Hitachi CP-X1250 User Manual
Hitachi CP-X1250 Manual
 |
View all Hitachi CP-X1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi CP-X1250 manual content summary:
- Hitachi CP-X1250 | User Manual - Page 1
TEMP LAMP STANDBY/ON LENS SHIFT BNG COMPONENT S-VIDEO VIDEO MENU INTER RESET FOCUS ZOOM RGB M1-D INPUT KEYSTONE SEARCH Projector CP-X1200/CP-X1250 User's Manual - Operating Guide Thank you for purchasing this projector. WARNING Before using, read the "User's Manual - Safety Guide" and - Hitachi CP-X1250 | User Manual - Page 2
User's Manual - Quick Guide". Your projector should come with the items shown there. Contact your dealer anything is missing. NOTE • Keep the original packing material for future reshipment. For moving the projector, be sure to use the original packing material. Use special caution for the lens part - Hitachi CP-X1250 | User Manual - Page 3
Menu 31 OPTION Menu 33 NETWORK Menu 35 Network Setting Up 36 Lamp 37 Replacing The Lamp ʜʜʜʜʜ38 Air Filter 39 Caring For The Air Filterʜʜʜʜ39 Other Care 40 Caring For The Inside Of The Projector 40 Caring For The Lens ʜʜʜʜʜ40 Caring For The Cabinet And Remote Control 40 Troubleshooting 41 - Hitachi CP-X1250 | User Manual - Page 4
projected from here. 6 Filter cover An air filter is inside. Projector (Front/Right) - AB 8 7 D L F LENS SHIFT COMPONENTBNG S-VIDEO RGB M1-D INPUT INTER KEYSTONE SEARCH RESET VIDEO STANDBY/ON MENU TEMP LAMP G FOCUS ZOOM 3 E AUDIO IN1 REMOTE CONTROL CONTROL NETWORK AUDIO IN2 RGB - Hitachi CP-X1250 | User Manual - Page 5
u VIDEO = STANDBY/ON 1 23 TEMP LAMP FOCUS w ZOOM q TEMP LAMP STANDBY/ON LENS SHIFT BNG COMPONENT S-VIDEO VIDEO MENU INTER RESET FOCUS ZOOM RGB M1-D INPUT KEYSTONE SEARCH Control Panel on the Projector Remote Control 1 STANDBY/ON button 4 LENS SHIFT buttons 6 SEARCH button q ZOOM - Hitachi CP-X1250 | User Manual - Page 6
. • Do not set up and move the projector, while it is hot. • Install the projector in a suitable environment according to instructions of the "User's Manual - Safety Guide" and this manual. • The power outlet should be close to the projector and easily accessible. Refer to the illustrations and - Hitachi CP-X1250 | User Manual - Page 7
The lens of this projector can be shifted vertically. When you want to finely adjust the picture position, use the LENS SHIFT buttons of the projector. LENS SHIFT LENS SHIFT buttons Projector LASER INDICATOR STANDBY/ON VIDEO RGB ++ LENS SHIFT FOCUS -- + ZOOM - BLANK ASPECT LASER Remote control - Hitachi CP-X1250 | User Manual - Page 8
the instruction manual of the corresponding laptop computer. NOTE • Some computers may have multiple display screen modes. Use of some of these modes may not be compatible with this projector. • For some RGB input modes, the optional Mac adapter is necessary. • When the image resolution is changed - Hitachi CP-X1250 | User Manual - Page 9
devices. See the rear of the projector. You can see the ports. Examples of connection with a computer LENS SHIFT COMPONENTBNG S-VIDEO RGB M1-D INPUT INTER KEYSTONE SEARCH RESET VIDEO STANDBY/ON MENU TEMP LAMP FOCUS ZOOM AUDIO IN1 REMOTE CONTROL CONTROL NETWORK AUDIO IN2 RGB RGB OUT - Hitachi CP-X1250 | User Manual - Page 10
Player Projector Audio out (R) Audio out (L) Video out R-AUDIO IN-L VIDEO R-AUDIO IN AUDIO IN-L H VIDEO IN I ■ If using a s-video signal S-video out S-video cable J S -VIDEO Audio out (R) Audio out (L) R-AUDIO IN-L VIDEO R-AUDIO IN H AUDIO IN-L AUDIO IN1 REMOTE CONTROL CONTROL NETWORK - Hitachi CP-X1250 | User Manual - Page 11
power cord to the AC inlet of the projector. 2 Firmly plug the power cord's plug into the outlet. LENS SHIFT COMPONENTBNG S-VIDEO RGB M1-D INPUT INTER KEYSTONE SEARCH RESET VIDEO STANDBY/ON MENU TEMP LAMP FOCUS ZOOM AUDIO IN1 REMOTE CONTROL CONTROL NETWORK AUDIO IN2 RGB RGB OUT R/CR - Hitachi CP-X1250 | User Manual - Page 12
VIDEO RGB + STANDBY/ON ZOOM + - + - - LENS SHIFT FOCUS ASPECT LASER BLANK NEXT PREVIOUS ENTER INTERLINK ELECTRONICS JQA P S C MADE IN CHINA MENU AUTO ESPCOSITMIOANGNOFNRYOESFEFPTinFPREKEEZYVESOTLOUNMMEEUTSEEARCH 1 2 3 ID CHANGE This remote control has a laser pointer in place - Hitachi CP-X1250 | User Manual - Page 13
an extended period. NOTE • Replace the batteries whenever the remote control starts to malfunction. • When strong light, such as direct sunlight or light from an extremely close range (such as from an inverter fluorescent lamp), hits the projector's remote sensor, the remote control may cease to - Hitachi CP-X1250 | User Manual - Page 14
• Do not unplug the connector cables while the computer is operating. Using the USB control feature, you can use the remote control as a simplified mouse or keyboard of the computer. Connect the M1-D port of the projector to the computer via the M1-D cable. Then functions illustrated below will be - Hitachi CP-X1250 | User Manual - Page 15
The projector lamp will go off, and the STANDBY/ON indicator will begin blanking orange. Then the STANDBY/ON indicator will stop blinking LENS SHIFT COMPONENTBNG S-VIDEO RGB M1-D INPUT INTER KEYSTONE SEARCH RESET VIDEO STANDBY/ON MENU TEMP LAMP FOCUS ZOOM AUDIO IN1 REMOTE CONTROL CONTROL - Hitachi CP-X1250 | User Manual - Page 16
button Press the SEARCH button of the projector or the remote control. Pressing the button automatically cycles through input RESET MENU LENS SHIFT COMPONENTBNG S-VIDEO RGB M1-D INPUT INTER KEYSTONE SEARCH RESET VIDEO STANDBY/ON MENU TEMP LAMP FOCUS ZOOM AUDIO IN1 REMOTE CONTROL CONTROL - Hitachi CP-X1250 | User Manual - Page 17
video signal 4:3 16:9 SMALL LASER INDICATOR STANDBY/ON VIDEO RGB ++ LENS SHIFT FOCUS -- + ZOOM - BLANK ASPECT LASER PREVIOUS NEXT ENTER ESC MENU POSITION RESET AUTO MAGNFY PinP VOLUME ON FREEZE MUTE OFF KEYSTONE SEARCH 1 2 3 ID CHANGE ASPECT button memo At a HDTV signal of 1125i or 750p - Hitachi CP-X1250 | User Manual - Page 18
a few seconds. LASER INDICATOR STANDBY/ON VIDEO RGB ++ LENS SHIFT FOCUS -- + ZOOM - BLANK ASPECT LASER PREVIOUS NEXT ENTER ESC MENU POSITION RESET AUTO MAGNFY PinP VOLUME ON FREEZE MUTE OFF KEYSTONE SEARCH 1 2 3 ID CHANGE Correcting The Keystone Distortion 1 Press the KEYSTONE button. As - Hitachi CP-X1250 | User Manual - Page 19
seconds. VOLUME 16 LASER INDICATOR STANDBY/ON VIDEO RGB +++ LENS SHIFT FOCUS ZOOM --- BLANK ASPECT LASER PREVIOUS NEXT ENTER ESC MENU POSITION RESET AUTO MAGNFY PinP VOLUME ON FREEZE MUTE OFF KEYSTONE SEARCH 1 2 3 ID CHANGE MUTE button Temporarily Blanking The Screen 1 Press the BLANK button - Hitachi CP-X1250 | User Manual - Page 20
finish if a remote control's button that changes some display state (ex. blanking the screen, displaying a dialog or a menu, adjusting the picture, changing the input signal) is pressed, or a button of projector is pressed. LASER INDICATOR STANDBY/ON VIDEO RGB ++ LENS SHIFT FOCUS -- + ZOOM - Hitachi CP-X1250 | User Manual - Page 21
"Adjusting The Volume". LASER INDICATOR STANDBY/ON VIDEO RGB +++ LENS SHIFT FOCUS ZOOM --- BLANK ASPECT LASER PREVIOUS NEXT ENTER ESC MENU POSITION RESET AUTO MAGNFY PinP VOLUME ON FREEZE MUTE OFF KEYSTONE SEARCH 1 2 3 ID CHANGE Cursor buttons VOLUME button 3 Press the VOLUME button again to - Hitachi CP-X1250 | User Manual - Page 22
NETWORK : SELECT VOLUME SPEAKER IR REMOTE IR REMOTE ID LAMP TIME FILTER TIME SERVICE RESET 16 TURN ON ALL 1234 h 4321 h MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT VOLUME SPEAKER IR REMOTE IR REMOTE ID LAMP TIME FILTER TIME SERVICE RESET 16 TURN ON ALL 1234 h 4321 - Hitachi CP-X1250 | User Manual - Page 23
be performed. Perform each operation in accordance with the instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT BRIGHT CONTRAST ASPECT WHISPER MIRROR LANGUAGE [Language] RESET +0 +0 4:3 NORMAL NORMAL ENGLISH Item BRIGHT CONTRAST ASPECT WHISPER - Hitachi CP-X1250 | User Manual - Page 24
in accordance with the instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT GAMMA COLOR 100 memo The R, G and B can be selected only when the : SELECT USER is selected under the COLOR TEMP. GAMMA GAMMA Adjust the gamma data using the - Hitachi CP-X1250 | User Manual - Page 25
function.: LOAD1 LOAD2 LOAD3 LOAD4 MY MEMORY SAVE1 SAVE2 SAVE3 SAVE4 This projector has 4 numbered memories for adjustment data. Performing the SAVE1, SAVE2, the picture automatically depending on the data. RESET Select the EXECUTE using the button to reset the PICTURE-1 menu items. : EXECUTE - Hitachi CP-X1250 | User Manual - Page 26
in the table below can INPUT AUTO H SIZE OVER SCAN 1344 95 be performed. Perform each operation in accordance with the SCREEN OPTION RESET instructions in the table below. NETWORK : SELECT memo This menu cannot be selected at a M1-D signal. Item V POSITION H POSITION V POSITION H SIZE OVER - Hitachi CP-X1250 | User Manual - Page 27
, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT COLOR SPACE AUTO COMPONENT COMPONENT VIDEO AUTO 3D-YCS TURN OFF VIDEO NR LOW P. INP - Hitachi CP-X1250 | User Manual - Page 28
Select a signal input port to display just when the projector is turned on, using the / buttons. : the port that was used at the last time. Pressing the (or the ENTER) button displays automatically selected to this item. RESET Select the EXECUTE using the button to reset the INPUT menu items. : - Hitachi CP-X1250 | User Manual - Page 29
instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT ADJUST POWER OFF POWER ON SEARCH RESET ex. When the time is set to 1 to 99, the projector lamp will go off and the STANDBY/ON indicator begins blinking when the passed time with a proper - Hitachi CP-X1250 | User Manual - Page 30
VIDEO button selects the COMPONENT port. memo If no signal is found or the projector is unstable to find an input signal at any of its ports, it will it was in prior to the search. Select the EXECUTE using the button to reset the AUTO menu items. : EXECUTE CANCEL The items of the AUTO menu are - Hitachi CP-X1250 | User Manual - Page 31
instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT BLANK BLACK START UP ORIGINAL MyScreen MyScreen SIZE x1 MyScreen LOCK TURN OFF MENU POSITION MESSAGE TURN ON RESET and the ORIGINAL screens will change to the BLACK screen after - Hitachi CP-X1250 | User Manual - Page 32
of the "Detecting ..." The indication of the input signal by input change. The indication of the aspect ratio by changing the aspect ratio. The indication of "FOCUS" by adjusting the focus. Select the EXECUTE using the button to reset the SCREEN menu items. : EXECUTE CANCEL The items of the SCREEN - Hitachi CP-X1250 | User Manual - Page 33
, the projector is controlled by a remote control irrespective of the position of the ID CHANGE switch. memo Please refer to the section "Using The Remote ID Feature". Pressing the RESET button for about 3 seconds displays the LAMP TIME menu. Select the RESET using button to reset the timer. : RESET - Hitachi CP-X1250 | User Manual - Page 34
adjustment of the lens shift, the zoom and the focus. Select the EXECUTE using the button to reset the OPTION menu items. : EXECUTE CANCEL The items of the OPTION menu are collectively returned to the initial setting. Note that the items "VOLUME", "LAMP TIME" and "FILTER TIME" are not reset. 34 - Hitachi CP-X1250 | User Manual - Page 35
time. Please see the section "Network Setting Up". MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT SETUP DHCP INFORMATION RESET 24 ESC :RETURN ENT :NEXT The IP Address is identification number of the projector on the Network. 1. Set the IP Address using the / buttons. - Hitachi CP-X1250 | User Manual - Page 36
the computer connected to the Network. Although it needs a Web Browser of Internet Explorer 4.0 or higher. Input the same IP address as set to the projector, to the Web Browser of the computer connected to LAN. ex. Case of IP Address = 192.168.1.11 1) Input "http://192.168.1.11". 2) Click "ENTER - Hitachi CP-X1250 | User Manual - Page 37
the bulb is not broken. • Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that the screws are screwed in firmly. Loose screws could result in damage or injury. • Use only the lamp of the specified type DT00601. • If the lamp breaks soon after the first time it - Hitachi CP-X1250 | User Manual - Page 38
cover does't PC CO LAMP come up. 7 Turn on the projector, and reset the lamp timer. (1) While the projector running, press the MENU button to open the menu. (2) Choose the "OPTION" on the menu using the / button, then press the button or ENTER button. (3) Choose the "LAMP TIME" using the / button - Hitachi CP-X1250 | User Manual - Page 39
the cleaned air filter or a new air filter, and replace the filter cover. Hold the release button of the air filter while 5 Turn on the projector power, and reset the filter timer. (1) While the projector running, press the MENU button to TEMP LAMP STANDBY/ON pulling out it. LENS SHIFT BNG - Hitachi CP-X1250 | User Manual - Page 40
2 years. Caring For The Lens 1 Turn off the projector, and unplug the power cord. 2 Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens directly with your hand. Caring For The Cabinet And Remote Control 1 Turn off the projector, and unplug the power cord - Hitachi CP-X1250 | User Manual - Page 41
REPLACING LAMP, RESET THE LAMP TIMER. Description The time the lamp timer has counted is approaching 2000 hours. Preparation of a new lamp, and an early lamp change is recommended. After you have change the lamp, please be sure to reset the lamp timer. CHANGE THE LAMP AFTER REPLACING LAMP, RESET - Hitachi CP-X1250 | User Manual - Page 42
Troubleshooting (continued) Related Messages (continued) Message Description CLEAN THE AIR FILTER POWER OFF FIRST, THEN CLEAN THE AIR FILTER. AFTER CLEANING THE AIR FILTER, RESET THE FILTER TIMER. The time the filter timer has counted has reached 100 hours. Please clear or change the air filter - Hitachi CP-X1250 | User Manual - Page 43
on again. • Is there blockage of the air passage aperture? • Is the air filter dirty? • Does the peripheral temperature exceed 35°C? If the same indication is displayed after the treatment, please change the lamp by referring to the section "Lamp". (This table is continued to the following page - Hitachi CP-X1250 | User Manual - Page 44
in Red It is time to clean the air filter, or there is no air filter. Please immediately turn the power OFF, and clean or change the air filter by referring to the section "Air Filter". After cleaning or changed the lamp, please be sure to reset the filter timer. After the treatment, resent - Hitachi CP-X1250 | User Manual - Page 45
Troubleshooting (continued) Phenomena That May Easily Be Mistaken For Machine Defects WARNING • Never use the projector your dealer or service company. Before requesting repair, please check projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp - Hitachi CP-X1250 | User Manual - Page 46
Troubleshooting or Perform picture adjustments by changing the COLOR BAL R, Replace the lamp. 23 23 35, 36 Either the focus and/or horizontal phase settings are not Pictures appear properly. Adjust the focus using the focus buttons, and/or H PHASE using the 16 blurry. menu function. The lens - Hitachi CP-X1250 | User Manual - Page 47
are subject to change without notice. Item Product name Liquid crystal panel Panel size Drive system Pixels Lens Lamp Speaker Power supply Power consumption Temperature range Size Weight (mass) Ports Optional Parts Lamp Air filter Others Specification Liquid crystal projector 2.5 cm
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
 |
 |
1
Projector
CP-X1200/CP-X1250
CP-X1200/CP-X1250
User's Manual - Operating Guide
User's Manual - Operating Guide
Thank you for purchasing this projector.
TRADEMARK ACKNOWLEDGMENT :
• VGA and XGA are registered trademarks of the International Business Machines Corporation.
• Apple and Mac are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• Internet Explorer is a trademark of Microsoft Corporation.
All other trademarks are the property of their respective owners.
WARNING
Before using, read the "User's Manual - Safety Guide" and
these manuals to ensure correct usage through understanding. After reading,
store them in a safe place for future reference.
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transmission or use of this document or contents is not permitted without
express written authority.
NOTE