Hitachi DZ GX5020A Owners Guide - Page 141
Press the DISC NAVIGATION button.
UPC - 050585223875
View all Hitachi DZ GX5020A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
English Symptom Cause and Correction Disc cannot be removed. (Cover will not open.) • Did you detach the battery or AC adapter/charger before setting the power switch to "OFF"? Is the battery charged? Connect a charged battery or the AC adapter/charger, and then press the DISC EJECT button to remove the disc. • Did the DVD video camera/recorder turn off because the battery remaining level ran out? Connect a charged battery or the AC adapter/charger, set the power switch to "OFF", and then press the DISC EJECT button to remove the disc. Disc cover cannot be closed. Is disc correctly inserted? Was disc inserted from wrong direction? Remove the disc and then reinsert it. Connect a fully charged battery or AC adapter/charger, and then turn the DVD video camera/recorder on. Operating sound is heard cyclically. This sound is heard because the disc is cyclically operated and does not indicate a fault. Some vibrations are felt These vibrations or sound are caused by disc drive: This does or slight sound is heard not indicate a fault. from mechanism. • No operation can be In the following cases, it will take more time than usual until performed because operation is possible: the ACCESS/PC or • Immediately after a disc or card is reinserted. CARD ACCESS • When a long time has elapsed since the DVD video camera/ indicator on this DVD recorder was turned off last. video camera/ • When the temperature is greatly different from the status of recorder remains lit or previous recording. blinking. • When disc with scratches, dirt or fingerprints is inserted. • After disc or card is • When disc is subject to severe vibrations. inserted, it takes • When the battery or DC power cord was disconnected instead some time until of following the correct procedure using power switch to turn recording is possible. the DVD video camera/recorder off. No image in viewfinder. • Is LCD monitor open? No image will appear in viewfinder unless the LCD monitor is closed and securely locked to DVD video camera/recorder. • Is the DVD video camera/recorder set to the sleep/restart status? Press the SLEEP/RESTART button to release the sleep/restart status. No image appears on the LCD screen or in the viewfinder. • Is DVD video camera/recorder connected to PC using PC connection cable? Unplug the PC connection cable. • Does DVD video camera/recorder stop at the end of the scene to which wipe-out was set and played back? Press the DISC NAVIGATION button. • Is the DVD video camera/recorder set to the sleep/restart status? Press the SLEEP/RESTART button to release the sleep/restart status. Reference page 24, 25, 29 36 24, 26 - - 7, 36 30, 41 41, 80, 113 141