Hitachi CP-WX1100 Technical Manual

Hitachi CP-WX1100 Manual

Get Hitachi CP-WX1100 PDF manuals and user guides View all Hitachi CP-WX1100 manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi CP-WX1100 manual content summary:

  • Hitachi CP-WX1100 | Technical Manual - Page 1
    Projector CP-X10000/CP-WX11000/CP-SX12000 User's Manual - Operating Guide timing and resolution before connecting this projector to a computer. • Some computers projector can display signals with resolution up to UXGA (1600x1200), the signal will be converted to the projector and projector panel
  • Hitachi CP-WX1100 | Technical Manual - Page 2
    Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Data H. Sync. Display time (C)
  • Hitachi CP-WX1100 | Technical Manual - Page 3
    Connection to the ports AC IN I O Connection to the ports C AB LAN D HDMI DVI-D CONTROL IN CONTROL OUT REMOTE CONTROL IN S-VIDEO MONITOR OUT COMPUTER IN1 COMPUTER IN2 OUT VIDEO 1 BNC R/Cr/Pr G/Y B/Cb/Pb H Y Cb/Pb Cr/Pr V VIDEO 2 E GF A COMPUTER IN1, B COMPUTER
  • Hitachi CP-WX1100 | Technical Manual - Page 4
    mini jack • To be connected with the remote control that came with the projector. CONTROL M IN N OUT D-sub 9pin plug 123 45 67 89 • About the details of RS-232C communication, please refer to the following RS-232C Communication in this manual. Pin Signal Pin Signal Pin Signal 1 (No
  • Hitachi CP-WX1100 | Technical Manual - Page 5
    Connection to the ports (continued) AC IN I O OP Q LAN HDMI DVI-D CONTROL IN CONTROL OUT REMOTE CONTROL S-VIDEO MONITOR OUT IN COMPUTER IN1 COMPUTER IN2 OUT VIDEO 1 BNC R/Cr/Pr G/Y B/Cb/Pb H Y Cb/Pb Cr/Pr V VIDEO 2 O HDMI • Type :Digital video
  • Hitachi CP-WX1100 | Technical Manual - Page 6
    See the following table for the commands for controlling the projector using the PJLinkTM protocol are as given in the table below 31 = BLANK on 1st byte: Refers to Fan error; one of 0 to 2 2nd byte: Refers to Lamp error; one of 0 to 2 3rd byte: Refers to Temptrature error; one of 0 to 2 4th byte:
  • Hitachi CP-WX1100 | Technical Manual - Page 7
    inquiry Parameter or Response 1st number (digits 1 to 5): Lamp Time 2nd number : 0 = Lamp off, 1 = Lamp on 11 12 13 21 22 23 24 31 32 Responds with the name set in "PROJECTOR NAME" of "NETWORK" HITACHI CP-X10000 (XGA model) CP-WX11000 (WXGA model) CP-SX12000 (SXGA+ model) Responds with the factory
  • Hitachi CP-WX1100 | Technical Manual - Page 8
    TD (4) DTR (5) GND (6) DSR (7) RTS (8) DTS (9) RI RS-232C port of the computer Connecting the cable 1. Turn off the projector and the computer. 2. Connect the CONTROL port of the projector with a RS-232C port of the computer by a RS-232C cable (cross). Use the cable that fulfills the specification
  • Hitachi CP-WX1100 | Technical Manual - Page 9
    projector. (2) The projector returns the response code '1DH'+ data (2 bytes) to the computer. Changing the projector the projector the projector cannot execute the received command. When the projector cannot data length code, the projector ignore the excess data when the projector receives an undefined
  • Hitachi CP-WX1100 | Technical Manual - Page 10
    Command Control via the Network Command Control via the Network Communication Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Command Control Settings Configure the following items form a web browser when command control is used. Port Settings Network Control
  • Hitachi CP-WX1100 | Technical Manual - Page 11
    low high low high low high Action (byte_0 - 1) Action Classification Content 1 Set Change setting to desired value. 2 Get Read projector internal setup value. 4 Increment Increment setup value by 1. 5 Decrement Decrement setup value by 1. 6 Execute Run a command. Requesting
  • Hitachi CP-WX1100 | Technical Manual - Page 12
    data length is greater than indicated by the data length code, the projector ignore the excess data code. Conversely when the data length is shorter than sent back to the PC. NOTE • Operation cannot be guaranteed when the projector receives an undefined command or data. • Provide an interval of at
  • Hitachi CP-WX1100 | Technical Manual - Page 13
    data. ACK reply: '06H' + 'xxH' NAK reply: '15H' + 'xxH' Error reply: '1CH' + 'xxxxH' + 'xxH' Data reply: '1DH' + 'xxxxH' + 'xxH' Projector busy reply: '1FH' + 'xxxxH' + 'xxH' Authentication error reply: '1FH' + '0400H' + 'xxH' ('xxH' : connection ID) Automatic Connection Break The TCP connection
  • Hitachi CP-WX1100 | Technical Manual - Page 14
    + command data (6 bytes) Header BE + EF + Packet_Type + 06 + Group + ID + Checksum Data chart Support Command Control the projector Get the projector's status Get the number of connected projectors Set the communication Group identification and Communication ID Get the communication Group identi
  • Hitachi CP-WX1100 | Technical Manual - Page 15
    the control range by using the Group identification and ID. Group ID Direction note 1~16 1~64 Individual control The command is available to the projectors having the same Group identification and ID numbers with command setting. 1~16 0 Designated control The command is available to the
  • Hitachi CP-WX1100 | Technical Manual - Page 16
    byte_1 Action low high byte_2 byte_3 Target Number low high byte_4 byte_5 Connection ID low high Support Command Get the number of connected projectors Set the communication Group identification and Communication ID Get the communication Group identification and Communication ID
  • Hitachi CP-WX1100 | Technical Manual - Page 17
    cannot understand the received command, the error code is sent back to the PC. '95H' + '02H' + connection ID (2 bytes) + '00H' + '00H' When the projector cannot execute the received command, the error code is sent back to the PC. '9CH' + '02H' + connection ID (2 bytes) + error code (2 bytes) Action
  • Hitachi CP-WX1100 | Technical Manual - Page 18
    understand the received command, the error code is sent back to the PC. '96H' + '04H' + connection ID (2 bytes) + '00H' + '00H' + '00H' + '00H' When the projector cannot execute the received command, the error code is sent back to the PC. '9FH' + '06H' + connection ID (2 bytes) + position number of
  • Hitachi CP-WX1100 | Technical Manual - Page 19
    . '97H' + '04H' + connection ID (2 bytes) + '00H' + '00H' + '00H' + '00H' When the projector cannot execute the received command, the error code is sent back to the PC. '91H' + '06H' + connection ID (2 bytes OPTION menu on the OSD (On Screen Display) (User's Manual (detailed) - Operating Guide) 19
  • Hitachi CP-WX1100 | Technical Manual - Page 20
    00 00 04 00 03 00 01 00 02 00 05 00 07 00 09 00 0A 00 00 00 00 00 03 00 (Lamp error) 10 00 (Lens Shift error) 03 20 00 00 03 20 00 00 03 20 00 00 04 20 00 00 04 20 00 00 04
  • Hitachi CP-WX1100 | Technical Manual - Page 21
    RS-232C Communication / Network command table Names Operation Type Header GAMMA Set User Gamma Pattern Set User Gamma Point 1 User Gamma Point 2 User Gamma Point 3 User Gamma Point 4 User Gamma Point 5 User Gamma Point 6 User Gamma Point 7 User Gamma Point 8 COLOR TEMP Set 5 CUSTOM 6 CUSTOM
  • Hitachi CP-WX1100 | Technical Manual - Page 22
    Increment Decrement Get Increment Decrement Get Increment Decrement Get Increment Decrement Execute Get Increment Decrement Execute Get Increment Decrement Execute PRESENTATION THEATER MANUAL Get Get Increment Decrement 1 2 3 4 1 2 3 4 OFF TV FILM Get Header BE EF 03 06 00 BE EF 03 06 00 BE EF 03
  • Hitachi CP-WX1100 | Technical Manual - Page 23
    00 00 00 00 00 00 00 00 00 01 00 02 00 03 00 04 00 00 00 00 00 01 00 00 00 *1 CP-X10000, CP-SX12000 only. *2 CP-WX11000, CP-SX12000 only. *3 CP-WX11000 only. 23
  • Hitachi CP-WX1100 | Technical Manual - Page 24
    RS-232C Communication / Network command table Names Operation Type S-VIDEO FORMAT Set VIDEO 1 FORMAT Set VIDEO 2 FORMAT Set HDMI FORMAT Set DVI-D FORMAT Set HDMI RANGE Set DVI-D RANGE Set COMPUTER IN 1 Set COMPUTER IN 2 Set BNC Set AUTO NTSC PAL SECAM NTSC4.43 M-PAL N-PAL Get AUTO NTSC
  • Hitachi CP-WX1100 | Technical Manual - Page 25
    RS-232C Communication / Network command table Names Operation Type Header Command Data CRC Action Type Setting Code FRAME LOCK - Set COMPUTER IN 1 FRAME LOCK - Set COMPUTER IN 2 FRAME LOCK - BNC Set FRAME LOCK - HDMI Set FRAME LOCK - DVI-D Set KEYSTONE V KEYSTONE V Reset AUTO KEYSTONE V
  • Hitachi CP-WX1100 | Technical Manual - Page 26
    RS-232C Communication / Network command table Names Operation Type MONITOR OUT - Set COMPUTER IN 1 HDMI COMPUTER IN 2 BNC OFF Get MONITOR OUT - Set COMPUTER IN 1 DVI-D COMPUTER IN 2 BNC OFF Get MONITOR OUT - Set COMPUTER IN 1 COMPONENT COMPUTER IN 2 BNC OFF Get MONITOR OUT - Set
  • Hitachi CP-WX1100 | Technical Manual - Page 27
    RS-232C Communication / Network command table Names Operation Type LANGUAGE Set MENU POSITION V MENU POSITION V Reset MENU POSITION H MENU POSITION H Reset BLANK Set BLANK On/Off Set START UP Set MyScreen LOCK Set MESSAGE Set TEMPLATE Set TEMPLATE On/Off Set CLOSED CAPTION Set
  • Hitachi CP-WX1100 | Technical Manual - Page 28
    SOURCE SKIP Set S-VIDEO SOURCE SKIP Set VIDEO 1 SOURCE SKIP Set VIDEO 2 AUTO SEARCH Set DIRECT ON Set AUTO OFF SHUTTER TIMER Set LAMP TIME LOW LAMP TIME HIIGH LAMP TIME Reset FILTER TIME LOW FILTER TIME HIGH FILTER TIME Reset 28 1 2 3 4 Get NORMAL SKIP Get NORMAL SKIP Get NORMAL SKIP Get
  • Hitachi CP-WX1100 | Technical Manual - Page 29
    COMPUTER IN 2 BNC HDMI DVI-D COMPONENT S-VIDEO VIDEO 1 VIDEO 2 INFORMATION AUTO KEYSTONE EXECUTE MY MEMORY ACTIVE IRIS PICTURE MODE FILTER RESET TEMPLATE PbyP SWAP LENS MEMORY-1 LENS MEMORY-2 LENS MEMORY-3 MY IMAGE Get Set COMPUTER IN 1 COMPUTER IN 2 BNC HDMI BE EF 03 06 00 BE EF 03 06 00 BE EF 03
  • Hitachi CP-WX1100 | Technical Manual - Page 30
    S-VIDEO VIDEO 1 VIDEO 2 INFORMATION AUTO KEYSTONE EXECUTE MY MEMORY ACTIVE IRIS PICTURE MODE FILTER RESET TEMPLATE PbyP SWAP LENS MEMORY-1 LENS MEMORY-2 LENS MEMORY-3 MY IMAGE Get Set COMPUTER IN 1 COMPUTER IN 2 BNC HDMI DVI-D COMPONENT S-VIDEO VIDEO 1 VIDEO 2 BE EF
  • Hitachi CP-WX1100 | Technical Manual - Page 31
    IMAGE-2 Delete MY IMAGE IMAGE-3 Delete MY IMAGE IMAGE-4 Delete REMOTE FRONT Set REMOTE REAR Set REMOTE TOP Set REMOTE ID Set REMOTE FREQUENCY Set NORMAL REMOTE FREQUENCY Set HIGH FOCUS ZOOM LENS SHIFT -V LENS SHIFT -H LENS SHIFT CENTERING Get OFF IMAGE-1 IMAGE-2 IMAGE-3 IMAGE-4 Get Execute
  • Hitachi CP-WX1100 | Technical Manual - Page 32
    RS-232C Communication / Network command table Names Operation Type LENS MEMORY INDEX Set LENS MEMORY LOAD LENS MEMORY SAVE LENS MEMORY CLEAR LENS MEMORY FOCUS LENS MEMORY ZOOM LENS MEMORY LENS SHIFT -V LENS MEMORY LENS SHIFT -H LENS MEMORY LENS TYPE MAGNIFY FREEZE Set SHUTTER Set PbyP Set
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
1
Projector
CP-X10000/CP-WX11000/CP-SX12000
User's Manual – Operating Guide
Technical
Resolution (H x V)
H. frequency (kHz)
V. frequency (Hz)
Rating
Signal mode
720 x 400
37.9
85.0
VESA
TEXT
640 x 480
31.5
59.9
VESA
VGA (60Hz)
640 x 480
37.9
72.8
VESA
VGA (72Hz)
640 x 480
37.5
75.0
VESA
VGA (75Hz)
640 x 480
43.3
85.0
VESA
VGA (85Hz)
800 x 600
35.2
56.3
VESA
SVGA (56Hz)
800 x 600
37.9
60.3
VESA
SVGA (60Hz)
800 x 600
48.1
72.2
VESA
SVGA (72Hz)
800 x 600
46.9
75.0
VESA
SVGA (75Hz)
800 x 600
53.7
85.1
VESA
SVGA (85Hz)
832 x 624
49.7
74.5
Mac 16” mode
1024 x 768
48.4
60.0
VESA
XGA (60Hz)
1024 x 768
56.5
70.1
VESA
XGA (70Hz)
1024 x 768
60.0
75.0
VESA
XGA (75Hz)
1024 x 768
68.7
85.0
VESA
XGA (85Hz)
1152 x 864
67.5
75.0
VESA
1152 x 864 (75Hz)
1280 x 960
60.0
60.0
VESA
1280 x 960 (60Hz)
1280 x 1024
64.0
60.0
VESA
SXGA (60Hz)
1280 x 1024
80.0
75.0
VESA
SXGA (75Hz)
*1280 x 1024
91.2
85.0
VESA
SXGA (85Hz)
*1600 x 1200
75.0
60.0
VESA
UXGA (60Hz)
1280 x 768
47.7
60.0
VESA
W-XGA (60Hz)
1400 x 1050
65.3
60.0
VESA
SXGA+ (60Hz)
1280 x800
49.7
60.0
VESA
1280 x 800 (60Hz)
NOTE
• Be sure to check jack type, signal level, timing and resolution
before connecting this projector to a computer.
• Some computers may have multiple display screen modes. Use of some of
these modes will not be possible with this projector.
• Depending on the input signal, full-size display may not be possible in some
cases. Refer to the number of display pixels above.
• Although the projector can display signals with resolution up to UXGA
(1600x1200), the signal will be converted to the projector’s panel resolution
before being displayed. The best display performance will be achieved if the
resolutions of the input signal and projector panel are identical.
• Automatic adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a
composite sync or a sync on G.
• The HDMI input does not support the signals marked with *.
Example of computer signal
Example of computer signal