Home » Hitachi Manuals » Flat Panel Televisions » Hitachi UT32A302 » Manual Viewer

Hitachi UT32A302 Owners Guide

Hitachi UT32A302 - LCD Direct View TV Manual

View all Hitachi UT32A302 manuals

Add to My Manuals
Save this manual to your list of manuals

Hitachi UT32A302 manual content summary:

Hitachi UT32A302 | Owners Guide - Page 1
Hitachi UltraVision® HDTV Monitor 1.5™ UltraThin LCD HDTV Monitor 32" Class (31.51" Diagonal) Anthracite Pearl Crystal Frame(UT32A302) White Pearl Metallic Crystal Frame(UT32A302W) 1366 x 768p, PictureMaster™ V (1) HDMI™ (V.1.3 with CEC) Input; (1) RGB D-sub15 Input with Audio Operating Guide Model
Hitachi UT32A302 | Owners Guide - Page 2
Wall Mount Setup 11 Floor Stand Setup 12 QUICK START GUIDE 13 1. Supplied Accessories (including option 13 2. Connection 13 3. Insert the Batteries into the Remote Control 42 When RGB Input is Selected 42 TROUBLESHOOTING 43 About LCD Display Technology 43 When the Following Messages
Hitachi UT32A302 | Owners Guide - Page 3
INSTRUCTIONS SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HITACHI LCD MONITOR Our reputation has been built on the quality, performance, and ease of service of Hitachi LCD Monitors and/or personal injury. 16. Follow instructions for wall, shelf or ceiling mounting as recommended by the manufacturer. 17.
Hitachi UT32A302 | Owners Guide - Page 4
occur during installation or operation of the product, before calling for technical support or service technicians, please read "TROUBLESHOOTING" ( 43 ~ 45 ) to determine the symptoms. If serious problems occur (such as smoke or an abnormal odor from the unit), turn off the main power, unplug
Hitachi UT32A302 | Owners Guide - Page 5
otherwise reverse-engineer the software installed in this product. Features Hitachi® UltraVision® 32" HDTV Monitor 1.5" UltraThin Liquid Crystal Display Anthracite Pearl Crystal Frame(UT32A302) White Pearl Metallic Crystal Frame(UT32A302W) Wide Viewing Angle IPS (In-Plane Switching) Technology High
Hitachi UT32A302 | Owners Guide - Page 6
manual and affixed to the unit itself. Please fully understand the meanings of the symbols before reading the instructions in this section. WARNING CAUTION Never ignore the instruction injury. ■ If serious problems occur, unplug the power cord immediately. Serious problems such as: Smoke, abnormal
Hitachi UT32A302 | Owners Guide - Page 7
. Therefore do not press the panel surface with your fingers or hands. Also do not hit any objects against the monitor. These actions would damage the LCD cells or the panel surface and could cause failure or personal injury. In the event that you drop the unit or the cabinet is damaged
Hitachi UT32A302 | Owners Guide - Page 8
service lifetime. Install the product in accordance with the instructions in this manual television near the speakers of the LCD Monitor. This could cause wall socket. This could cause electric shock. If the plug is not suitable for the wall product for long periods of time. ■ Handle the batteries
Hitachi UT32A302 | Owners Guide - Page 9
an appropriate level, especially during night time. ■ Transporting the product When the upright; otherwise this could damage the LCD panel. Avoid laying the product down on at the end of its service lifetime, follow the regulations in ) to clean the cabinet and control panel of the unit. In case
Hitachi UT32A302 | Owners Guide - Page 10
no responsibility nor liability for personal injuries or property damage caused by use of other mounting units or improper installation. With respect to installation instructions, please read each user manual for the respective mounting units: for Desktop Setup, Floor Stand Setup, Wall Mounting
Hitachi UT32A302 | Owners Guide - Page 11
been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL). • Follow all instructions supplied by the display and wall mount manufacturers. • If you have any doubts about your ability to safely install your flat panel display, contact your retailer
Hitachi UT32A302 | Owners Guide - Page 12
compatibility with this LCD Monitor. Accordingly, Hitachi accepts no responsability or liability for any injuries or property damage resulting from the use of such third party brackets/devices. Hitachi strongly advises that any installation of this LCD Monitor using wall mounting brackets/devices be
Hitachi UT32A302 | Owners Guide - Page 13
Stand Assembly; please refer to the Installation Manual of the Floor Stand AS-LSZ0081 or AS-LSZ0082. 3 Attach the Monitor to the Floor Stand with the 4 screws from the tabletop stand. CAUTION UT32A302 and UT32A302W LCD UT Monitors are only for use with the Hitachi AS-LSZ0081 and AS-LSZ0082 Floor
Hitachi UT32A302 | Owners Guide - Page 14
QUICK START GUIDE For more information on connecting and using your monitor, please be sure to read all instructions in this user manual. 1 Supplied Accessories (including option) User Manual Remote Control P# HL02562 AAA Size Battery X 2 Power Cord* Terminal Cover HDMI Cable HDMI Cushion
Hitachi UT32A302 | Owners Guide - Page 15
the Power (On/Off) button on the remote control. If no equipment is connected to the Monitor the color of the indicating lamp turns to Orange, and the Illumination Lamp turns off indicating Power Save Mode. Monitor Rear Panel AC Wall Socket Illumination Lamp Indicating Lamp Main Power Switch
Hitachi UT32A302 | Owners Guide - Page 16
VIDEO VIDEO INPUT (AV4) AUDIO MENU/EXIT INPUT/OK VOL q Cabinet w Panel e Remote Control Receiver r Indicating Lamp t Speaker y Illumination Lamp u Desktop Stand ;lkjhgf dsao i i Main Power switch o Service use only a RS232C s PC (RGB)/DVI Analog Audio Input Terminal d PC Connection Terminal
Hitachi UT32A302 | Owners Guide - Page 17
) ENGLISH Remote Control In addition to controlling all of the functions on your Hitachi UT LCD Monitor, the new remote control is designed to operate different types of devices, such as, DVD players, Cable Boxes, Set-Top-Boxes, Satellite Receivers, VCR's, PVR's and AVR's. The remote control must
Hitachi UT32A302 | Owners Guide - Page 18
an extended period of time. To avoid possible malfunction, read the following instructions and handle the remote control correctly. Do not drop or allow impact to affect the remote control. Do not spill water or any liquid on the remote control. Do not place the remote control on a wet surface. Do
Hitachi UT32A302 | Owners Guide - Page 19
connect the power plug to the wall socket until all other connections are completed. 2. Connect your Equipment to the Monitor Connecting to Equipment Having HDMI . Only one cable is used to transmit all video/audio/control signals, thus facilitating easy connection. Moreover, the digital signals
Hitachi UT32A302 | Owners Guide - Page 20
Electronics Control)". Please check if the connected equipment supports HDMI monitor is switched off or set to Standby mode, the On connected equipment is also turned off or in Standby mode. Off Selecting On will activate AV Center OSD interface, in case On you purchased the optional Hitachi
Hitachi UT32A302 | Owners Guide - Page 21
ENGLISH CONNECTION (continued) 2. Connect your Equipment to the Monitor (continued) Connecting to a PC The PC connection terminal (D-sub 15 pin) + the PC ( . 2 Unfasten 2 clamps, and then connect the HDMI cable and power cord to the monitor through open clamps. Clamp Power cord HDMI cable 20
Hitachi UT32A302 | Owners Guide - Page 22
Rear Panel AC Wall Socket CAUTION Use only the power cord provided. Do not use a power supply voltage other than that indicated (AC120, 60Hz). It may cause fire or electric shock. For the LCD monitor, a three-core power cord with a ground terminal is used for efficiency protection. Always be
Hitachi UT32A302 | Owners Guide - Page 23
with it, see "TROUBLESHOOTING" on 43 ~ 45 . This may help you to solve the problems. After turning On, it takes about 6 seconds until the monitor starts up. Please note that buttons on the remote control and the unit (such as the Power button) do not work during this period of time. If power is
Hitachi UT32A302 | Owners Guide - Page 24
The Volume Indicator value on the screen will shift to the right. 2. To decrease the sound volume, press the Volume Down button on the remote control or control panel. The Volume Indicator value on the screen will shift to the left. Mute button Mute 1. To mute sounds, press the button on the
Hitachi UT32A302 | Owners Guide - Page 25
the image outputting from the external equipment connected to each terminal (HDMI and RGB (/Composite)). Press the button on the remote control. Each time this button is pressed, the screen displays the corresponding mode in the following sequence. HDMI RGB (/Composite
Hitachi UT32A302 | Owners Guide - Page 26
consult your external device operating guide. The remote control will remember the codes you have programmed even after the batteries are removed from the remote control. To reset all programmed codes to factory default place remote control in TV mode, then press and hold TV mode key and enter
Hitachi UT32A302 | Owners Guide - Page 27
Remote to Control your External Devices Cable Device Button Set-Top-Box/ Satellite Receiver Device Button MY CABLE BOX CODE IS NOTE Refer to the operating guide Fav CH -Guide -Dash(-) -Color Buttons -Last CH EXCLUSIVE TV mode (Monitor) buttons These buttons are for operating the TV : -P.
Hitachi UT32A302 | Owners Guide - Page 28
PAD -Play, Stop, Pause, RWD, FWD, Skip RWD, Skip FWD, Rec EXCLUSIVE TV mode (Monitor) buttons These buttons are for operating the TV : -P. Mode -HDMI -Input -Aspect -Vol Up & Down -RGB -Mute 27 NOTE Refer to the operating guide of the VCR/PVR for operation of the buttons exclusively for the
Hitachi UT32A302 | Owners Guide - Page 29
Use the Remote to Control your External Devices AVR Device Button MY AUDIO/VIDEO RECEIVER (AVR) CODE IS NOTE Refer to the operating guide of the Down -Mute -Cursor PAD -Menu -Return EXCLUSIVE TV mode buttons These buttons are for operating the TV : -P. Mode -HDMI -Info -Aspect -RGB 28
Hitachi UT32A302 | Owners Guide - Page 30
continued) Remote Control Codes GE 0392,0566 GENERAL 0869 INSTRUMENTS GOI 0775,1775 HITACHI 0749,0819,1250 HOUSTON 0775 HTS 0775,1775 HUGHES 0722 0869 0856,1856,1810 SAT/PVR COMBO BELL EXPRESSVU DIRECT TV DISH NETWORK SYSTEM DISH PRO ECHOSTAR EXPRESSVU HUGHES NETWORK SYSTEMS JVC
Hitachi UT32A302 | Owners Guide - Page 31
Remote Control Codes WARDS 0060,0035,0037 0048,0047,0081 0033,0240,0045 0000,0042,0043 0041,0072,0038 0479,0065,0046 WHITE 0614,0616 0618,0739 1337 0880 REPLAY TV SAMSUNG SONIC BLUE SONY STACK 9 SYSTEMAX KARDON 0582,0702 HELLO KITTY 0831 HITACHI 0573,0664,1919 HITEKER 0672 INSIGNIA
Hitachi UT32A302 | Owners Guide - Page 32
use the On-Screen Display system to access the various kinds of the features and functions. Basic Operation 1. Press the button on the remote control or the Menu button on the control panel of the unit. The Main Menu is displayed on the screen as shown on the right. Picture Audio Function Setup
Hitachi UT32A302 | Owners Guide - Page 33
AV Center Control Menu Select decrease the brightness of back light on LCD panel. Reset each item on the speakers. (Off/On) Reset each item on the menu screen to the factory setting. This function is not available. In response to the connected equipment (such as DVD) through HDMI cable, the monitor
Hitachi UT32A302 | Owners Guide - Page 34
Temperature Back Light Reset Setup hint Dynamic Natural Cinema -31~+31 (+32~+40) -31~+31 You can make the best selection from 3 [+40] by pressing the button for more than 2 seconds at [+31]. The value between [+32] ~ [+40] appears in magenta. This is the special feature for dark images, so it is
Hitachi UT32A302 | Owners Guide - Page 35
ENGLISH SETUP OPERATION (continued) Watching Images from HDMI/Composite Input (continued) Setting Picture Adjustment (continued) Selected Items Contrast Mode Setup hint Dynamic Normal Linear It allows you to choose from 3 modes. Dynamic: Sharpen the gradation to improve the contrast feeling.
Hitachi UT32A302 | Owners Guide - Page 36
SETUP OPERATION (continued) Watching Images from HDMI/Composite Input (continued) Reducing Noise You can reduce the unwanted picture noise. Select "Picture" from the Menu list. Picture Contrast Mode 3D Color Management Black Enhancement DNR MPEG NR Film Mode 3D Comb Filter Reset Dynamic Normal
Hitachi UT32A302 | Owners Guide - Page 37
ENGLISH SETUP OPERATION (continued) Watching Images from HDMI/Composite Input (continued) Making the Moving Image Smooth Using this function helps to make the moving image smooth. Select "Picture" from the Menu list. Picture Contrast Mode 3D Color Management Black Enhancement DNR MPEG NR Film
Hitachi UT32A302 | Owners Guide - Page 38
SETUP OPERATION (continued) Watching Images from HDMI/Composite Input (continued) Advanced Setting Select "Setup" from the Menu list. Setup Video Power Save Off RGB Input Composite Color System Auto VCXXX-XXX XX-X Select On/Off Return Selected Items Video Power Save RGB Input Color
Hitachi UT32A302 | Owners Guide - Page 39
OK Set Return Selected Items Setup hint Contrast Brightness Color -31~+31 (+32~+40) -31~+31 -31~+31 This adjusts the contrast to meet [+40] by pressing the button for more than 2 seconds at [+31]. Values between [+32] ~ [+40] appear in magenta. This is the special feature for dark images, so
Hitachi UT32A302 | Owners Guide - Page 40
. T he image might not be adjusted to its optimum condition depending on the types of signals. In that case, adjust each item manually. AWdjuhsetns the display the value position horizontally. exceeds a possible range, it will be displayed in magenta. AWdjuhsetns the display the
Hitachi UT32A302 | Owners Guide - Page 41
ENGLISH FUNCTION Aspect Switching Each time the ASPECT button of the remote control is pressed, the screen display aspect is switched in sequence, and the status will be displayed at the bottom of the screen. HDMI/Composite Signal
Hitachi UT32A302 | Owners Guide - Page 42
The monitor has a screen mode selection feature. If an incompatible screen mode is selected to play certain software, such as a TV program, the image would appear different from the original. Take this into consideration when making screen mode choices. Use of the wide feature displaying enlarged
Hitachi UT32A302 | Owners Guide - Page 43
No Blank (no display) Off Lights orange To return to operating status, operate the personal computer, or press either the Input Select button on the control panel or the or button on the remote control. 42
Hitachi UT32A302 | Owners Guide - Page 44
response speed of the LCD panel becomes slower when the ambient temperature becomes too low. In some cases, this may result in a residual image. The residual image will disappear of its own accord as the temperature rises again to a normal level. Before calling a service of the monitor. This shows
Hitachi UT32A302 | Owners Guide - Page 45
ENGLISH TROUBLESHOOTING (continued) Symptom and Checklist (continued) Symptoms Normal picture, but no sound No picture - normal sound The remote control does not work. Only some buttons work on the remote control. Picture Frezze and/or the buttons on both the remote control and control panel do
Hitachi UT32A302 | Owners Guide - Page 46
TROUBLESHOOTING (continued) Symptom and Checklist (continued) Symptoms The image on the ". Try "Auto Adjust". INFO Check the signal status of the PC by pressing the button on the remote control to check if the input signal of the displayed image is compatible with the specification of the unit.
Hitachi UT32A302 | Owners Guide - Page 47
mm / 32 1/32(W) x 21 3/16(H) x 1 9/16(D) in 13.5 kg / 29.7 lb 10.9 kg / 24 lb Operating : 5°C to 35°C, Storage : 0°C to 40°C Operating : 20% to 80%, Storage : 20% to 90% (non-condensing) Power supply Power consumption/ at standby AC120V, 60Hz 136 W, 1.2 A/< 0.5 W Audio output speaker 6W + 6W
Hitachi UT32A302 | Owners Guide - Page 48
PRODUCT SPECIFICATIONS (continued) Signal Input RGB terminal (D-sub 15 pin connector) Pin Input signal 1 R 2 G/Composite 3 B 4 No connection 5 GND 6 R.GND 7 G.GND/Composite 8 B.GND 9 +5V 10 GND 11 No connection 12 [SDA] 13 H.sync 14 V.sync. 15 [SCL] HDMI connector
Hitachi UT32A302 | Owners Guide - Page 49
CEA-861D CEA-861D CEA-861D CEA-861D CEA-861D CEA-861D CEA-861D CEA-861D CEA-861D CEA-861D CEA-861D With RGB input Timing Name 640 x 400 @ 70Hz 640 x 480 @ 60Hz 800 x 600 @ 60Hz 1024 x 768 @ 60Hz 1280 x 768 @ 60Hz 1360 x 768 @ 60Hz Horizontal Frequency (kHz) 31.469 31
Hitachi UT32A302 | Owners Guide - Page 50
PRODUCT SPECIFICATIONS (continued) Dimensions Unit: Inch/(mm) 17-1/4 (437.9) 32-1/32 (813.7) 27-5/8 (701.7) 4-1/16 (103.3) 1-3/8 (35.0) Min 1-9/16 (39.6) Max 15-19/32 (396.3) 13-13/32 (340.6) 23-1/8 (587.1) 21-3/16 (538.1) 1-15/16 (49) 15-3/4 (400) 9-13/16 (249) 7-7/8 (200) 49
Hitachi UT32A302 | Owners Guide - Page 51
on your warranty card or operating guide. Hitachi Home Electronics (America), Inc. Customer Service Support PO Box 3900 Peoria, IL 61612 [email protected] Look for your French Manual on the outside of the box. If manual is missing, call 800-HITACHI for a copy. Pour de plus amples
Hitachi UT32A302 | Owners Guide - Page 52
or LCD Flat Panel Monitors; (ii) Products located outside the U.S.A. or Puerto Rico; (iii) Products located more than seventy-five (75) driving miles from Hitachi's nearest Authorized Service Facility. If the foregoing clauses (i), (ii), (iii) apply, then the Product owner will be responsible for
Hitachi UT32A302 | Owners Guide - Page 53
HITACHI of attorneys' fees in connection with your violation of this Agreement. You further understand that you may be held legally responsible goods or services, or HITACHI may terminate this Agreement immediately at any time by providing notice to you. 4. SOFTWARE UPGRADES. In the future, HITACHI