Hitachi CPX1200 User Manual
Hitachi CPX1200 - XGA LCD Projector Manual
 |
View all Hitachi CPX1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi CPX1200 manual content summary:
- Hitachi CPX1200 | User Manual - Page 1
Portable LCD Projector CP-X1200 / CP-X1250 User's Manual - Safety Guide Please read this user's manual thoroughly to ensure correct usage understanding. User's Manual - Quick Guide Please read this user's manual thoroughly to ensure correct usage understanding. User's Manual - Operating Guide - Hitachi CPX1200 | User Manual - Page 2
Projector User's Manual - Safety Guide Thank you for purchasing this projector. WARNING • Before using, read these user's manuals of this projector to ensure correct usage through understanding. After reading, store them in a safe place for future reference. Incorrect handling of this product could - Hitachi CPX1200 | User Manual - Page 3
an unstable, slant or vibrant surface such as a wobbly or inclined stand. • Use the caster brakes placing the projector on a stand with casters. • Do not place the projector in the side up position, the lens up position or the lens down position. • In the case of a ceiling installation or the like - Hitachi CPX1200 | User Manual - Page 4
temperatures of the projector. High temperatures are generated when the lamp is lit. It could result in fire or burn. Use special caution in households where children are present. Do not touch about the lens, air fans and ventilation openings during use or immediately after use, to prevent a burn - Hitachi CPX1200 | User Manual - Page 5
lamp. The projector uses a high-pressure mercury glass lamp made of glass. The lamp can break with a loud bang, or burn out. When the bulb bursts, it is possible for shards of glass to fly into the lamp careful in handling the battery of the remote control. Incorrect handling of the battery could - Hitachi CPX1200 | User Manual - Page 6
when you buy a replacement lamp for this projector. • Do not turn on the projector without air filter. Avoid a high temperature environment. The heat could have adverse influence on the cabinet of the projector and other parts. Do not place the projector, the remote control and other parts in - Hitachi CPX1200 | User Manual - Page 7
a whole white screen for 1 hour or more. You can use the BLANK function of the projector. About consumables. Lamp, LCD panels, polarizors and other optical components, and air filter and cooling fans have a different lifetime in each. These parts may need to be replaced after a long usage time, even - Hitachi CPX1200 | User Manual - Page 8
the display of CRT. • Do not use a polarized screen. It can cause red image. Turn the power on/off in right order. To prevent any trouble, turn on/off the projector in right order mentioned below unless specifying. • Power on the projector before the computer or video tape recorder. • Power off the - Hitachi CPX1200 | User Manual - Page 9
if the bulb is not broken. • Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that the screws are screwed in firmly. Loose screws could result in damage or injury. • Use the lamp of the specified type only. • If the lamp breaks soon after the first time it is - Hitachi CPX1200 | User Manual - Page 10
paragraph of WARNING in this manual), when a problem occurs with the equipment, first refer to the "Troubleshooting" section of the "User's manual - Operating Guide", and run through the suggested checks. If this does not resolve the problem contact your dealer or service company. They will tell you - Hitachi CPX1200 | User Manual - Page 11
LAMP STANDBY/ON LENS SHIFT BNG COMPONENT S-VIDEO VIDEO MENU INTER RESET FOCUS ZOOM RGB M1-D INPUT KEYSTONE SEARCH Projector CP-X1200/CP-X1250 User's Manual - Quick Guide Thank you for purchasing this projector. WARNING Before using, read the "User's Manual - Safety Guide" and these manuals - Hitachi CPX1200 | User Manual - Page 12
your devices. See the rear of the projector. You can see the ports. Connecting to a computer LENS SHIFT COMPONENTBNG S-VIDEO RGB M1-D INPUT INTER KEYSTONE SEARCH RESET VIDEO STANDBY/ON MENU TEMP LAMP FOCUS ZOOM AUDIO IN1 REMOTE CONTROL CONTROL NETWORK AUDIO IN2 RGB RGB OUT R/CR - Hitachi CPX1200 | User Manual - Page 13
OUT REMOTE CONTROL M AUDIO OUT CR/PR Ca/Pa CONTROL Y NETWORK R/CR/PR G/Y B/CB/PB H V BNC R-AUDIO IN-L VIDEO S-VIDEO VCR/DVD Player Projector Audio out (R) Audio out (L) Video out R-AUDIO IN-L VIDEO R-AUDIO IN AUDIO IN-L H VIDEO IN I ■ If using a s-video signal S-video out S-video - Hitachi CPX1200 | User Manual - Page 14
power cord to the AC inlet of the projector. 2 Firmly plug the power cord's plug into the outlet. LENS SHIFT COMPONENTBNG S-VIDEO RGB M1-D INPUT INTER KEYSTONE SEARCH RESET VIDEO STANDBY/ON MENU TEMP LAMP FOCUS ZOOM AUDIO IN1 REMOTE CONTROL CONTROL NETWORK AUDIO IN2 RGB RGB OUT R/CR - Hitachi CPX1200 | User Manual - Page 15
ID CHANGE CAUTION • About the battery • Keep a battery away from children and pets. • Use only the battery specified: two AA batteries. • Do not mix new battery with used one. • Make sure the plus and minus terminals are correctly aligned when loading the battery (as indicated in the remote control - Hitachi CPX1200 | User Manual - Page 16
TEMP LAMP STANDBY/ON LENS SHIFT BNG COMPONENT S-VIDEO VIDEO MENU INTER RESET FOCUS ZOOM RGB M1-D INPUT KEYSTONE SEARCH Projector CP-X1200/CP-X1250 User's Manual - Operating Guide Thank you for purchasing this projector. WARNING Before using, read the "User's Manual - Safety Guide" and - Hitachi CPX1200 | User Manual - Page 17
Features This multimedia projector is used to project various computer signals as well as NTSC/PAL/SECAM video signals onto a screen. Little space is required for installation and large images can easily be realized. ●Ultra High Brightness Crisp, ultra-bright presentations is achieved by using a UHB - Hitachi CPX1200 | User Manual - Page 18
Menu 35 Network Setting Up 36 Lamp 37 Replacing The Lamp ʜʜʜʜʜ38 Air Filter 39 Caring For The Air Filterʜʜʜʜ39 Other Care 40 Caring For The Inside Of The Projector 40 Caring For The Lens ʜʜʜʜʜ40 Caring For The Cabinet And Remote Control 40 Troubleshooting 41 Related Messages 41 Regarding - Hitachi CPX1200 | User Manual - Page 19
projected from here. 6 Filter cover An air filter is inside. Projector (Front/Right) - AB 8 7 D L F LENS SHIFT COMPONENTBNG S-VIDEO RGB M1-D INPUT INTER KEYSTONE SEARCH RESET VIDEO STANDBY/ON MENU TEMP LAMP G FOCUS ZOOM 3 E AUDIO IN1 REMOTE CONTROL CONTROL NETWORK AUDIO IN2 RGB - Hitachi CPX1200 | User Manual - Page 20
SEARCH 5 t RESET y r MENU u VIDEO = STANDBY/ON 1 23 TEMP LAMP FOCUS w ZOOM q TEMP LAMP STANDBY/ON LENS SHIFT BNG COMPONENT S-VIDEO VIDEO MENU INTER RESET FOCUS ZOOM RGB M1-D INPUT KEYSTONE SEARCH Control Panel on the Projector Remote Control 1 STANDBY/ON button 4 LENS SHIFT buttons - Hitachi CPX1200 | User Manual - Page 21
in a suitable environment according to instructions of the "User's Manual - Safety Guide" and this manual. • The power outlet should be close to the projector and easily accessible. Refer to the illustrations and tables below to determine the screen size and projection distance. The values shown in - Hitachi CPX1200 | User Manual - Page 22
The lens of this projector can be shifted vertically. When you want to finely adjust the picture position, use the LENS SHIFT buttons of the projector. LENS SHIFT LENS SHIFT buttons Projector LASER INDICATOR STANDBY/ON VIDEO RGB ++ LENS SHIFT FOCUS -- + ZOOM - BLANK ASPECT LASER Remote control - Hitachi CPX1200 | User Manual - Page 23
the instruction manual of the corresponding laptop computer. NOTE • Some computers may have multiple display screen modes. Use of some of these modes may not be compatible with this projector. • For some RGB input modes, the optional Mac adapter is necessary. • When the image resolution is changed - Hitachi CPX1200 | User Manual - Page 24
devices. See the rear of the projector. You can see the ports. Examples of connection with a computer LENS SHIFT COMPONENTBNG S-VIDEO RGB M1-D INPUT INTER KEYSTONE SEARCH RESET VIDEO STANDBY/ON MENU TEMP LAMP FOCUS ZOOM AUDIO IN1 REMOTE CONTROL CONTROL NETWORK AUDIO IN2 RGB RGB OUT - Hitachi CPX1200 | User Manual - Page 25
Player Projector Audio out (R) Audio out (L) Video out R-AUDIO IN-L VIDEO R-AUDIO IN AUDIO IN-L H VIDEO IN I ■ If using a s-video signal S-video out S-video cable J S -VIDEO Audio out (R) Audio out (L) R-AUDIO IN-L VIDEO R-AUDIO IN H AUDIO IN-L AUDIO IN1 REMOTE CONTROL CONTROL NETWORK - Hitachi CPX1200 | User Manual - Page 26
power cord to the AC inlet of the projector. 2 Firmly plug the power cord's plug into the outlet. LENS SHIFT COMPONENTBNG S-VIDEO RGB M1-D INPUT INTER KEYSTONE SEARCH RESET VIDEO STANDBY/ON MENU TEMP LAMP FOCUS ZOOM AUDIO IN1 REMOTE CONTROL CONTROL NETWORK AUDIO IN2 RGB RGB OUT R/CR - Hitachi CPX1200 | User Manual - Page 27
LASER INDICATOR VIDEO RGB + STANDBY/ON ZOOM + - + - - LENS SHIFT FOCUS ASPECT LASER BLANK NEXT PREVIOUS ENTER INTERLINK ELECTRONICS JQA P S C MADE IN CHINA MENU AUTO ESPCOSITMIOANGNOFNRYOESFEFPTinFPREKEEZYVESOTLOUNMMEEUTSEEARCH 1 2 3 ID CHANGE This remote control has a laser - Hitachi CPX1200 | User Manual - Page 28
R-AUDIO IN-L VIDEO S-VIDEO approximately 3 meters • Also a remote signal reflected in the screen etc. may be available. If it is difficult to send a remote signal to the sensor directly, please try. • Since the remote control uses infrared light to send signals to the projector (Class1 LED), be - Hitachi CPX1200 | User Manual - Page 29
. memo The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to use the remote control, depending on the computer's configurations and mouse drivers. memo The function can be used only for the functions illustrated on the right. memo The projector would be enumerated - Hitachi CPX1200 | User Manual - Page 30
The projector lamp will go off, and the STANDBY/ON indicator will begin blanking orange. Then the STANDBY/ON indicator will stop blinking LENS SHIFT COMPONENTBNG S-VIDEO RGB M1-D INPUT INTER KEYSTONE SEARCH RESET VIDEO STANDBY/ON MENU TEMP LAMP FOCUS ZOOM AUDIO IN1 REMOTE CONTROL CONTROL - Hitachi CPX1200 | User Manual - Page 31
the ZOOM buttons to adjust the screen size. 3 Use the FOCUS buttons to adjust the focus. ZOOM buttons LENS SHIFT COMPONENTBNG S-VIDEO RGB M1-D INPUT INTER KEYSTONE SEARCH RESET VIDEO STANDBY/ON MENU TEMP LAMP FOCUS ZOOM AUDIO IN1 REMOTE CONTROL CONTROL NETWORK AUDIO IN2 RGB RGB OUT - Hitachi CPX1200 | User Manual - Page 32
STANDBY/ON VIDEO RGB ++ LENS SHIFT FOCUS -- + ZOOM - BLANK ASPECT LASER PREVIOUS NEXT ENTER ESC MENU POSITION RESET AUTO MAGNFY PinP VOLUME ON FREEZE MUTE OFF KEYSTONE SEARCH 1 2 3 ID CHANGE ASPECT button memo At a HDTV signal of 1125i or 750p, only 16:9 can be selected. Using The - Hitachi CPX1200 | User Manual - Page 33
MENU POSITION RESET AUTO MAGNFY PinP VOLUME ON FREEZE MUTE OFF KEYSTONE SEARCH 1 2 3 ID CHANGE Correcting The Keystone Distortion 1 Press the KEYSTONE button. As illustrated on the right, a dialog will appear on the screen to aid you in correcting the keystone distortion. Use the cursor buttons - Hitachi CPX1200 | User Manual - Page 34
again to remove the blank screen, and return to the input signal screen. LASER INDICATOR STANDBY/ON VIDEO RGB +++ LENS SHIFT FOCUS ZOOM --- BLANK ASPECT LASER PREVIOUS NEXT ENTER ESC MENU POSITION RESET AUTO MAGNFY PinP VOLUME ON FREEZE MUTE OFF KEYSTONE SEARCH 1 2 3 ID CHANGE BLANK button 19 - Hitachi CPX1200 | User Manual - Page 35
finish if a remote control's button that changes some display state (ex. blanking the screen, displaying a dialog or a menu, adjusting the picture, changing the input signal) is pressed, or a button of projector is pressed. LASER INDICATOR STANDBY/ON VIDEO RGB ++ LENS SHIFT FOCUS -- + ZOOM - Hitachi CPX1200 | User Manual - Page 36
selected to main screen. 1 Press the PinP button. The child window with a picture of a video signal will appear. 2 Press the PinP button again to change the size of the child window or close the window. Small child window Large child window LASER INDICATOR STANDBY/ON VIDEO RGB ++ LENS SHIFT FOCUS - Hitachi CPX1200 | User Manual - Page 37
NETWORK : SELECT VOLUME SPEAKER IR REMOTE IR REMOTE ID LAMP TIME FILTER TIME SERVICE RESET 16 TURN ON ALL 1234 h 4321 h MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT VOLUME SPEAKER IR REMOTE IR REMOTE ID LAMP TIME FILTER TIME SERVICE RESET 16 TURN ON ALL 1234 h 4321 - Hitachi CPX1200 | User Manual - Page 38
the instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT BRIGHT CONTRAST ASPECT WHISPER MIRROR LANGUAGE [Language] RESET +0 +0 4:3 NORMAL NORMAL ENGLISH Item BRIGHT CONTRAST ASPECT WHISPER MIRROR Description Adjust the brightness using the - Hitachi CPX1200 | User Manual - Page 39
in accordance with the instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT GAMMA video signal. COLOR Adjust the whole color using the / buttons. : Strong Weak memo This item can be selected only at a video signal. TINT Adjust the tint using - Hitachi CPX1200 | User Manual - Page 40
using the / buttons, and then press the (or the ENTER) button to perform the function.: LOAD1 LOAD2 LOAD3 LOAD4 MY MEMORY SAVE1 SAVE2 SAVE3 SAVE4 This projector the picture automatically depending on the data. RESET Select the EXECUTE using the button to reset the PICTURE-1 menu items. : EXECUTE - Hitachi CPX1200 | User Manual - Page 41
be performed. Perform each operation in accordance with the SCREEN OPTION RESET instructions in the table below. NETWORK : SELECT memo This RGB signal or a component video signal other than a COMPONENT port input of 525i/625i/SCART RGB. Adjust the horizontal size using the / buttons. : Large - Hitachi CPX1200 | User Manual - Page 42
of NTSC3.58. memo When this function performs, the setting of the item "VIDEO NR" of this INPUT menu is not effective. VIDEO NR Select a noise reduction level using the / buttons. : HIGH MIDDLE LOW The noise on screen is reduced according to the selected level. memo This item performs only at - Hitachi CPX1200 | User Manual - Page 43
refer to the section "Displaying the Child Window". Select a signal input port to display just when the projector is turned on, using the / buttons. : LAST INPUT M1-D RGB BNC COMPONENT S-VIDEO VIDEO Selecting the LAST INPUT selects the port that was used at the last time. Pressing the (or the ENTER - Hitachi CPX1200 | User Manual - Page 44
the suitable mode to the item "VIDEO" of the INPUT menu. Set the time using the / buttons. : Long (max. 99 minutes) Short (min. 0 minute = DISABLE) AUTO POWER OFF ENABLE AUTO POWER OFF DISABLE 1min 0min ex. When the time is set to 1 to 99, the projector lamp will go off and the STANDBY/ON - Hitachi CPX1200 | User Manual - Page 45
, and pressing the VIDEO button selects the COMPONENT port. memo If no signal is found or the projector is unstable to find an input signal at any of its ports, it will return to the state it was in prior to the search. Select the EXECUTE using the button to reset the AUTO menu - Hitachi CPX1200 | User Manual - Page 46
instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT BLANK BLACK START UP ORIGINAL MyScreen MyScreen SIZE x1 MyScreen LOCK TURN OFF MENU POSITION MESSAGE TURN ON RESET Item Description BLANK Select a type of the BLANK screen using - Hitachi CPX1200 | User Manual - Page 47
of the input signal by input change. The indication of the aspect ratio by changing the aspect ratio. The indication of "FOCUS" by adjusting the focus. Select the EXECUTE using the button to reset the SCREEN menu items. : EXECUTE CANCEL The items of the SCREEN menu are collectively returned to the - Hitachi CPX1200 | User Manual - Page 48
can be performed. Perform each operation in accordance with the instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT VOLUME SPEAKER IR REMOTE IR REMOTE ID LAMP TIME FILTER TIME SERVICE RESET 16 TURN ON ALL 1234 h 4321 h Item VOLUME SPEAKER IR - Hitachi CPX1200 | User Manual - Page 49
adjustment of the lens shift, the zoom and the focus. Select the EXECUTE using the button to reset the OPTION menu items. : EXECUTE CANCEL The items of the OPTION menu are collectively returned to the initial setting. Note that the items "VOLUME", "LAMP TIME" and "FILTER TIME" are not reset. 34 - Hitachi CPX1200 | User Manual - Page 50
time. Please see the section "Network Setting Up". MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT SETUP DHCP INFORMATION RESET the projector on the Network. 1. Set the IP Address using the / buttons. memo The same number as the IP Address of other units cannot be used. - Hitachi CPX1200 | User Manual - Page 51
10BASE-1) cable, then set up the projector according to the Network environment in which you use it. When you use a Network unsuitable to the DHCP screen. 4) Make sure of the input data, then click "Write". memo These setting will be active after reboot. These setting will be stored, and used - Hitachi CPX1200 | User Manual - Page 52
the bulb is not broken. • Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that the screws are screwed in firmly. Loose screws could result in damage or injury. • Use only the lamp of the specified type DT00601. • If the lamp breaks soon after the first time it - Hitachi CPX1200 | User Manual - Page 53
the / button, then press the button or ENTER button. (3) Choose the "LAMP TIME" using the / button, then press and hold the RESET button for 3 seconds. (4) Choose the "RESET" using the button. memo When the lamp has been replaced after the message of "THE POWER WILL TURN OFF AFTER 0hr." is displayed - Hitachi CPX1200 | User Manual - Page 54
filter or a new air filter, and replace the filter cover. Hold the release button of the air filter while 5 Turn on the projector power, and reset the filter timer. (1) While the projector running, press the MENU button to TEMP LAMP STANDBY/ON pulling out it. LENS SHIFT BNG COMPONENT S-VIDEO - Hitachi CPX1200 | User Manual - Page 55
2 years. Caring For The Lens 1 Turn off the projector, and unplug the power cord. 2 Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens directly with your hand. Caring For The Cabinet And Remote Control 1 Turn off the projector, and unplug the power cord - Hitachi CPX1200 | User Manual - Page 56
REPLACING LAMP, RESET THE LAMP TIMER. Description The time the lamp timer has counted is approaching 2000 hours. Preparation of a new lamp, and an early lamp change is recommended. After you have change the lamp, please be sure to reset the lamp timer. CHANGE THE LAMP AFTER REPLACING LAMP, RESET - Hitachi CPX1200 | User Manual - Page 57
Troubleshooting (continued) Related Messages (continued) Message Description CLEAN THE AIR FILTER POWER OFF FIRST, THEN CLEAN THE AIR FILTER. AFTER CLEANING THE AIR FILTER, RESET THE FILTER TIMER. The time the filter timer has counted has reached 100 hours. Please clear or change the air filter - Hitachi CPX1200 | User Manual - Page 58
on again. • Is there blockage of the air passage aperture? • Is the air filter dirty? • Does the peripheral temperature exceed 35°C? If the same indication is displayed after the treatment, please change the lamp by referring to the section "Lamp". (This table is continued to the following page - Hitachi CPX1200 | User Manual - Page 59
Blinking in Red It is time to clean the air filter, or there is no air filter. Please immediately turn the power OFF, and clean or change the air filter by referring to the section "Air Filter". After cleaning or changed the lamp, please be sure to reset the filter timer. After the treatment - Hitachi CPX1200 | User Manual - Page 60
Troubleshooting (continued) Phenomena That May Easily Be Mistaken For Machine Defects WARNING • Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. - Hitachi CPX1200 | User Manual - Page 61
approaching the end of its product lifetime. Replace the lamp. 23 23 35, 36 Either the focus and/or horizontal phase settings are not Pictures appear properly. Adjust the focus using the focus buttons, and/or H PHASE using the 16 blurry. menu function. The lens is dirty or misty. Clean the - Hitachi CPX1200 | User Manual - Page 62
are subject to change without notice. Item Product name Liquid crystal panel Panel size Drive system Pixels Lens Lamp Speaker Power supply Power consumption Temperature range Size Weight (mass) Ports Optional Parts Lamp Air filter Others Specification Liquid crystal projector 2.5 cm - Hitachi CPX1200 | User Manual - Page 63
TEMP LAMP STANDBY/ON LENS SHIFT BNG COMPONENT S-VIDEO VIDEO MENU INTER RESET FOCUS ZOOM RGB M1-D INPUT KEYSTONE SEARCH 320 160 Projector CP-X1200/CP-X1250 User's Manual - Operating Guide TECHNICAL Dimensions [unit: mm] 210 73 85.5 (Lens shift 1:1) to 92.99 (Lens shift 10:0) 10:0 1 :1 1 - Hitachi CPX1200 | User Manual - Page 64
NOTE • Be sure to check jack type, signal level, timing and resolution before connecting this projector to a computer. • Some computers may hove multiple display screen modes. Use of some of these modes will not be possible with this projector. • Depending on the input signal, full-size display may - Hitachi CPX1200 | User Manual - Page 65
Signals The following signals are used for the initial settings. The signal timing of some computer models may ×1024 (60Hz) 1280×1024 (75Hz) 1280×1024 (85Hz) 1600×1200 (60Hz) Horizontal signal timing (µs) a b c d 2.0 3.0 20.3 1.0 3.8 1.9 25.4 0.6 2.1 3.2 21.2 2.1 1.3 3.8 20.3 1.0 2.0 3.8 - Hitachi CPX1200 | User Manual - Page 66
To The Ports A RGB B D E AUDIO IN1 AUDIO IN2 M REMOTE CONTROL CONTROL NETWORK RGB ARGB OUT AUDIO OUT CR/PR Ca/Pa Y R/CR/PR G/Y B/CB/PB H V BNC C R-AUDIO IN-L VIDEO S-VIDEO H 54321 09876 ewq=- D-Sub 15 pin shrink jack • Video signal: RGB separate, Analog, 0.7 Vp-p, 75 Ω terminator - Hitachi CPX1200 | User Manual - Page 67
RGB REMOTE CONTROL RGB OUT AUDIO OUT CR/PR Ca/Pa CONTROL Y NETWORK K R/CR/PR G/Y B/CB/PB H V BNC R-AUDIO IN-L VIDEO S-VIDEO I J I VIDEO IN Ground e - N REMOTE CONTROL • 3.5 dia. Stereo mini jack • To be connected with the remote control that came with the projector. O DC OUT 5 - Hitachi CPX1200 | User Manual - Page 68
Connection To The Ports (continued) F G AUDIO IN1 AUDIO IN2 RGB REMOTE CONTROL CONTROL NETWORK RGB OUT AUDIO OUT CR/PR Ca/Pa Y R/CR/PR G/Y B/CB/PB H V BNC R-AUDIO IN-L VIDEO S-VIDEO F RGB OUT Computer side CONTROL port 12345 6789 D-Sub 9 pin plug 54321 9876 D-Sub 9 pin jack - 1 RD 2 - Hitachi CPX1200 | User Manual - Page 69
projector and the computer power supplies. 2 Connect the CONTROL port of the projector with a RS-232C port of the computer by a RS-232C cable. Use GET 4 INCREMENT 5 DECREMENT 6 EXECUTE Content Change setting to desired value. Read projector internal setup value. Increment setup value by 1. - Hitachi CPX1200 | User Manual - Page 70
projector. (2) The projector changes the setting based on the above setting code. (3) The projector returns the response code '06H' to the computer. Using the projector default settings (Reset projector cannot execute the received command. When the projector , the projector ignore the projector receives an - Hitachi CPX1200 | User Manual - Page 71
Get Increment Decrement Execute Get Keystone H Increment Decrement Keystone H Reset Execute Get Brightness Increment Decrement Brightness Reset Execute Get Contrast Increment Decrement Contrast Reset Execute 4:3 Aspect Whisper Mirror 16:9 Set SMALL NORMAL Get NORMAL Set WHISPER - Hitachi CPX1200 | User Manual - Page 72
F4 F0 02 00 A1 30 01 00 02 00 10 00 00 00 Get Custom Gamma Increment Decrement USER Custom Set Color Temp HIGH MIDDLE LOW BE EF BE EF BE EF BE EF BE EF BE 05 00 60 BE EF 03 06 00 83 F6 01 00 B2 30 04 00 70 Set Custom User G 80 BE EF BE EF 03 06 00 B3 F4 01 00 B2 30 03 06 00 23 - Hitachi CPX1200 | User Manual - Page 73
Chart (continued) Names Operation type 50 60 70 Set Custom User B 80 90 100 Get Get Color Balance R Increment Color Balance R Reset Decrement Execute Get Color Balance G Increment Color Balance G Reset Decrement Execute Get Color Balance B Increment Decrement Color Balance - Hitachi CPX1200 | User Manual - Page 74
Decrement Get H Size Increment Decrement H Size Reset Execute Get Over Scan Increment Decrement Over Scan Reset Execute AUTO RGB Color Space Set SMPTE240 REC709 REC601 Get Component COMPONENT Set SCART RGB Get AUTO NTSC PAL Set SECAM Video Format NTSC 4.43 M-PAL N-PAL Get - Hitachi CPX1200 | User Manual - Page 75
Video NR S2-Aspect Auto Adjust Auto off Auto Search Blank Color Blank on/off Startup Menu Position V Menu Position V Reset Menu Position H Menu Position H Reset Message LOW Set MIDDLE HIGH Get TURN OFF Set TURN ON Get Execute Get Increment Decrement TURN OFF Set TURN ON Get My Screen - Hitachi CPX1200 | User Manual - Page 76
Mute TURN ON Set TURN OFF Get Lamp Time Get Lamp Time Reset Execute Filter Time Get Filter Time Reset Execute Get Magnify Increment Decrement Freeze Normal Set Freeze Get TURN OFF Set TURN ON Power Get Input Source M1-D RGB BNC Set Video S-Video Component Get Header BE EF BE - Hitachi CPX1200 | User Manual - Page 77
PinP Position PinP Audio Ch PinP Input Myscreen size Myscreen Lock IR Remote Front IR Remote Rear IR Remote Top Operation type Header Off Set Large Small Get Upper Left Upper Right Set Bottom Left Bottom Right Get RGB Set Video Get Video Set S-Video Get Full Set X1 Get Off Set On Get Off Set - Hitachi CPX1200 | User Manual - Page 78
(continued) Command Data Chart (continued) Names Power Up Source Auto Adjust Enable Internal Speaker Lens Lock Remote ID Auto Power On Lens Operation type Last Ch M1-D RGB Set BNC Component S-Video Video Get DISABLE Set ENABLE Get TURN OFF Set TURN ON Get TURN OFF Set TURN ON
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
 |
 |
Portable LCD Projector