Hitachi CP-WX410 User Manual
Hitachi CP-WX410 Manual
 |
View all Hitachi CP-WX410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi CP-WX410 manual content summary:
- Hitachi CP-WX410 | User Manual - Page 1
Projector CP-WX410 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read all manuals for this product. Be sure to read "Safety Guide HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks - Hitachi CP-WX410 | User Manual - Page 2
55 Adjusting the projector's elevator . . . 18 Replacing the lamp 55 Adjusting the zoom and focus. . . . . . 18 Cleaning and replacing the air filter . . 57 Using the automatic adjustment feature. . . . 19 Other care 59 Adjusting the position 19 Troubleshooting 60 Correcting the - Hitachi CP-WX410 | User Manual - Page 3
for any business scene. ü This projector realizes the large projection image, even if in a small space. ü The new double layer filter system is expected to function longer and offers you less maintenance frequency. ü The WXGA (1280x800) native resolution can support Widescreen PCs to realize your - Hitachi CP-WX410 | User Manual - Page 4
Part names Projector (1) Lamp cover (&55) The lamp unit is inside. (2) Focus ring (&18) (3) Zoom ring (&18) (4) Control panel (&5) (5) Elevator buttons (x 2) (&18) (6) Elevator feet (x 2) (&18) (7) Remote sensor (&12) (8) Lens (&59) (9) Lens cover (&3) (10) Intake vents (11) Filter cover (&57 - Hitachi CP-WX410 | User Manual - Page 5
switch (&62) (8) CONTROL port (7) (4) (9) USB port (10) C OMPONENT (Y, Cb/Pb, Cr/Pr) ports (11) VIDEO port (12) S -VIDEO port (13) AUDIO IN3 (L,R) ports (14) HDMI port (10) (5) (6) (14) (8) (9) (11) (13) (12) (2) (1) (3) CAUTION ►Use the shutdown switch only when the projector is not - Hitachi CP-WX410 | User Manual - Page 6
Part names Remote control (1) VIDEO button (&16) (2) COMPUTER button (&15) (3) SEARCH button (&17) (4) STANDBY/ON button (&14) (5) ASPECT button (&17) (6) AUTO button (&19) MENU ESC ENTER RESET (10) (4) (3) (7) (12) (14) (11) (13) (15) (18) (21) (23) (25) (26) Back of the remote control 6 - Hitachi CP-WX410 | User Manual - Page 7
(diagonal) b Projection distance (±10%) c1 , c2 Screen height (±10%) On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special installation such as suspending - Hitachi CP-WX410 | User Manual - Page 8
such as a wobbly or inclined stand. • Do not place the projector on its side, front or rear position. • Consult with your dealer before a special installation such as suspending from a ceiling or somewhere else. ►Place the projector in a cool place, and ensure that there is sufficient ventilation - Hitachi CP-WX410 | User Manual - Page 9
your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices the device and the projector. ►Use appropriate accessory or designated cables. Ask your dealer about nonaccessory cables which may be required a specific length or a ferrite - Hitachi CP-WX410 | User Manual - Page 10
with screws. • When connecting a laptop PC to the projector, be sure to activate the PC's external RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the instruction manual of the corresponding laptop PC. • When the - Hitachi CP-WX410 | User Manual - Page 11
chain or wire up to 10 mm in diameter can be attached to the security bar on the projector. Also this product has the security slot for the Kensington lock. For details, see the manual of the security tool. Anti-theft chain or wire Security slot Security bar WARNING ►Do not use - Hitachi CP-WX410 | User Manual - Page 12
leakage and then replace a battery. If the leakage adheres to your body or clothes, rinse well with water immediately. • Obey the local laws on disposing the battery. About the remote control signal The remote control works with the projector's remote sensor. This projector has a remote sensor on - Hitachi CP-WX410 | User Manual - Page 13
REMOTE FREQ. in the SERVICE item of the OPTION menu (45) of the projector to be controlled should be set to the same mode as the remote control . Be sure to check your PC's manuals before connecting this product to the PC. projector is working properly. This function is not available while the lamp - Hitachi CP-WX410 | User Manual - Page 14
). Then wait several seconds because the buttons may not function for these several seconds. 3. Press STANDBY/ON button on the projector or the remote control. The projection lamp will light up and POWER indicator will begin blinking in green. When the power is completely on, the indicator will stop - Hitachi CP-WX410 | User Manual - Page 15
item of AUDIO menu (36). ● W hen the projector is in the standby mode, the volume can be adjusted ESC ENTER RESET 1. Press MUTE button on the remote control. A dialog will appear on the screen indicating that is set to AUTO and the input signal supports the C.C. feature (54). MUTE button MY - Hitachi CP-WX410 | User Manual - Page 16
VOLUME ON UP 㧗 DOWN OFF KEYSTONE MY BUTTON MUTE 1 2 POSITION MENU ENTER ESC RESET 1. Press VIDEO button on the remote control. Each time you press the button, the projector switches its input port from the current port as below. COMPONENT (Y, Cb/Pb, Cr/Pr) S-VIDEO VIDEO VIDEO - Hitachi CP-WX410 | User Manual - Page 17
in above order repeatedly till an input signal is detected. Selecting an aspect ratio 1. Press ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn. F or a computer signal NORMAL 4:3 16:9 16:10 REAL F or an HDMI - Hitachi CP-WX410 | User Manual - Page 18
the elevator feet. 4. After making sure that the elevator feet are locked, put the projector down gently. 5. If necessary, the elevator feet can be manually twisted to make more precise adjustments. Hold the projector when twisting the feet. To loose an elevator foot, push the elevator button on - Hitachi CP-WX410 | User Manual - Page 19
FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION MY SOURCE/ VIDEO COMPUTER DOC.CAMERA menu (44). ASPECT AUTO SEARCH BLANK Adjusting the position 1. Press POSITION button on the remote control when no menu is indicated. The "POSITION" indication will appear on - Hitachi CP-WX410 | User Manual - Page 20
following. (1) AUTO executes automatic vertical keystone correction. (2) MANUAL displays a dialog for keystone correction. Use the ▲/▼ buttons to normal, press the OFF button of MAGNIFY on the remote control. ● The projector automatically exits from the MAGNIFY mode when the input signal is - Hitachi CP-WX410 | User Manual - Page 21
continues projecting a still image for a long time, the LCD panel might possibly be burned in. Do not leave the projector in the FREEZE mode for too long. Temporarily blanking the screen 1. Press BLANK button on the remote control. The BLANK screen will be displayed instead of the screen - Hitachi CP-WX410 | User Manual - Page 22
MENU ENTER ESC OFF ON MAGNAIFSYPVEICFDTREEOEZACEUOTMOPUPTAESUGREPEDAOMRCY.CSCVHAOOUMLERURCBMAEL/EANK 㧗 MY1BUTTON KEYSTONE POSITION 1. Press the MENU button on the remote control or the projector. The Advanced Menu or EASY MENU, which has priority just after powered on will appear. If you want - Hitachi CP-WX410 | User Manual - Page 23
the Advanced Menu, when you want to return to the previous display, press the ◄ cursor button or ESC button on the remote control. 5. Press MENU button on the remote control again to close the menu and complete this operation. Even if you do not do anything, the dialog will automatically disappear - Hitachi CP-WX410 | User Manual - Page 24
EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item ASPECT AUTO KEYSTONE EXECUTE KEYSTONE Description Using the ◄/► buttons switches the mode for aspect ratio. - Hitachi CP-WX410 | User Manual - Page 25
the ◄/► buttons switches the mode for mirror status. See MIRROR item in SETUP menu (35). Performing this item resets all of EASY MENU items except FILTER TIME and LANGUAGE. A dialog is displayed for confirmation. Selecting RESET using the ▲ button performs resetting. The usage time of the air - Hitachi CP-WX410 | User Manual - Page 26
from left end on the test pattern, use the equalizing adjustment bar "1". The darkest tone at the left end of the test pattern cannot be controlled with any of equalizing adjustment bar. • When this function is performed, lines or other distortion may appear. (continued on next page) 26 - Hitachi CP-WX410 | User Manual - Page 27
PICTURE menu (continued) PICTURE menu Item Description Using the ▲/▼ buttons switches the color temperature mode. #1 HIGH � #1 CUSTOM � #2 MID � #2 CUSTOM � � #6 CUSTOM #3 LOW � � #6 Hi-BRIGHT-3 #3 CUSTOM � � #5 CUSTOM � #5 Hi-BRIGHT-2 � #4 CUSTOM � #4 Hi-BRIGHT-1 COLOR TEMP COLOR - Hitachi CP-WX410 | User Manual - Page 28
ó Weak • There may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. This projector has 4 memories for adjustment data (for all the items of PICTURE menu). Selecting a function using the ▲/▼ buttons and pressing the ► or ENTER button - Hitachi CP-WX410 | User Manual - Page 29
IMAGE menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. IMAGE menu Item Description Using the ▲/▼ buttons - Hitachi CP-WX410 | User Manual - Page 30
appear outside a picture. • The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (44). 30 - Hitachi CP-WX410 | User Manual - Page 31
selected, COMPONENT (Y, Cb/Pb, Cr/ Pr) and VIDEO ports will function as a SCART RGB port. A SCART cable is required for a SCART RGB input to the projector. For your reference, see the TECHNICAL part. (continued on next page) 31 - Hitachi CP-WX410 | User Manual - Page 32
INPUT menu INPUT menu (continued) Item VIDEO FORMAT Description The video format for S-VIDEO port and VIDEO port can be set. (1) Use the ◄/► buttons to select the input port. (2) Using the ▲/▼ buttons switches the mode for video format. AUTO ó NTSC ó PAL ó SECAM N-PAL ó M-PAL ó NTSC4.43 • This - Hitachi CP-WX410 | User Manual - Page 33
the SYNC ON G OFF, and then reconnect the signal. The resolution for the COMPUTER IN1 and IN2 input signals can be set on this projector. (1)In the INPUT menu, select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. (2)In the RESOLUTION menu - Hitachi CP-WX410 | User Manual - Page 34
to the (forward/backward) setup angle by itself. This function will be executed only once when selected in the menu. When the slant of the projector is changed, execute this function again. • The adjustable range for correction will vary among inputs. For some input, this function may not work well - Hitachi CP-WX410 | User Manual - Page 35
the standby mode is lowered with some functional restriction as below: • When SAVING is selected, the RS-232C communication control is disabled except to turn the projector on while the projector is in the standby mode. • When SAVING is selected, AUDIO OUT STANDBY setting of AUDIO (36) is invalid - Hitachi CP-WX410 | User Manual - Page 36
C.C.(Closed Caption) is automatically activated, if the C.C. is set to AUTO in the DISPLAY menu of the C.C. menu and the signal from the input port supports the C.C. feature (54). The HDMI AUDIO is set to 1 as default. In case the HDMI audio does not work well, try 2. 1 ó 2 - Hitachi CP-WX410 | User Manual - Page 37
� � SUOMI PORTUGUÊS � � SVENSKA Using the buttons adjusts the menu position. MENU POSITION To quit the operation, press MENU button on the remote control or keep no operation for about 10 seconds. Using the ▲/▼ buttons switches the mode for the BLANK screen. The BLANK screen is a screen - Hitachi CP-WX410 | User Manual - Page 38
SCREEN menu SCREEN menu (continued) Item Description Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF START UP MyScreen ORIGINAL TURN OFF Feature Screen - Hitachi CP-WX410 | User Manual - Page 39
MODE displayed by changing The indication of the MY MEMORY displayed by changing The indication of "FREEZE" and "II" while the projector is in the FREEZE mode. • If the projector goes into the FREEZE mode while the TURN OFF is selected, the picture on screen is frozen without any messages, which is - Hitachi CP-WX410 | User Manual - Page 40
SCREEN menu SCREEN menu (continued) Item SOURCE NAME TEMPLATE Description Each input port for this projector can have a name applied to it. (1)Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. The SOURCE NAME menu - Hitachi CP-WX410 | User Manual - Page 41
items LAMP TIME and FILTER ceiling this feature will not function properly so select the TURN OFF. • This function will be unavailable when the Transition Detector is on (50). Using the ▲/▼ buttons turns on/off the AUTO ON function. TURN ON TURN OFF When set to the TURN ON, the lamp in projector - Hitachi CP-WX410 | User Manual - Page 42
the time is set to 1 to 99, and when the passed time with nosignal or an unsuitable signal reaches at the set time, the projector lamp will be turned off. If one of the projector's buttons or the remote control buttons is pressed or one of the commands (except get commands) is transmitted to the - Hitachi CP-WX410 | User Manual - Page 43
BUTTON MY SOURCE SERVICE Description This item is to assign one of the following functions to MY BUTTON 1 and 2 on the remote control (6). Choose 1 or • PICTURE MODE: Changes the PICTURE MODE (24). • FILTER RESET: Displays the filter time reset confirmation dialog (42). • AV MUTE: Turns the - Hitachi CP-WX410 | User Manual - Page 44
feature is disabled. FINE ó FAST ó DISABLE SERVICE (continued) FINE: Finer tuning including H.SIZE adjustment filter clean, setting the suitable time according to your environment of this projector. • Please check and clean the air filter periodically, even if there is no message. If the air filter - Hitachi CP-WX410 | User Manual - Page 45
SERVICE (continued) Description KEY LOCK Using the ▲/▼ buttons turns on/off the key lock feature. When TURN ON is selected, the buttons on the projector the remote control. REMOTE FREQ. Use the ▲/▼ button to change the projector's remote sensor items LAMP TIME, FILTER TIME, LANGUAGE and SECURITY settings - Hitachi CP-WX410 | User Manual - Page 46
OPTION menu OPTION menu (continued) Item SECURITY Description This projector is equipped with security functions. User registration is required before using the security functions. Please ask your local dealer. 1. Using Security Features 1.1 Inputting the PASSWORD 1.1-1 Use the ▲/▼ buttons on the - Hitachi CP-WX410 | User Manual - Page 47
and hold the INPUT button for 3 seconds while pressing the ► button on the projector. The 10-digit Inquiring Code will be displayed. • If there is no key input digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. SECURITY (continued) 2. Using the - Hitachi CP-WX410 | User Manual - Page 48
dealer with the 10-digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. 3. Using the PIN LOCK Function PIN LOCK is a function which prevents the projector from being used unless a registered Code is input. 3.1 Registering the PIN Code 3.1-1 Use the - Hitachi CP-WX410 | User Manual - Page 49
RESET button on the remote control for 3 seconds, or press and hold the INPUT button for 3 seconds while pressing the ► button on the projector. The 10-digit the projector will turn off. 3.3-2 Contact your dealer with the 10-digit Inquiring Code. Your PASSWORD will be sent after your user - Hitachi CP-WX410 | User Manual - Page 50
menu to display the input signal. If the Transition Detector alarm is displayed for about 5 minutes, the lamp will turn off. This function will activate only when the projector is started after turning off the AC power. 4.2 Setting the Transition Detector PASSWORD 4.2-1 Use the ▲/▼ buttons on - Hitachi CP-WX410 | User Manual - Page 51
-digit Inquiring Code will be displayed inside the box. 4.4-3 Contact your dealer with the 10-digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. (continued on next page) 51 - Hitachi CP-WX410 | User Manual - Page 52
OPTION menu OPTION menu (continued) Item SECURITY (continued) Description 5. Using the MY TEXT PASSWORD function This item allows you to display your own message (MY TEXT) on the START UP screen and INPUT-INFORMATION-. It can be protected by a password to prevent it from being overwritten. 5.1 - Hitachi CP-WX410 | User Manual - Page 53
the PASSWORD during this time. NOTE PASSWORD BOX Pressing the ENTER button on the remote control or INPUT button on the projector will return to the MY TEXT PASSWORD on/off menu. When the PASSWORD is code. Your PASSWORD will be sent after your user registration information is confirmed. 53 - Hitachi CP-WX410 | User Manual - Page 54
have NTSC format video or 480i@60 format component video source supporting C.C. feature to utilize this function. Item Description Select Closed Caption which is for additional information such as news reports or a TV program guide. The information covers the entire screen. Not all of the C.C. - Hitachi CP-WX410 | User Manual - Page 55
Replacing the lamp lamp cover 1. Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes. 2. Prepare a new lamp. If the projector is mounted on a ceiling, or if the lamp has broken, also ask the dealer to replace the lamp. In case of replacement - Hitachi CP-WX410 | User Manual - Page 56
open the lamp cover while the projector is suspended from a ceiling. This is dangerous, since if the lamp's bulb has broken, the shards will fall out when the cover is opened. In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not - Hitachi CP-WX410 | User Manual - Page 57
with your dealer and tell the following type number. Type number : MU05611 When you replace the lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. 1. Turn the projector off, and unplug the power cord. Allow the - Hitachi CP-WX410 | User Manual - Page 58
or too soiled. • When you replace the projection lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. • Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about - Hitachi CP-WX410 | User Manual - Page 59
not touch the lens directly with your hand. Caring for the cabinet and remote control Incorrect care could have adverse influence such as discoloration, peeling paint, etc. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the - Hitachi CP-WX410 | User Manual - Page 60
please set FAN SPEED of the SERVICE item in the OPTION menu to HIGH. A note of precaution when cleaning the air filter. Please immediately turn the power off, and clean or change the air filter referring to the "Cleaning and replacing the air filter" section of this manual. After you have cleaned or - Hitachi CP-WX410 | User Manual - Page 61
Troubleshooting Regarding the indicator lamps When operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER LAMP TEMP indicator indicator indicator Description Lighting Turned Turned The projector is in a standby state. - Hitachi CP-WX410 | User Manual - Page 62
least 10 minutes to make the projector cool down enough. Resetting all settings When it is hard to correct some wrong settings, the FACTORY RESET function of SERVICE item in OPTION menu (45) can reset all settings(except LANGUAGE, FILTER TIME, LAMP TIME, FILTER MESSAGE settings and etc.) to the - Hitachi CP-WX410 | User Manual - Page 63
Troubleshooting , and allow the projector to cool down at least 10 minutes, then turn the power on again. Either there is no lamp and/or lamp cover, or either sound pressing MUTE or VOLUME +/- button come out. on the remote control. The volume is adjusted to an extremely low level. Adjust the volume - Hitachi CP-WX410 | User Manual - Page 64
Troubleshooting Sound does not The HDMI input on this projector supports Linear PCM audio 10 come out. only. remote control. 21 The HDMI cable is not correctly connected. Correctly connect the HDMI cable. 9 Your HDMI equipment is not compatible with the projector. No pictures This projector - Hitachi CP-WX410 | User Manual - Page 65
Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) working. Select NORMAL for WHISPER item in the SETUP menu. The lamp is approaching the end of its product lifetime. Replace the lamp. Either the focus and/or horizontal phase settings are not properly adjusted - Hitachi CP-WX410 | User Manual - Page 66
Specification Item Specification Product name Liquid crystal projector Liquid Crystal Panel Panel size 1.5cm (0.59 type) Drive system TFT active matrix Pixels 1,024,000 pixels (1280 horizontal x 800 vertical) Lens Zoom lens, F = 1.6 ~ 1.8, f = 18.9~ 22.6 mm (approximately) Lamp - Hitachi CP-WX410 | User Manual - Page 67
340 [unit: mm] 67 100 112 270 COMPUTER IN1 COMPUTER IN2 MONITOR OUT HDMI CONTROL USB S-VIDEO AUDIO OUT AUDIO IN AUDIO IN3 Specifications (continued) Specifications
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
 |
 |
1
Projector
CP-WX410
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this
product. Be sure to read “Safety Guide” first. After reading them, store them in a
safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
• Mac is a registered trademark of Apple Inc.
• Windows is a registered trademark of Microsoft Corporation.
• VESA and DDC are trademarks of the Video Electronics Standard Association.
• PowerPC is a registered trademark of International Business Machines
Corporation.
• DVI is a trademark of Digital Display Working Group.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
All other trademarks are the properties of their respective owners.