Hitachi CP-X2511 Technical Manual

Hitachi CP-X2511 Manual

Get Hitachi CP-X2511 PDF manuals and user guides View all Hitachi CP-X2511 manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi CP-X2511 manual content summary:

  • Hitachi CP-X2511 | Technical Manual - Page 1
    Projector CP-X2510Z/CP-X3010Z CP-X2011/CP-X2511/CP-X3011/CP-X3511 User's Manual (detailed) Operating Guide - Technical Example of PC projector. • Depending on the input signal, full-size display may not be possible in some cases. Refer to the number of display pixels above. • Although the projector
  • Hitachi CP-X2511 | Technical Manual - Page 2
    Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some PC models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Back porch (b) Front porch (d) Data H.
  • Hitachi CP-X2511 | Technical Manual - Page 3
    the ports Connection to the ports NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the input ports of the projector are recessed. C B A A COMPUTER IN1, B COMPUTER IN2, C MONITOR OUT D-sub 15pin mini shrink jack • Video signal: RGB separate, Analog, 0.7Vp
  • Hitachi CP-X2511 | Technical Manual - Page 4
    Connection to the ports (continued) G DE F H COMPONENT D Y, E Cb/Pb, F Cr/Pr RCA jack x3 • System: 480i@60, 480p@60, 576i@50, 576p@50, 720p@50/60, 1080i@50/60, 1080p@50/60 Port Signal Y Component video Y, 1.0±0.1Vp-p with composite sync, 75Ω terminator Cb/Pb Component video Cb/Pb, 0.7±0.1Vp-p,
  • Hitachi CP-X2511 | Technical Manual - Page 5
    Connection to the ports (continued) I J K LMN I AUDIO IN1, J AUDIO IN2 Ø3.5 stereo mini jack • 200 mVrms 47kΩ terminator AUDIO IN3 K R, L L RCA jack x2 • 200 mVrms 47kΩ terminator AUDIO OUT M R, N L RCA jack x2 • 200 mVrms 1kΩ output impedance 5
  • Hitachi CP-X2511 | Technical Manual - Page 6
    Connection to the ports (continued) O P O USB 21 USB B type jack Pin Signal 34 1 +5V 2 - Data 3 + Data 4 Ground P CONTROL D-sub 9pin plug • About the details of RS-232C communication, please refer to the following page. Pin Signal 1 (No connection) 2 RD 3 TD Pin Signal 4 (No
  • Hitachi CP-X2511 | Technical Manual - Page 7
    connectors Y CB/PB CR/PR COMPONENT VIDEO OUT VCR/DVD player To input component video signal to the COMPUTER IN1 or IN2 port of the projector, use a RCA to D-sub cable or adapter. For about the pin description of the required cable or adapter, refer to the descriptions about COMPUTER IN1
  • Hitachi CP-X2511 | Technical Manual - Page 8
    from the computer. For details of RS-232C commands, refer to RS-232C Communication command table (&9). Connection 1. Turn off the projector and the computer. 2. Connect the projector's CONTROL port and the computer's RS-232C port with a RS-232C cable (cross). Use the cable that fulfills the speci
  • Hitachi CP-X2511 | Technical Manual - Page 9
    [(eL)(eH)]. (aL) (aH) 01h 00h (bL) (bH) (cL) (cH) Read projector internal setup value [(bL) (bH)] . (aL) (aH) 02h 00h (bL) (bH) 00h 00h bL)(bH)]. (aL) (aH) 06h 00h (bL) (bH) 00h 00h [Header code], [Packet], [Data size] Set [BEh, EFh, 03h, 06h, 00h] to byte number 0 ~ 4. [CRC flag] For byte
  • Hitachi CP-X2511 | Technical Manual - Page 10
    06 00 D9 D8 02 00 20 60 00 00 [Example return] 00 00 [Normal] 01 00 [Cover error] 02 00 [Fan error] 03 00 [Lamp error] 04 00 [Temp error] 05 00 [Air flow error] 07 00 [Cold error] 08 00 [Filter error] BE EF 03 06 00 7C D2
  • Hitachi CP-X2511 | Technical Manual - Page 11
    Set User Gamma Point 1 User Gamma Point 1 Reset User Gamma Point 2 User Gamma Point 2 Reset User Gamma Point 3 User Gamma Point 3 Reset User Gamma Point 4 User Gamma Point 4 Reset User Gamma Point 5 User Gamma Point 5 Reset User Gamma Point 6 User Gamma Point 6 Reset User Gamma Point 7 User Gamma
  • Hitachi CP-X2511 | Technical Manual - Page 12
    RS-232C Communication command table (continued) Names Operation Type User Gamma Point 8 User Gamma Point 8 Reset COLOR TEMP Set COLOR TEMP GAIN R COLOR TEMP GAIN R Reset COLOR TEMP GAIN G COLOR TEMP GAIN G Reset COLOR TEMP GAIN B COLOR TEMP
  • Hitachi CP-X2511 | Technical Manual - Page 13
    03 BE EF 03 BE EF 03 BE EF 03 BE EF 03 BE EF 03 BE EF 03 *ACTIVE IRIS is not available for CP-X2011. 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00
  • Hitachi CP-X2511 | Technical Manual - Page 14
    RS-232C Communication command table (continued) Names Operation Type H SIZE H SIZE Reset AUTO ADJUST EXECUTE PROGRESSIVE Set VIDEO NR Set COLOR SPACE Set COMPONENT Set S-VIDEO FORMAT Set C-VIDEO FORMAT Set COMPUTER IN1 Set COMPUTER IN2
  • Hitachi CP-X2511 | Technical Manual - Page 15
    RS-232C Communication command table (continued) Names Operation Type FRAME LOCK - Set COMPUTER IN1 FRAME LOCK - Set COMPUTER IN2 AUTO KEYSTONE V EXECUTE KEYSTONE V KEYSTONE V Reset ECO MODE Set MIRROR Set STANDBY MODE Set MONITOR OUT - Set COMPUTER IN1 MONITOR OUT - Set COMPUTER IN2 MONITOR
  • Hitachi CP-X2511 | Technical Manual - Page 16
    RS-232C Communication command table (continued) Names Operation Type VOLUME COMPUTER IN2 VOLUME COMPONENT VOLUME - S-VIDEO VOLUME - VIDEO VOLUME AUDIO OUT STANDBY MUTE Set SPEAKER Set AUDIO SOURCE - Set COMPUTER IN1 AUDIO SOURCE - Set COMPUTER IN2 AUDIO SOURCE - Set COMPONENT AUDIO
  • Hitachi CP-X2511 | Technical Manual - Page 17
    00 Decrement BE EF 03 06 00 MENU POSITION V Reset Execute BE EF 03 06 00 * Not all of the languages in the table are supported. CRC 7A DF 8A DF 1A DE EA DE D9 DE F7 D3 67 D2 97 D2 07 D3 37 D1 A7 D0 57 D0
  • Hitachi CP-X2511 | Technical Manual - Page 18
    RS-232C Communication command table (continued) Names Operation Type BLANK Set BLANK On/Off Set START UP Set MyScreen Lock Set MESSAGE Set TEMPLATE Set TEMPLATE On/Off Set C. C. - DISPLAY Set C. C. - MODE Set C. C. - CHANNEL Set AUTO SEARCH Set AUTO KEYSTONE Set DIRECT ON Set
  • Hitachi CP-X2511 | Technical Manual - Page 19
    00 Increment BE EF 03 06 00 Decrement BE EF 03 06 00 LAMP TIME Get BE EF 03 06 00 LAMP TIME Reset Execute BE EF 03 06 00 FILTER TIME Get BE 03 06 00 REMOTE FREQ. Set OFF HIGH ON BE EF 03 06 00 BE EF 03 06 00 Get BE EF 03 06 00 * ACTIVE IRIS is not available for CP-X2011. CRC 08
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
1
Projector
CP-X2510Z/CP-X3010Z
CP-X2011/CP-X2511/CP-X3011/CP-X3511
User's Manual (detailed)
Operating Guide – Technical
Resolution (H x V)
H. frequency (kHz)
V. frequency (Hz)
Rating
Signal mode
720 x 400
37.9
85.0
VESA
TEXT
640 x 480
31.5
59.9
VESA
VGA (60Hz)
640 x 480
37.9
72.8
VESA
VGA (72Hz)
640 x 480
37.5
75.0
VESA
VGA (75Hz)
640 x 480
43.3
85.0
VESA
VGA (85Hz)
800 x 600
35.2
56.3
VESA
SVGA (56Hz)
800 x 600
37.9
60.3
VESA
SVGA (60Hz)
800 x 600
48.1
72.2
VESA
SVGA (72Hz)
800 x 600
46.9
75.0
VESA
SVGA (75Hz)
800 x 600
53.7
85.1
VESA
SVGA (85Hz)
832 x 624
49.7
74.5
Mac 16” mode
1024 x 768
48.4
60.0
VESA
XGA (60Hz)
1024 x 768
56.5
70.1
VESA
XGA (70Hz)
1024 x 768
60.0
75.0
VESA
XGA (75Hz)
1024 x 768
68.7
85.0
VESA
XGA (85Hz)
1152 x 864
67.5
75.0
VESA
1152 x 864 (75Hz)
1280 x 768
47.7
60.0
VESA
W-XGA (60Hz)
1280 x 800
49.7
60.0
VESA
1280 x 800 (60Hz)
1280 x 960
60.0
60.0
VESA
1280 x 960 (60Hz)
1280 x 1024
64.0
60.0
VESA
SXGA (60Hz)
1280 x 1024
80.0
75.0
VESA
SXGA (75Hz)
1280 x 1024
91.1
85.0
VESA
SXGA (85Hz)
1400 x 1050
65.2
60.0
VESA
SXGA+ (60Hz)
1600 x 1200
75.0
60.0
VESA
UXGA (60Hz)
NOTE
• Be sure to check jack type, signal level, timing and resolution
before connecting this projector to a PC.
• Some PCs may have multiple display screen modes. Use of some of these
modes will not be possible with this projector.
• Depending on the input signal, full-size display may not be possible in some
cases. Refer to the number of display pixels above.
• Although the projector can display signals with resolution up to UXGA
(1600x1200), the signal will be converted to the projector’s panel resolution
before being displayed. The best display performance will be achieved if the
resolutions of the input signal and projector panel are identical.
• Automatic adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a
composite sync or a sync on G.
Example of PC signal