
control needs the two batteries of the following type. HITACHI MAXELL, part number LR6 or R6P The batteries that came with the product are a type suitable to this remote control. The following walks you through loading batteries into the remote control. 1. Remove the battery cover in the back of - Hitachi CP-WX1100 | User Manual - Page 17
RESET POSITION +FOCUS OFF ZOOM - + KEYSTONE - LENS SHIFT LASER Approx. 3 m NOTE • You can inactivate one or two sensors from the three sensors using the item REMOTE RECEIVE. of the SERVICE menu under the OPTION menu. • When you want to use two or more projectors of this type at the same - Hitachi CP-WX1100 | User Manual - Page 18
2 3 4 POSITION MOANGNIFY ON FOCUS OFF + ZOOM - + KEYSTONE - LENS SHIFT 2 R/Cr/Pr G/Y B/Cb/Pb H Y 4 V VIDEO 2 OFF This function is useful when a wireless remote signal I O Cb/Pb Cr/Pr may not reliably reach the projector. AC IN FOCUS ZOOM KEYSTONE + + NOTE • To connect the - Hitachi CP-WX1100 | User Manual - Page 19
►Do not look directly into the lens or the openings on the projector while the lamp is on. ►Do not approach the lamp cover and the exhaust vents, while the projection lamp is on. NOTICE ►Do not turn your device on prior to the projector, except for the cases directed by the manuals of devices. 19 - Hitachi CP-WX1100 | User Manual - Page 20
turn the projector off. 1. Press the STANDBY/ON button on the projector or the remote control. manual of each. NOTE • Use the shutdown switch only when the projector can be not turned off by normal procedure. WARNING ►Do not approach the lamp cover and the exhaust vents for a while after the lamp - Hitachi CP-WX1100 | User Manual - Page 21
to select "EXIT" on the dialog. It finishes the OSD menu. NOTE • The adjustable range of ZOOM and FOCUS varies depending on the lens unit mounted on the projector to maintain picture quality. Therefore ZOOM or FOCUS adjustments may not reach the end of the bar indicators in the dialog, and that - Hitachi CP-WX1100 | User Manual - Page 22
is selected, the projector will check HDMI port first. FOCUS FREE+ZE ZOOM + KEYSTONE MENU 1. Press the MY SOURCE button on the remote control. The input signal will be changed into the signal you set as MY SOURCE(49). ASPEC-T LENS SHIFT SHU-TTER - Hitachi CP-WX1100 | User Manual - Page 23
CP-WX11000) / FULL (fixed, CP-WX11000) VIDEO ID 1 ID 3 ● *16:10 / FULL: CP-WX11000 only. NATIVE: Except CP-X10000. SMALL: Except CP-WX11000. ● The NORMAL mode keeps the original aspect ratio of the signal. Using the automatic adjustment feature 1. Press the AUTO button on the remote RESET LENS - Hitachi CP-WX1100 | User Manual - Page 24
on the remote control MANUAL operation, and press the ► button to perform the following. FOCUS + - ZOOM KEYSTONE + LENS projector is placed on the level (about ±3°), this function may not work. ● When the vertical lens shift is not set fully upward (not set fully downward for the optional lens - Hitachi CP-WX1100 | User Manual - Page 25
area, press the POSITION button in the MAGNIFY mode, then us+e the+ LENS SHIFT cursor buttons to move the area. And to finalize the zo-om - screen to normal, press the OFF button of MAGNIFY on the remote control. ● The projector automatically exits from the MAGNIFY mode when the input signal is - Hitachi CP-WX1100 | User Manual - Page 26
Temporarily blanking the screen 1. Press the BLANK button on the remote control. The blank screen will be displayed instead of the or closing the lens shutter, the moving of the lens shutter is stopped+too. + However, when turning the projector on, the lens shutter closed or incompletely - Hitachi CP-WX1100 | User Manual - Page 27
(not in the PbyP mode). There are some operations available only in the PbyP mode.ENTER Starting the PbyP Press the PbyP button on the remote control, then the PbyP function will be started. To quit the PbyP mode, press the button FREEZE MENU ASPECT SHUTTER RESET PbyP AUTO POSITION normal - Hitachi CP-WX1100 | User Manual - Page 28
function LASER This projector has the following RESET buttons. The buttons of the same name on the remote control and on the prBLoANKjector funLAScERtion equally. STANDBY/ON ENTER ID 2 ID 4 BLANK LASER ENTER MENU button MENU LENS SHIFT RESET button COMPUTER Start / finish the menu ZOOM - Hitachi CP-WX1100 | User Manual - Page 29
From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control. Then perform it according to the following table. EASY MENU Item ASPECT AUTO KEYSTONE KEYSTONE KEYSTONE Description Using the ◄/► buttons switches - Hitachi CP-WX1100 | User Manual - Page 30
EASY MENU Item Description ECO MODE Using the ◄/► buttons turns off/on the eco mode. See the ECO MODE item in SETUP menu (41). MIRROR Using the ◄/► buttons switches the mode for mirror status. See the MIRROR item in SETUP menu (41). RESET Performing this item resets all of the EASY MENU - Hitachi CP-WX1100 | User Manual - Page 31
table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it according to the following table. PICTURE - Hitachi CP-WX1100 | User Manual - Page 32
PICTURE menu Item Description Using the ▲/▼ buttons switches the color temperature mode. 1 HIGH 1 CUSTOM 2 MID 2 CUSTOM 6 CUSTOM 3 LOW 6 Hi-BRIGHT-3 3 CUSTOM 5 CUSTOM5 Hi-BRIGHT-24 CUSTOM4 Hi-BRIGHT-1 To adjust CUSTOM COLOR TEMP Selecting a mode whose name includes CUSTOM and - Hitachi CP-WX1100 | User Manual - Page 33
to fixed brightness (0:dark 7:bright) • The screen may flicker when the PRESENTATION or THEATER modes are selected. If this occurs select MANUAL. This projector has 4 memories for adjustment data (for all the items of the PICTURE menu). Selecting a function using the ▲/▼ buttons and pressing the - Hitachi CP-WX1100 | User Manual - Page 34
projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control 4:3 (fixed, except CP-WX11000) / FULL (fixed, CP-WX11000) • *16:10 / FULL: CP-WX11000 only. NATIVE: Except CP-X10000. SMALL: Except CP-WX11000. • The NORMAL mode - Hitachi CP-WX1100 | User Manual - Page 35
. In such a case, please reset the adjustment by pressing the RESET button on the remote control during this operation. Selecting this item performs the automatic adjustment feature. For a computer FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (50). 35 - Hitachi CP-WX1100 | User Manual - Page 36
in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. Item - Hitachi CP-WX1100 | User Manual - Page 37
or SCART cable is required for a SCART RGB input to the projectLoANr. For details, contact your dealer. HDMI DVI-D CONTROL IN CONTROL OUT REMOTE CONTROL S-VIDEO MONITOR OUT IN COMPUTER IN1 COMPUTER IN2 OUT VIDEO 1 BNC R/Cr/Pr G/Y B/Cb/Pb H Y Cb/Pb Cr/Pr Video V VIDEO 2 G B R SCART - Hitachi CP-WX1100 | User Manual - Page 38
INPUT menu Item Description Set the digital range for HDMI port and DVI-D port. (1) Use the ▲/▼ buttons to select the input port. (2) Using the ◄/► cursor buttons changes the digital signal mode. AUTO ó NORMAL ó ENHANCED DIGITAL RANGE AUTO NORMAL ENHANCED Feature Selecting the optimum mode - Hitachi CP-WX1100 | User Manual - Page 39
IN1, COMPUTER IN2 and BNC input signals can be set on this projector. In the RESOLUTION menu select the resolution you wish to display using and vertical (VERT) resolutions using the buttons. This function is may not support all resolutions. (2) To save the setting place the cursor on the right- - Hitachi CP-WX1100 | User Manual - Page 40
on the projector or remote control, and press the ► cursor button on the projector or remote control, or the ENTER button on the remote control to execute . For some input, this function may not work well. • When the horizontal lens shift is not set to the center, this function may not work well. • - Hitachi CP-WX1100 | User Manual - Page 41
whenever possible. • When the vertical lens shift is not set fully upward (not set fully downward for the optional lens typeUSL-801 only (51), this status is changed, Transition Detector alarm (64) will be displayed when projector is restarted after the power switch is turned off. ・When V:INVERT - Hitachi CP-WX1100 | User Manual - Page 42
in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. Item - Hitachi CP-WX1100 | User Manual - Page 43
SCREEN menu Item Description Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó OFF START UP MyScreen ORIGINAL OFF Feature Screen can be registered by the MyScreen - Hitachi CP-WX1100 | User Manual - Page 44
image is displayed. The image will freeze and the frame for capturing will appear. To stop performing, press the RESET or COMPUTER button on the remote control. 2. Using the buttons adjusts the frame position. Please move the frame to the position of the image which you want to use. The frame - Hitachi CP-WX1100 | User Manual - Page 45
button. • When the OFF is selected, please remember if the picture is frozen. Do not mistake freezing for a malfunction (25). Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. The SOURCE NAME - Hitachi CP-WX1100 | User Manual - Page 46
required to have NTSC format video or 480i@60 format component video source supporting C.C. feature to utilize this function. It may not work properly, depending is for additional information such as news reports or a TV program guide. The information covers the entire screen. Not all of the C.C. - Hitachi CP-WX1100 | User Manual - Page 47
be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the - Hitachi CP-WX1100 | User Manual - Page 48
to 99, and when the passed time with nosignal or an unsuitable signal reaches at the set time, the projector lamp will be turned off. If one of the projector's buttons or the remote control buttons is pressed or one of the commands (except get commands) is transmitted to the CONTROL port during the - Hitachi CP-WX1100 | User Manual - Page 49
functions to MY BUTTON -(1 to 4) on the remote control (7). (1) Use the ▲/▼ buttons on the lens unit. When there is no memory for the lens type, this function is ignored. • MY IMAGE: Displays the MY IMAGE menu (59). This item is to assign an input signals to MY SOURCE button on the remote - Hitachi CP-WX1100 | User Manual - Page 50
the SERVICE menu. Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button on the remote control to execute the item. FAN SPEED Using the ▲/▼ buttons switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. Note that the projector is - Hitachi CP-WX1100 | User Manual - Page 51
when the other two are off. Always at least one sensor is on. REMOTE FREQ. (1) Use the ▲/▼ button to change the projector's remote sensor frequency setting (17). 1:NORMAL ó 2:HIGH (2) Use the ◄/► button to change the projector's remote sensor on or off. ON ó OFF The factory default setting is for - Hitachi CP-WX1100 | User Manual - Page 52
the projector is controlled by a remote control irrespective of the ID setting. Selecting this item displays COMMUNICATION menu. In this menu, you can configure the communication settings of the CONTROL IN and the CONTROL OUT ports. SERVICE the Network Guide (Network Guide - 3.7, - Hitachi CP-WX1100 | User Manual - Page 53
Item SERVICE (continued) OPTION menu Description DAISY CHAIN: Select this type, if it is required to connect multiple projectors using a shared RS-232C communication bus, from the computer. (Network Guide - 3.8 Multi-controlling the plural projectors (using DAISY CHAIN function)) OFF: Select this - Hitachi CP-WX1100 | User Manual - Page 54
OPTION menu Item SERVICE (continued) Description RESPONSE LIMIT TIME This menu is this mode if it is not required to check the responses from the devise that the projector sends data to. In this mode, the projector can send out data from the computer continuously. 1s/2s/3s: Select the time period - Hitachi CP-WX1100 | User Manual - Page 55
ID number to identify projectors connected in the same bus. COMMUNICATION GROUP: A ó B ó C ... O ó P COMMUNICATION ID: 1 ó 2 ó 3 ... 63 ó 64 SERVICE (continued) NOTE • initial setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE, SECURITY and NETWORK settings are not reset. CANCEL OK - Hitachi CP-WX1100 | User Manual - Page 56
settings on this projector may cause trouble on the network projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. See the User's Manual - Network Guide - Hitachi CP-WX1100 | User Manual - Page 57
set to OFF. • The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on Year (last two digits), Month, Date, Hour and Minute. • The projector will override this setting and retrieve DATE AND TIME information from the Time - Hitachi CP-WX1100 | User Manual - Page 58
ENTER or VIDEO button, 1 character or all characters will be erased.The PROJECTOR NAME can be input up to 64 characters. (3) To change an already and press the ►, ENTER or VIDEO button. To revert to the previous PROJECTOR NAME without saving changes, move the cursor to the CANCEL on screen and press - Hitachi CP-WX1100 | User Manual - Page 59
projector. Use the ▲/▼ buttons to select an item which is a still image by the MY IMAGE ( MY IMAGE (Still Image Transfer) Display of the User's Manual - Network Guide remote control. To erase the image displayed and its source file in the projector. (1) P ress the RESET button on the remote - Hitachi CP-WX1100 | User Manual - Page 60
MASK and DEFAULT GATEWAY indicate "0.0.0.0" when DHCP is ON and the projector has not gotten address from DHCP server. Executing this item restarts initializes the network functions. Choose the RESTART EXECUTE using the button ►. SERVICE Then use the button ► to execute. Network will be once cut - Hitachi CP-WX1100 | User Manual - Page 61
NEW PASSWORD box will be displayed for about 20 seconds, please make note of the password during this time. • Pressing the ENTER button on the remote control or ► button on the projector will close the NOTE NEW PASSWORD box. • Please do not forget your password. (continued on next page) 61 - Hitachi CP-WX1100 | User Manual - Page 62
PASSWORD box for about 20 seconds, please make note of the password during this time. • Pressing the ENTER button on the remote control or ► button on the projector will return to MyScreen PASSWORD on/off menu. When a password is set for MyScreen: • The MyScreen registration function (and menu - Hitachi CP-WX1100 | User Manual - Page 63
off if there is no key input for about 5 minutes while the Enter PIN Code box is displayed. This function will activate only when the projector is started after the power switch was turned off. • Please do not forget your PIN code. 2 Turning off the PIN LOCK 2-1 Follow the procedure in - Hitachi CP-WX1100 | User Manual - Page 64
After about 5 minutes of displaying the TRANSITION DETECTOR ON alarm, the lamp will turn off. • Keystone adjustment feature has been prohibited as long this time. • Pressing the ENTER button on the remote control or the ► button on the projector will return to the TRANSITION DETECTOR on/off menu - Hitachi CP-WX1100 | User Manual - Page 65
NOTE PASSWORD box for about 20 seconds, then please make note of the password during this time. • Pressing the ENTER button on the remote control or ► button on the projector will return to the MY TEXT PASSWORD on/off menu. 2 Turning off the MY TEXT PASSWORD 2-1 Follow the procedure in 1-1 to - Hitachi CP-WX1100 | User Manual - Page 66
ó OFF When it is set ON, the MY TEXT will be displayed on the START UP screen and the INPUTINFORMATION- when the INFORMATION on the SERVICE menu is chosen. • This function is available only when the MY TEXT PASSWORD function is set to the OFF. MY TEXT WRITING 1 Use the ▲/▼ buttons - Hitachi CP-WX1100 | User Manual - Page 67
1 BNC R/Cr/Pr G/Y B/Cb/Pb H Y Cb/Pb Cr/Pr V VIDEO 2 The lamp cover 6. Reset the LAMP TIME value. (1) Turn the projector on. The handles (2) To display the ADVANCED MENU, press the MENU button (on the control panel or the remote control). On the EASY MENU, select the "ADVANCED MENU" using the - Hitachi CP-WX1100 | User Manual - Page 68
used, it is possible that there are electrical problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative. • Handle with care: jolting or scratching could cause the lamp bulb to burst during use. • Using the lamp for long periods of time, could cause - Hitachi CP-WX1100 | User Manual - Page 69
TIME value. (1) Turn the projector on. (2) To display the EASY MENU, press the MENU button (on the control panel or the remote control). On the ADVANCED MENU to replace the lamp. WARNING ►Before checking or replacing the filter unit, turn off, unplug, and cool down the projector. ►To keep inside - Hitachi CP-WX1100 | User Manual - Page 70
store or order it from your dealer. HITACHI MAXELL, part number CR2032 or CR2032H lens cleaner. For the inside of the projector In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year. For the cabinet of the projector and remote - Hitachi CP-WX1100 | User Manual - Page 71
Troubleshooting Troubleshooting Related messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please follow the instructions described below. If the same message is displayed after the remedy, or if a message - Hitachi CP-WX1100 | User Manual - Page 72
Troubleshooting Regarding the indicator lamps Lighting and blinking of the POWER indicator, the TEMP indicator, the LAMP indicator, the SECURITY indicator and the SHUTTER indicator have the meanings as described in the table below. Please follow the instructions within the table. If the same - Hitachi CP-WX1100 | User Manual - Page 73
Turned off 3 seconds Turned off Turned off Turned off At least 1 "Power ON" schedule is saved to the projector. (Please refer to the User's Manual - Network Guide: Schedule Settings for more information.) NOTE • When the interior portion has become overheated, for safety purposes, the power - Hitachi CP-WX1100 | User Manual - Page 74
again, wait at least 10 minutes to make the projector cool down enough. - Some setting may be wrong. Please use the FACTORY RESET function of the SERVICE item in the OPTION menu (55) to reset all settings to factory default. Then, if the problem is not removed after the remedy, please contact your - Hitachi CP-WX1100 | User Manual - Page 75
Troubleshooting using the menu 31 function or the remote control. No picture is The computer cannot detect the projector as a plug and play monitor. displayed the projector are not harmonized. Turn off the both equipment, and turn on them again - The signal format on the HDMI is not supported. - Hitachi CP-WX1100 | User Manual - Page 76
Troubleshooting The lamp is approaching the end of its product lifetime. Replace the lamp. 67 lens referring to the section "For the lens" in 70 "Others". Pictures are trembling. The exhaust ventilation holes at front is blocked by some objects. Remove any objects from front side of the projector - Hitachi CP-WX1100 | User Manual - Page 77
Item Product name Specifications Liquid crystal projector Liquid Crystal Panel CP-X10000: 1024 horizontal x 768 vertical CP-WX11000: 1366 horizontal x 800 vertical CP-SX12000: 1400 horizontal x 1050 vertical Lens * See the manual of the optional lens. Lamp Power supply 350W UHB AC 110 - Hitachi CP-WX1100 | User Manual - Page 78
IO 469 Specifications Specifications (continued) 476 [unit: mm] 78 272
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
 |
 |
1
Projector
CP-X10000/CP-WX11000/CP-SX12000
User's Manual (detailed) – Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read the "User's Manual -
Safety Guide" and related manuals to ensure the proper use of this product.
After reading them, store them in a safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This entry warns of a risk of serious personal injury or even
death.
This entry warns of a risk of personal injury or physical damage.
Please refer to the pages written following this symbol.
• Windows
®
is a registered trademark of Microsoft Corporation in the U.S. and/or
other countries.
• VESA and DDC are trademarks of the Video Electronics Standard Association.
• Mac
®
is a registered trademark of Apple Inc.
• DVI is a trademark of Digital Display Working Group.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
• Trademark PJLink is a trademark applied
for trademark rights in Japan, the United
States of America and other countries and areas.
All other trademarks are the properties of their respective owners.
NOTICE
This entry notices of fear of causing trouble.