Hitachi DZ GX5020A Owners Guide - Page 130
Message, Cause & Troubleshooting, Reference
UPC - 050585223875
View all Hitachi DZ GX5020A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
English Message Cause & Troubleshooting Cannot combine. Deselect PHOTO scenes. Select only movies and combine them. Cannot combine. Select Select a range of at least 2 scenes to be combined, and then multiple scenes. combine them. Cannot delete scenes. This may occur when scene that was edited for division, etc. is to be deleted. Combine the divided scenes, and then delete them. Cannot divide scene. This message will appear when the scene is extremely short because division, etc. was repeated. Cannot execute. Change display category to ALL. This message will appear if you attempt to combine or move scenes with "Category: VIDEO or PHOTO" specified. Cannot execute. Unselect multiple scenes. Division or change in thumbnail was executed when multiple scenes were selected. Cannot read disc. Check dirt/crack/bothsides contrary/inserted correctly. Error occurred while the disc was being recognized. Make sure that there is no scratch or dirt on disc, that the surface/back of disc is not reversed, and that the disc is firmly pushed against the turntable. See *3 and *4 on page 135. CANNOT RECORD PHOTOS • This message will appear when the PHOTO button is pressed with the power switch set to "O". • You cannot record still image on DVD-RW/DVD-R/+RW disc (recordable of still images from PC). Use DVD-RAM disc to record still images. CANNOT RECORD VIDEO This message will appear when the REC button is pressed with the power switch set to "N" or "P". Cannot replace thumbnail on PHOTO scenes. The thumbnail of a still cannot be changed. Select a movie. Cannot select any more The maximum number of selectable scenes is 999. scenes. CANNOT SLEEP MODE The DVD video camera/recorder can enter the sleep/restart status only from the recording pause status. The following conditions apply: • No disc or card is loaded. • The disc or card has no remaining space. • The power switch is set to "N" with a DVD-RW (VF-mode)/ DVD-R/+RW. CARD ALMOST FULL Remaining space is only enough to record less than 10 stills. Delete unnecessary stills and try the card, or use another card. Card error has occurred. • The card terminals may be dirty: Wipe off dirt, and try the card again, or use another card. • Data other than still image may be included: Use another card. Card error has occurred. Format the card now? Was the card formatted on PC? Was formatting interrupted midway? When using the card on this DVD video camera/ recorder, choose "YES" and format it. Reference page 79 79 77, 79 78 102 73 10, 36 21, 145 40 82 85 41 77, 98, 145 23 97 130