Hitachi ED-A100 User Manual

Hitachi ED-A100 - XGA LCD Projector Manual

Get Hitachi ED-A100 - XGA LCD Projector PDF manuals and user guides
UPC - 050585151338
View all Hitachi ED-A100 manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi ED-A100 manual content summary:

  • Hitachi ED-A100 | User Manual - Page 1
    Projector ED-A100/ED-A110 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read all manuals for this product. Be sure to read "Safety Guide" first. After reading them, store them in a safe place for future reference. About
  • Hitachi ED-A100 | User Manual - Page 2
    keystone distortions . . 22 Troubleshooting 68 Using the magnify feature 22 Related messages 68 Freezing the screen 23 Regarding the indicator lamps . . . . . 69 Temporarily blanking the screen. . . . 23 Shutting the projector down 70 Using the menu function 24 Resetting all settings 70 EASY
  • Hitachi ED-A100 | User Manual - Page 3
    mirror system realizes ultra short distance projection, which gives you more various way of use. ü The motorized lens door offers you very simple use of the projector. ü This projector the contents" section in the User's Manual (concise) which is a book. Your projector should come with the items
  • Hitachi ED-A100 | User Manual - Page 4
    an injury. ►Never look into the projection lens or mirror while the projection lamp lights, since the projection lamp ray may cause a trouble on your eyes. CAUTION ►Do not touch the lamp cover or approach the exhaust vents while using the projector and for a while after use, to prevent a burn. ►Do
  • Hitachi ED-A100 | User Manual - Page 5
    when no menu is displayed (&21), or Cursor ◄, ► buttons when a menu is displayed (&24). (7) MENU buttons when no menu is displayed (&24), or Cursor ▲, ▼ buttons when a menu is displayed (&24). (1) LAMP (2) TEMP (3) POWER STANDBY/ON (4) INPUT (6) MENU FOCUS - (5) (7) + FOCUS Ports (&10
  • Hitachi ED-A100 | User Manual - Page 6
    button (&20) (24) POSITION button (&20, 22, 24) (25) MENU button (&24) (26) Cursor buttons (&24, 25) (27) ENTER button (&24, 25) (28) ESC button (&24, 25) (29) RESET button (&24, 25) (30 RESET (4) (1) (6) (7) (12) (14) (15) (13) (19) (18) (23) (22) (25) (27) (29) (30) Back of the remote control 
  • Hitachi ED-A100 | User Manual - Page 7
    and the screen. • When installing the projector, check that the remote sensors are not exposed to any strong ray (14). CAUTION ►The designated optional accessory for the tabletop use contains the tabletop use feet and mirror protector. Please see the manual enclosed with the accessory. • The
  • Hitachi ED-A100 | User Manual - Page 8
    38.3 15 50 2.0 1 39.8 16 60 9.6 4 47.4 19 70 17.2 7 55.0 22 80 24.8 10 62.6 25 90 32.4 13 70.2 28 100 39.9 16 77.7 31 120 55.0 22 92.8 be shifted after installation if the projector is suspended on a ceiling or somewhere, since the body of this projector is made of plastics. If
  • Hitachi ED-A100 | User Manual - Page 9
    such as walls. • Do not place the projector on metallic thing or anything weak in heat. • Do not place the projector on carpet, cushions or bedding. • Do not place the projector in direct sunlight or near hot objects such as heaters. • Do not place anything near the lens door, lens, mirror, vents
  • Hitachi ED-A100 | User Manual - Page 10
    cable cover (13). PCs USB-A RS-232C RGB OUT AUDIO OUT RGB OUT AUDIO OUT LAN Monitor RGB IN MONITOR OUT COMPUTER IN2 COMPUTER IN1 LAN 1 or disconnect the projector with devices while they are connected to a power supply, except for the cases directed by the manuals. ►Be careful
  • Hitachi ED-A100 | User Manual - Page 11
    with screws. • When connecting a laptop PC to the projector, be sure to activate the PC's external RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the instruction manual of the corresponding laptop PC. • When the
  • Hitachi ED-A100 | User Manual - Page 12
    power cord. Then follow the procedure below for connection. 1. Insert the end of the power cord with the socket into the AC inlet of the projector. 2. Plug the other end of the power cord into a power outlet. AC Inlet Power cord (with the socket) WARNING ►Be careful of operation for a power
  • Hitachi ED-A100 | User Manual - Page 13
    Using the security bar and slot This projector has the security bar for a commercial anti-theft chain or wire up to 10 mm in diameter, and also the security slot for the Kensington lock. For details, see the manual of the security tool. NOTE • These are not provided as comprehensive theft
  • Hitachi ED-A100 | User Manual - Page 14
    HITACHI MAXELL, part number LR6 or R6P. Follow the following procedure. 1. Remove the battery cover in the back of the remote remote sensors from being hit by a strong ray. It may cause malfunction of the projector and remote control. Remote in the battery holder, replace the batteries after wiping
  • Hitachi ED-A100 | User Manual - Page 15
    REMOTE FREQ. in the SERVICE item of ENTER the OPTION Menu (46) of the projector to be controlled should be ESC RESET set to the same mode as the remote sure to check your PC's manuals before connecting this product to projector is working properly. This function is not available while the lamp
  • Hitachi ED-A100 | User Manual - Page 16
    wait to use the control buttons (on the projector and remote control). The buttons may not work soon. LAMP TEMP POWER STANDBY/ON INPUT 2. Confirm that or mirror while the projection lamp lights, since the projection lamp ray may cause a trouble on your eyes. ►Do not touch around the lamp cover and
  • Hitachi ED-A100 | User Manual - Page 17
    mentioned in the manuals. For this projector, follow the procedure below. 1. Press the STANDBY/ON button (on the projector or remote control). The LAMP TEMP POWER STANDBY/ON INPUT ● For cooling the projector down, wait for the POWER indicator to stop blinking and turn steady orange. The projector
  • Hitachi ED-A100 | User Manual - Page 18
    ). ENTER ESC RESET Temporarily muting the sound 1. Press MUTE button on the remote control. A dialog Menu and the input signal from the port supports the C.C. feature (60). Selecting an input signal button on the remote control. Each time you press the button, the projector switches its input
  • Hitachi ED-A100 | User Manual - Page 19
    VIDEO button is pushed when COMPUTER IN1 or COMPUTER IN2 port is selEeNTERcted, the projector will check COMPONENT port first. ESC RESET Searching an input signal 1. Press SEARCH button on the remote control. The projector will start to check its input ports as below in order to find any input
  • Hitachi ED-A100 | User Manual - Page 20
    off from the projector, and result in an injury. ►Tilt the projector with these elevating feet only. ►Do not tilt the projector over 5 degrees, + POSITION MENU ENTER ESC RESET D-ZOOM - button Adjusting the picture position Press the POSITION button on the remote control while no menu is on
  • Hitachi ED-A100 | User Manual - Page 21
    FOCUS + or FOCUS - button on the remote control, or FOCUS + or FOCUS - button on the projector while no menu is on screen, to ENTER  F or a video signal and s-video signal ESC RESET The video format best suited for the respective input signal will be SERVICE item in the OPTION Menu (45). 21
  • Hitachi ED-A100 | User Manual - Page 22
    one of computer signal can be zoomed in up to 4 times. ESC RESET To move the zoom area, press the POSITION button in the MAGNIFY mode, screen to normal, press the OFF button of MAGNIFY on the remote control. ● The projector automatically exits from the MAGNIFY mode when the input signal is
  • Hitachi ED-A100 | User Manual - Page 23
    MENU ENTER ● The projector automatically exits from the FREEZE mode when oneESC of the RESET projector's buttons or remote control buttons of STANDBY/ If the projector continues projecting a still image for a long time, the LCD panel might possibly be burned in. Do not leave the projector in the
  • Hitachi ED-A100 | User Manual - Page 24
    these menus are as follows. END PAGE DOWN MUTE OFF MENU button LAMP TEMP POWER STANDBY/ON FREEZE MY BUTTON KEYSTONE 1 2 ENTER button button RESET RESET button 2 - D-ZOOM + KEYSTONE MENU RESET ENTER POSITION ESC 1. Press the MENU button on the remote control or the projector. The
  • Hitachi ED-A100 | User Manual - Page 25
    is selected, or when a certain input signal is displayed. ● When you want to reset the operation, press RESET button on the remote control during the operation. Note that some items (ex. LANGUAGE, H PHASE, VOLUME) cannot be reset. ● In the Advanced Menu, when you want to return to the previous
  • Hitachi ED-A100 | User Manual - Page 26
    EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item ASPECT D-ZOOM KEYSTONE Description Using the ◄/► buttons switches the mode for aspect ratio. See the ASPECT
  • Hitachi ED-A100 | User Manual - Page 27
    switches the mode for mirror status. See MIRROR item in SETUP Menu (36). Performing this item resets all of EASY MENU items except FILTER TIME and LANGUAGE. Pressing the RESET button or the ► button displays a dialog. To reset, select RESET using the ▲ button performs resetting. The usage time of
  • Hitachi ED-A100 | User Manual - Page 28
    PICTURE Menu PICTURE Menu From the PICTURE Menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item BRIGHTNESS Description Using the
  • Hitachi ED-A100 | User Manual - Page 29
    PICTURE Menu PICTURE Menu (continued) Item Description Using the ▲/▼ buttons switches the color temperature mode. #1 HIGH DEFAULT � #1 HIGH CUSTOM � #2 MID DEFAULT � � #6 Hi-BRIGHT-3 CUSTOM #2 MID CUSTOM � � #6 Hi-BRIGHT-3 DEFAULT #3 LOW DEFAULT � � #5 Hi-BRIGHT-2 CUSTOM #3 LOW
  • Hitachi ED-A100 | User Manual - Page 30
    ó Weak • There may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. This projector has 4 memories for adjustment data (for all the items of PICTURE Menu). Selecting a function using the ▲/▼ buttons and pressing the ► or ENTER button
  • Hitachi ED-A100 | User Manual - Page 31
    the vertical position may cause noise to appear on the screen. If this occurs please reset the vertical position to the default setting. Pressing RESET button when V POSITION is selected will reset V POSITION to the default setting. • When this function is performed on a video signal, s-video signal
  • Hitachi ED-A100 | User Manual - Page 32
    the picture may not be displayed correctly. In such a case, please reset the adjustment by pressing the RESET button during this operation. Executing this item performs the automatic adjustment feature. FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION Menu (45).
  • Hitachi ED-A100 | User Manual - Page 33
    of the COMPONENT (Y, CB/PB, CR/PR) port. COMPONENT ó SCART RGB When the SCART RGB is selected, COMPONENT (Y, CB/PB, CR/ PR) and VIDEO ports will function as a SCART RGB port. A SCART cable is required for a SCART RGB input to the projector. For your reference, see the TECHNICAL part. (continued on
  • Hitachi ED-A100 | User Manual - Page 34
    INPUT Menu INPUT Menu (continued) Item Description VIDEO FORMAT The video format for S-VIDEO port and VIDEO port can be set. (1) Use the ◄/► buttons to select the input port. (2) U sing the ▲/▼ buttons switches the mode for video format. AUTO ó NTSC ó PAL ó SECAM N-PAL ó M-PAL ó NTSC4.43 •
  • Hitachi ED-A100 | User Manual - Page 35
    INPUT Menu INPUT Menu (continued) Item RESOLUTION Description The resolution for the COMPUTER IN1 and IN2 input signals can be set on this projector. (1) In the INPUT Menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. (2) In the
  • Hitachi ED-A100 | User Manual - Page 36
    reduced. Using the ▲/▼ buttons switches the mode for mirror status. MIRROR NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (51) will be displayed when projector is restarted after the power switch is turned
  • Hitachi ED-A100 | User Manual - Page 37
    C.C.(Closed Caption) is automatically activated, if the C.C. is set to AUTO in the DISPLAY menu of the C.C. Menu and the signal from the input port supports the C.C. feature (60). 37
  • Hitachi ED-A100 | User Manual - Page 38
    NEDERLANDS � � SUOMI PORTUGUÊS � � SVENSKA Using the buttons adjusts the menu position. MENU POSITION To quit the operation, press MENU button on the remote control or keep no operation for about 10 seconds. Using the ▲/▼ buttons switches the mode for the BLANK screen. The BLANK screen
  • Hitachi ED-A100 | User Manual - Page 39
    SCREEN Menu (continued) SCREEN Menu Item Description Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF START UP MyScreen ORIGINAL TURN OFF Feature Screen
  • Hitachi ED-A100 | User Manual - Page 40
    freeze and the frame for capturing will appear. To stop performing, press the RESET or ESC button. 2. U sing the buttons adjusts the frame position. Please the registration failed, the following message is displayed: "A capturing error has occurred. Please try again." • This function cannot be
  • Hitachi ED-A100 | User Manual - Page 41
    without any messages, which is not a malfunction (23). Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN buttons and the ENTER or INPUT button to select and enter characters. The RESET button can be used to erase 1 character at a time. Also if
  • Hitachi ED-A100 | User Manual - Page 42
    or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table. Item AUTO started from the current port. Then when an input is found, the projector will stop searching and display the image. COMPUTER IN1  COMPUTER IN2 VIDEO
  • Hitachi ED-A100 | User Manual - Page 43
    a dialog. To reset the lamp time, select RESET using the ▲ button. RESET ï CANCEL • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp. • For the lamp replacement, see the section "Replacing the lamp" (61). FILTER TIME The filter time is the
  • Hitachi ED-A100 | User Manual - Page 44
    item displays the SERVICE menu. Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button to execute the item. FAN SPEED  AUTO ADJUST  GHOST  FILTER MESSAGE  KEY LOCK  FOCUS LOCK (continued on next page) FACTORY RESET  I NFORMATION  REMOTE FREQ.  REMOTE RECEIV. 44
  • Hitachi ED-A100 | User Manual - Page 45
    at highlands etc. Note that the projector is noisier when the HIGH is selected manually. SERVICE (continued) GHOST 1. Select a color element of ghost using the ◄/► buttons. 2. Adjust the selected element using the ▲/▼ buttons to disappear ghost. FILTER MESSAGE Use the ▲/▼ button to set the timer
  • Hitachi ED-A100 | User Manual - Page 46
    Selecting RESET using the button ▲ performs this function. By this function, all the items in all of menus will collectively return to the initial setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE, SECURITY and NETWORK settings are not reset. RESET ï CANCEL 46 (continued on next page
  • Hitachi ED-A100 | User Manual - Page 47
    OPTION Menu OPTION Menu (continued) Item SECURITY Description This projector is equipped with security functions. User registration is required before using the security functions. Please contact your local dealer. 1. Using Security Features 1.1 Inputting the PASSWORD 1.1-1 Use the ▲/▼ buttons
  • Hitachi ED-A100 | User Manual - Page 48
    box is displayed, press and hold the RESET button for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds. The 10-digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. SECURITY (continued) 2. Using the
  • Hitachi ED-A100 | User Manual - Page 49
    dealer with the 10-digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. 3. Using the PIN LOCK Function PIN LOCK is a function which prevents the projector from being used unless a registered Code is input. 3.1 Registering the PIN Code 3.1-1 Use
  • Hitachi ED-A100 | User Manual - Page 50
    times, the projector will be shut down. 3.3 If you have forgotten your PIN Code 3.3-1 While the PIN BOX is displayed, press and hold the RESET button for 3 projector will turn off. 3.3-2 Contact your dealer with the 10-digit Inquiring Code. Your PASSWORD will be sent after your user registration
  • Hitachi ED-A100 | User Manual - Page 51
    projector (normal use or ceiling mounted or tabletop use) or mirror setting is changed from previous record, the Transition Detector alarm will be displayed and the projector for about 5 minutes the lamp will turn off. This function will activate only when the projector is started after turning off
  • Hitachi ED-A100 | User Manual - Page 52
    -digit Inquiring Code will be displayed inside the box. 4.4-3 Contact your dealer with the 10-digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. (continued on next page) 52
  • Hitachi ED-A100 | User Manual - Page 53
    or INPUT button to select and enter characters. The RESET button can be used to erase 1 character at erased. The MY TEXT can be input up to 24 characters on each line. (3) To change an already the INPUT-INFORMATION- when the INFORMATION on the SERVICE menu is chosen. • This function is available
  • Hitachi ED-A100 | User Manual - Page 54
    the PASSWORD during this time. NOTE PASSWORD BOX Pressing the ENTER button on the remote control or INPUT button on the projector will return to the MY TEXT PASSWORD on/off menu. When the PASSWORD is code. Your PASSWORD will be sent after your user registration information is confirmed. 54
  • Hitachi ED-A100 | User Manual - Page 55
    settings on this projector may cause trouble on the network projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. See the User's Manual - Network Guide
  • Hitachi ED-A100 | User Manual - Page 56
    Use the buttons to enter the Year (last two digits), Month, Date, Hour and Minute. • The projector will override this setting and retrieve DATE AND TIME information from the Time server when SNTP is enabled. ( Date/Time Settings of the User's Manual - Network Guide) (continued on next page) 56
  • Hitachi ED-A100 | User Manual - Page 57
    and press the ► button. The PROJECTOR NAME dialog will be displayed. (2) The current PROJECTOR NAME will be displayed on the first 3 lines. If not yet written, the lines will be blank. Use the buttons and the ENTER or INPUT button to select and enter characters. The RESET button can be used to
  • Hitachi ED-A100 | User Manual - Page 58
    . The application software "PJTransfer" is required to store image(s) into the projector. Use the ▲/▼ buttons to select an item which is a still image by the e-SHOT ( e-SHOT (Still Image Transfer) Display of the User' s Manual - Network Guide) and the ► or ENTER button to display the image. • The
  • Hitachi ED-A100 | User Manual - Page 59
    Replace the battery suitably (65). • IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate "0.0.0.0" when DHCP is ON and the projector has not gotten address from DHCP server. Executing this item restarts and initializes the network functions. Choose the RESTART using the button ►. SERVICE
  • Hitachi ED-A100 | User Manual - Page 60
    to have NTSC format video or 525i(480i) Component video source supporting C.C. feature to utilize this function. Item Description Select Closed Caption which is for additional information such as news reports or a TV program guide. The information covers the entire screen. Not all of the C.C.
  • Hitachi ED-A100 | User Manual - Page 61
    cord from the power outlet. And cool the projector down by leaving it for about 45 minutes as it is. When the projector is mounted on a ceiling or somewhere over your head, or when the lamp may have been broken, be sure to refer replacement to your dealer or service person, since it may be dangerous
  • Hitachi ED-A100 | User Manual - Page 62
    In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken. • Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that the screws are screwed in firmly. Loose screws could result in damage or
  • Hitachi ED-A100 | User Manual - Page 63
    place. 7. Plug in and restart the projector (12, 16). Then, reset the filter time (which is the time counter for the air-filter use). (1) Press the ▲ or ▼ button on the projector or the MENU button on the remote control. The "EASY MENU" appears. (2) Point at the "FILTER TIME" in the menu using the
  • Hitachi ED-A100 | User Manual - Page 64
    type will come with the replacement lamp for this projector. Replacing the filter unit at the same time with the lamp is recommended. • Please reset the filter time only when you have cleaned the air-filter, for a suitable indication about the air-filter. • The projector may display the message such
  • Hitachi ED-A100 | User Manual - Page 65
    replacement of the battery: HITACHI MAXELL, part number CR2032. 1. Turn the projector off and unplug the power cord from the power outlet. And cool the projector by removing the battery. For setting the clock, see the User's Manual - Network Guide. WARNING ►Be careful of handling a battery, as a
  • Hitachi ED-A100 | User Manual - Page 66
    L AUDIO IN3 Blower NOTE • When the lens door is closed manually, it may not shut properly. WARNING ►Before caring for the projection mirror and lens, turn the projector off and unplug the power cord, then cool the projector sufficiently. ►Do not use a vacuum cleaner to clean the projection
  • Hitachi ED-A100 | User Manual - Page 67
    by your dealer about once every year. Caring for the cabinet and remote control Incorrect care could have adverse influence such as discoloration, peeling paint, etc. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the
  • Hitachi ED-A100 | User Manual - Page 68
    service company. Otherwise if a problem occurs with the projector filter. Please immediately turn the power off, and clean or change the air-filter referring to the "Maintaining the air-filter" section of this manual. After you have cleaned or changed the airfilter, please be sure to reset the filter
  • Hitachi ED-A100 | User Manual - Page 69
    Troubleshooting Regarding the indicator lamps When operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER LAMP TEMP indicator indicator indicator Description Lighting Turned Turned The projector is in a standby state.
  • Hitachi ED-A100 | User Manual - Page 70
    minutes to make the projector cool down enough. Shutdown switch MONITOR OUT Resetting all settings When it is hard to correct some wrong settings, the FACTORY RESET function of SERVICE item in OPTION Menu (46) can reset all settings(except LANGUAGE, FILTER TIME, LAMP TIME, FILTER MESSAGE, NETWORK
  • Hitachi ED-A100 | User Manual - Page 71
    Troubleshooting Phenomena that may be easy to be mistaken for machine defects About the the power plug from the power outlet, and allow the projector to cool down at least 10 minutes, then turn the power on again. Either there is no lamp and/or lamp cover, or either of these has not been properly
  • Hitachi ED-A100 | User Manual - Page 72
    Troubleshooting Restore the sound pressing MUTE or VOLUME button on 18 Sound does not the remote control. come out. The volume is adjusted to an extremely low level. in SETUP Menu. 37 The lens door is not fully opened. Turn the projector off, and then turn it on again to make sure that the door
  • Hitachi ED-A100 | User Manual - Page 73
    Troubleshooting SPACE setting to AUTO, RGB, SMPTE240, REC709 or Replace the lamp. Either the focus and/or horizontal phase settings are not properly adjusted. Adjust the focus using the focus ring, and/or H PHASE using the menu function. The lens or mirror is dirty or misty. Clean the lens or mirror
  • Hitachi ED-A100 | User Manual - Page 74
    projector Liquid Crystal Panel Panel size 1.6 cm (0.63 type) Drive system TFT active matrix Pixels 786,432 pixels (1024 horizontal x 768 vertical) Lens F=2.1 f=5.1 mm Lamp USB USB-B x 1 LAN RJ45 x 1 Optional parts Lamp: DT00891 Filter unit: QD60122 Tabletop use kit: TT100 Soft case: CA100
  • Hitachi ED-A100 | User Manual - Page 75
    Specifications (continued) Specifications 366 356 378 397 225 113 131 139 [unit: mm] 75
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
±
Projector
ED-A100
/
ED-A110
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this
product. Be sure to read “Safety Guide” first. After reading them, store them in a
safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
• Mac is registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
All other trademarks are the properties of their respective owners.
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.