Hitachi ED-A100 Network Guide
Hitachi ED-A100 - XGA LCD Projector Manual
 |
UPC - 050585151338
View all Hitachi ED-A100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi ED-A100 manual content summary:
- Hitachi ED-A100 | Network Guide - Page 1
Projector ED-A100/ED-A110 User's Manual (detailed) Network Guide Thank you for purchasing this projector. This projector has the network function that brings you the following main features. ü W eb control The projector can be controlled and monitored by a web browser software on your PC, which can - Hitachi ED-A100 | Network Guide - Page 2
Required equipment preparation 4 2.2 Manual network connection setting 5 2.2.1 Equipments connection 5 2.2.2 Network settings 5 2.2.3 "Internet Option" setting 8 2.2.4 Check connection 9 3. Management with Web browser software 10 3.1 Configuring and controlling the projector via a web browser - Hitachi ED-A100 | Network Guide - Page 3
and controlling via a web browser You can adjust or control the projector via a network from a web browser on a PC that is the web browser and it offers the menus to configure the network settings, monitor the projector and so on. 1.2 e-SHOT (Still image Transfer) Display Image files can be sent - Hitachi ED-A100 | Network Guide - Page 4
connection and network setting 2. Equipment connection and network setting 2.1 Required equipment preparation The following equipments are required to connect the projector to your PC through the network. PC : 1) equipped with the network feature 2) installed a web browser software (&11) LAN cable - Hitachi ED-A100 | Network Guide - Page 5
2. Equipment connection and network setting 2.2 Manual network connection setting 2.2.1 Equipments connection Connect the projector and PC with a LAN cable. * Before connecting with an existing network, contact the network administrator. Next, please check the PC setting as explained below. 2.2.2 - Hitachi ED-A100 | Network Guide - Page 6
2. Equipment connection and network setting 2.2 Manual network connection setting (continued) 5) Open "Local Area Connection Properties" window you use for network device. (Fig. 2.2.2.c) Fig. 2.2.2.c "Local Area Connection Properties" window 6) Set used protocol - Hitachi ED-A100 | Network Guide - Page 7
2. Equipment connection and network setting 2.2 Manual network connection setting (continued) [About IP address] ■ Setting manually The Network address portion included in the IP address set into your PC should be common with projector's one. And the entire IP address in the PC should not be - Hitachi ED-A100 | Network Guide - Page 8
2. Equipment connection and network setting 2.2 Manual network connection setting (continued) 2.2.3 "Internet Option" setting 1) Click "Internet Options" in "Network and Internet Connections" window (Fig. 2.2.3.a) to open "Internet Properties" window. (Fig.2.2.3.b) Click Fig. 2.2.3.a " - Hitachi ED-A100 | Network Guide - Page 9
connection and network setting 2.2 Manual network connection setting (continued) Fig. 2.2.3.c "Local Area Network (LAN) Settings" window 3) Uncheck all boxes in "Local Area Network (LAN) Settings" window. (Fig. 2.2.3.c) 2.2.4 Check connection Check PC and projector are connected properly here. If - Hitachi ED-A100 | Network Guide - Page 10
requires maintenance or has encountered an error. (32) Projector Management using SNMP This projector is SNMP (Simple Network Management Protocol) compliant, allowing you to monitor it from a remote location using SNMP software. In addition, the projector is able to send failure & warning alerts - Hitachi ED-A100 | Network Guide - Page 11
. You can't communicate the projector using SSL on Windows Vista. • It is recommended that all web browser updates are installed. It is especially recommended that all users running Internet Explorer on a Microsoft Windows version prior to Windows XP Service Pack 2 install security update Q832894 - Hitachi ED-A100 | Network Guide - Page 12
required. There are two types of IDs, Administrator ID and User ID. The following chart describes the differences between Administrator and User IDs. Item Description Network Information Displays the projector's current network configuration settings. Network Settings Displays and configures - Hitachi ED-A100 | Network Guide - Page 13
the following for configuring or controlling the projector via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: Fig. 3.1.1 b "Logon with Administrator ID" Fig. 3.1.1 c "Logon with User ID" 3) Click the desired operation or configuration item on the main menu - Hitachi ED-A100 | Network Guide - Page 14
All screen drawings in this manual are shown when you logon with the Administrator ID. Any functions that are available only for the Administrator will not be shown when you logon with the User ID. Refer to the table. (13) Displays the projector's current network configuration settings. Item - Hitachi ED-A100 | Network Guide - Page 15
Configures the subnet mask when DHCP is disabled. Configures the default gateway when DHCP is disabled. Configures the name of the projector. The length of the Projector Name can be up to 64 alphanumeric characters. Only alphabets, numbers and following symbols can be used and space Configures the - Hitachi ED-A100 | Network Guide - Page 16
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) NOTE • The new configuration Restart] on the main menu. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. 16 - Hitachi ED-A100 | Network Guide - Page 17
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.4 Port Settings Displays and configures communication port settings. Item Network Control Port1 (Port:23) Port open Authentication Network Control Port2 (Port: - Hitachi ED-A100 | Network Guide - Page 18
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.5 Mail Settings Displays and [Send Test Mail]. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. 18 - Hitachi ED-A100 | Network Guide - Page 19
Execution Error Schedule Execution error. (21) Lamp Time Alarm Lamp time over Alarm Time setting. Filter Time Alarm Filter time over Alarm Time setting. Transition Detector Alarm Transition Detector Alarm. (OPTION Menu in the User's Manual (detailed) - Operating Guide) "CHANGE THE LAMP" is - Hitachi ED-A100 | Network Guide - Page 20
projector screen. The e-mail will be sent when the filter timer exceeds 50, 100, 200, 300, 400, 500, 600, 700 or 800 hours based on the configuration. No notification e-mail will be sent if the FILTER MESSAGE is set to TURN OFF. (OPTION Menu in the User's Manual (detailed) - Operating Guide) • Lamp - Hitachi ED-A100 | Network Guide - Page 21
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.7 Schedule Settings Displays and configures schedule settings. Item Daily Sunday Monday Tuesday Wednesday Thursday Friday Saturday Specific date No.1 Specific date - Hitachi ED-A100 | Network Guide - Page 22
List. Click [Delete] button to delete commands from the Schedule List. Click [Reset] button to delete all commands from the Schedule List. NOTE • After the projector is moved, check the date and time set for the projector before configuring the schedules. Strong shock may make the date and time - Hitachi ED-A100 | Network Guide - Page 23
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.8 Date/Time Settings Displays and configures the date and time settings. Item Current Date Current Time Daylight Savings Time Start Month - Hitachi ED-A100 | Network Guide - Page 24
Configuring and controlling the projector via a web browser on the main menu. • If you connect the projector to an existing network, consult a network administrator before function, the time difference must be set. • The projector will retrieve Date and Time information from the time server - Hitachi ED-A100 | Network Guide - Page 25
and controlling the projector via a web browser (continued) 3.1.9 Security Settings Displays and configures passwords and other security settings. Item Administrator authority Administrator ID Administrator Password Re-enter Administrator Password User authority User ID User Password Re-enter - Hitachi ED-A100 | Network Guide - Page 26
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) Item Network Control Authentication Password Re-enter Authentication Password SNMP Community name Description Configures the Authentication password for the command control. - Hitachi ED-A100 | Network Guide - Page 27
for details. NOTE • The setting value may not match with the actual value if the user changes the value manually. In that case, please refresh the page by clicking [Refresh] button. Controls the projector. Item Main Power Input Source Picture Mode Blank On/Off Mute Freeze Magnify Focus Picture - Hitachi ED-A100 | Network Guide - Page 28
Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) Item Image Aspect Over Adjusts the vertical keystone distortion setting. Selects the whisper mode. Selects the mirror status. Adjusts the volume setting. Turns the built-in speaker on/ - Hitachi ED-A100 | Network Guide - Page 29
off. Auto on Turns the auto on function on/off. Auto off Configures the timer to shut off the projector when no signal is detected. My Button-1 Assigns the functions for the MY BUTTON1 buttons on the included remote control. My Button-2 Assigns the functions for the MY BUTTON2 buttons on the - Hitachi ED-A100 | Network Guide - Page 30
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.11 Projector Status Displays and configures the current projector status. Item Error Status Lamp Time Filter Time Power Status Input Status Blank On/Off Mute Freeze Description - Hitachi ED-A100 | Network Guide - Page 31
in order to activate new configuration settings. NOTE • Restarting requires you to re-log on in order to further control or configure the projector via a web browser. Wait 1 minute or more after clicking [Restart] button to log on again. • The Logon menu (13) is displayed after restarting - Hitachi ED-A100 | Network Guide - Page 32
condition that is requiring maintenance or detected an error. NOTE • Up to five e-mail addresses can be specified. • The projector may be not able to send e-mail if the projector suddenly loses power. Mail Settings (18) To use the projector's e-mail alert function, please configure the following - Hitachi ED-A100 | Network Guide - Page 33
] button to save the settings. Failure/Warning e-mails are formatted as follows: Subject line : Text : Date Time IP Address MAC Address - Hitachi ED-A100 | Network Guide - Page 34
. NOTE • It is recommended that SNMP functions be carried out by a network administrator. • SNMP management software must be installed on the computer to monitor the projector via SNMP. SNMP Settings (17) Configure the following items via a web browser to use SNMP. Example: If the IP address of the - Hitachi ED-A100 | Network Guide - Page 35
software 3.4 Event Scheduling The scheduling function enables to setup scheduled events including power on / power off. It enables to be "self-management" projector. NOTE • You can schedule the following control events: Power ON/OFF, Input Source and Transferred Image Display. • The power on / off - Hitachi ED-A100 | Network Guide - Page 36
for approx. 3 seconds when at least 1 "Power ON" schedule is saved. • When the schedule function is used, the power cord must be connected to the projector and the outlet and the power switch must be turned on, [ | ]. The schedule function does not work when the power switch is turned off, [O] or - Hitachi ED-A100 | Network Guide - Page 37
can be adjusted via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the been set correctly. Replace the battery by following the instructions on replacing the battery. (Internal clock battery in the User's Manual (concise)) • - Hitachi ED-A100 | Network Guide - Page 38
Refer to the manual for the application for instructions. To display the transferred image, select the e-SHOT item in the NETWORK Menu. For more information, please see the description of the e-SHOT item of the NETWORK Menu. ( NETWORK Menu in User's Manual (detailed) - Operating Guide) NOTE • It is - Hitachi ED-A100 | Network Guide - Page 39
e -SHOT (Still Image Transfer) Display (continued) Configure the following items from a web browser when e-SHOT is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) E nter the Administrator ID and - Hitachi ED-A100 | Network Guide - Page 40
function. Command Control Settings (17) Configure the following items from a web browser when command control is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter the Administrator ID and - Hitachi ED-A100 | Network Guide - Page 41
3. Management with Web browser software 3.6 Command Control via the Network (continued) When the authentication setting is enabled, the following settings are required. (25) 7) Click [Security Settings] on the main menu. 8) Click [Network Control] and enter the desired authentication password. * - Hitachi ED-A100 | Network Guide - Page 42
reply will be sent back in the event of authentication failure when authentication is enabled. Reply 0x1F Error code 0x04 0x00 ● TCP #9715 Send Data format The following formatting is added to the header (0x02), Data length (0x0D), Checksum - Hitachi ED-A100 | Network Guide - Page 43
ID 1 byte Connection ID 1 byte Reply 0x1C Error code 2 bytes Reply Data 0x1D 2 bytes Reply Status code 0x1F 2 bytes Reply 0x1F Authentication Error code 0x04 0x00 Connection ID 1 byte Connection ID 1 byte Connection - Hitachi ED-A100 | Network Guide - Page 44
8 bytes are "a572f60c". 1) Select the projector. 2) Receive the random 8 bytes "a572f60c" from the projector. 3) Bind the random 8 bytes "a572f60c be performed and the reply data will be returned. Otherwise, an authentication error will be returned. NOTE • As for the transmission of the second or
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
 |
 |
±
Projector
ED-A100
/
ED-A110
User's Manual (detailed)
Network Guide
Thank you for purchasing this projector.
This projector has the network function that brings you the following main features.
►Before using this product, be sure to read all manuals for this
product.
After reading them, store them in a safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
• Windows is a registered trademark of Microsoft Corporation.
All other trademarks are the properties of their respective owners.
ü
Web control
The projector can be controlled and monitored by a web browser software on
your PC, which can help you to setup and maintain the projector.
ü
e-SHOT (Still Image Transfer) Display
The projector can display still images that are transferred via the network.
This manual is only intended to explain Network function only.
For safety, operations or any other issues, refer to the Safety Guide and User’s
Manual (concise and detailed).