Hitachi X308 User Manual

Hitachi X308 - CP XGA LCD Projector Manual

Get Hitachi X308 - CP XGA LCD Projector PDF manuals and user guides
UPC - 050585151307
View all Hitachi X308 manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi X308 manual content summary:

  • Hitachi X308 | User Manual - Page 1
    Projector CP-X308 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read all manuals for this product. Be sure to read "Safety Guide that may appear in this manual. • The reproduction, transfer or copy of all or any part of
  • Hitachi X308 | User Manual - Page 2
    lamp 64 Selecting an aspect ratio 18 Cleaning and replacing the air filter. . . 66 Adjusting the projector's elevator . . . 19 Replacing the internal clock battery. . . 68 Adjusting the zoom and focus. . . . . . 19 Other care 69 Using the automatic adjustment feature. . . . 20 Troubleshooting
  • Hitachi X308 | User Manual - Page 3
    monitored via LAN connection. ü U sing the designated wireless network card realizes wireless LAN connection. Preparations Contents of package Please see the "Contents of package" section in the User's Manual (concise) which is a book. Your projector should come with the items shown there. Contact
  • Hitachi X308 | User Manual - Page 4
    Part names Part names Projector (1) Lamp cover (&64). The lamp unit is inside. (2) Focus ring (&19) (3) Zoom ring (&19) (4) Control panel (&5) (5) Elevator buttons (x 2) (&19) (6) Elevator feet (x 2) (&19) (7) Remote sensor (&14) (8) Lens (&16, 69) (9) Lens cover (&3) (10) Intake vents (11) Filter
  • Hitachi X308 | User Manual - Page 5
    Part names Control panel (1) STANDBY/ON button (&16) (2) INPUT button (&17, 23) (3) MENU button (&23) It consists of four cursor buttons. (4) POWER indicator (&16, 71) (5) TEMP indicator (&71) (6) LAMP the shutdown switch only when the projector is not turned off by normal procedure, since pushing
  • Hitachi X308 | User Manual - Page 6
    Part names Remote control (1) VIDEO button (&18) (2) COMPUTER button (&17) (3) SEARCH button (&18) (4) STANDBY/ON button (&16) (5) ASPECT button (&18) (6) AUTO button (& MENU ESC ENTER RESET (3) (4) (6) (7) (12) (14) (15) (13) (19) (18) (21) (23) (25) Back of the remote control (26) 
  • Hitachi X308 | User Manual - Page 7
    c2 Screen height (±10%) On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special installation such as suspending from a ceiling. a Screen size (diagonal) inch
  • Hitachi X308 | User Manual - Page 8
    into or stick to the vents on the bottom of the projector. This projector has some intake vents also on the bottom. ►Do not place the projector anyplace where it may get wet. Getting the projector wet or inserting liquid into the projector could cause fire, electric shock and/or malfunction of the
  • Hitachi X308 | User Manual - Page 9
    Setting up Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the
  • Hitachi X308 | User Manual - Page 10
    and unplug their power cords prior to connecting them to projector. Connecting a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction or damage to the device and the projector. ►Use appropriate accessory or designated cables. Ask your
  • Hitachi X308 | User Manual - Page 11
    with screws. • When connecting a laptop PC to the projector, be sure to activate the PC's external RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the instruction manual of the corresponding laptop PC. • When the
  • Hitachi X308 | User Manual - Page 12
    menu under the MIU menu for SD Storage card only. 2. Turn the projector off and unplug the power code from the projector for the wireless network card only. 3. Remove the SD card slot cover. After taking the SD card away, replace the SD card slot cover. WARNING ►Do not disassemble or modify the
  • Hitachi X308 | User Manual - Page 13
    as incorrect or faulty connections may result in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged the security bar on the projector. Also this product has the security slot for the Kensington lock. For details, see the manual of the security tool.
  • Hitachi X308 | User Manual - Page 14
    the battery cover, remove it. 2. Align and insert the two AA batteries (HITACHI MAXELL, Part No.LR6 or R6P) according to their plus and minus terminals as indicated in the remote control. 3. Replace the battery cover in the direction of the arrow and snap it back into place. WARNING ►Always handle
  • Hitachi X308 | User Manual - Page 15
    REMOTE FREQ. in the SERVICE item of the OPTION menu (46) of the projector to be controlled should be set to the same mode as the remote required for this function. And also this function may not work depending on the PC's configurations and mouse drivers. - You cannot do things like press two
  • Hitachi X308 | User Manual - Page 16
    will light up in steady orange (71). Then wait several seconds because the buttons may not function for these several seconds. 3. Press STANDBY/ON button on the projector or the remote control. The projection lamp will light up and POWER indicator will begin blinking in green. When the power is
  • Hitachi X308 | User Manual - Page 17
    the DISPLAY of the C.C. menu and the input signal from the port supports the C.C. feature (63) MUTE button VIDEO COMPUTER SEARCH ASPECT AUTO is detected. 1. Press COMPUTER button on the remote control. Each time you press the button, the projector switches its input port from the current port
  • Hitachi X308 | User Manual - Page 18
    is sent from PC on the "Live Mode" of MIU (53). Selecting an aspect ratio 1. Press ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn.  For a computer signal or MIU signal NORMAL  4:3  16:9  SMALL  F or a video
  • Hitachi X308 | User Manual - Page 19
    the projector gently. 5. If necessary, the elevator feet can be manually twisted to make more precise adjustments. Hold the projector when handle the elevator buttons without holding the projector, since the projector may drop down. ►Do not tilt the projector other than elevating its front within
  • Hitachi X308 | User Manual - Page 20
    The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (45). VIDEO COMPUTER SEARCH ASPECT AUTO BLANK Adjusting the position 1. Press POSITION button on the remote control when no menu is indicated. The
  • Hitachi X308 | User Manual - Page 21
    cursor buttons to select AUTO or MANUAL operation, and press the ► projector is inclined to near ±30 degree or over, this function may not work well. ● This function will be unavailable when Transition Detector is on (51). Using the magnify feature 1. Press the ON button of MAGNIFY on the remote
  • Hitachi X308 | User Manual - Page 22
    continues projecting a still image for a long time, the LCD panel might possibly be burned in. Do not leave the projector in the FREEZE mode for too long. Temporarily blanking the screen 1. Press BLANK button on the remote control. The BLANK screen will be displayed instead of the screen
  • Hitachi X308 | User Manual - Page 23
    MUTE SEARCH AUTO PAGE DOWN PAGE UP COMPUTER HOME END VIDEO ASPECT ON MAGNIFY FREEZE OFF POSITION 1. Press the MENU button on the remote control or the projector. The Advanced Menu or EASY MENU, which has priority just after powered on will appear. If you want to move the menu position
  • Hitachi X308 | User Manual - Page 24
    certain input port is selected, or when a certain input signal is displayed. ● When you want to reset the operation, press RESET button on the remote control during the operation. Note that some items (ex. LANGUAGE, H PHASE, VOLUME) cannot be reset. ● In the Advanced Menu, when you want to return
  • Hitachi X308 | User Manual - Page 25
    is "CUSTOM". Please refer to GAMMA (27) and COLOR TEMP (28) items in PICTURE menu. • When this function is performed, a certain extra such as a line may appear. (continued on next page) 25
  • Hitachi X308 | User Manual - Page 26
    the ◄/► buttons switches the mode for mirror status. See MIRROR item in SETUP menu (36). Performing this item resets all of EASY MENU items except FILTER TIME and LANGUAGE. A dialog is displayed for confirmation. Selecting RESET using the ▲ button performs resetting. The usage time of the air
  • Hitachi X308 | User Manual - Page 27
    the left end of the test pattern cannot be controlled with any of equalizing adjustment bar. • When this function is performed, lines or other distortion may appear. (continued on next page) 27
  • Hitachi X308 | User Manual - Page 28
    changes as below. No pattern ð Gray scale of 9 steps Ramp  Gray scale of 15 steps • When this function is performed, lines or other distortion may appear. COLOR Using the ▲/▼ buttons adjusts the strength of whole color. Strong ó Weak • This item can be selected only for a video signal, s-video or
  • Hitachi X308 | User Manual - Page 29
    SHARPNESS MY MEMORY Description Using the ▲/▼ buttons adjusts the sharpness. Strong ó Weak • There may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. This projector has 4 memories for adjustment data (for all the items of PICTURE menu
  • Hitachi X308 | User Manual - Page 30
    picture) • This item can be selected only for a video, s-video and component video signal. • When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small. V POSITION Using the ▲/▼ buttons adjusts the vertical position. Up
  • Hitachi X308 | User Manual - Page 31
    correctly with some input. When this function is performed for a video signal, a certain extra such as a line may appear outside a picture. • The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (45). 31
  • Hitachi X308 | User Manual - Page 32
    screen image will be sharp. FILM adapts to the 2-3 Pull-Down conversion system. But these may cause a certain defect (for example, jagged line) of the picture for a quick moving object for a SCART RGB input to the projector. For your reference, see the TECHNICAL part. (continued on next page) 32
  • Hitachi X308 | User Manual - Page 33
    is selected, a moving pictures are displayed more smoothly. • This function may cause a certain degradation of the picture. In such a case, please sync on G signal. • When SYNC ON G ON is selected, the picture may be distorted with certain input signals. In such a case, remove the signal connector
  • Hitachi X308 | User Manual - Page 34
    RESOLUTION Description The resolution for the COMPUTER IN1 and IN2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button the previous resolution. CUSTOM ↓ • For some pictures, this function may not work well. 34
  • Hitachi X308 | User Manual - Page 35
    to the full WIDE (wide-angle focus) whenever possible. • When the projector is placed on the level (about ±3°), this function may not work. • When the projector is inclined to near ±30 degree or over, this function may not work well. • This function will be unavailable when the Transition Detector
  • Hitachi X308 | User Manual - Page 36
    V:INVERT ó H&V:INVERT If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (51) will be displayed when projector is restarted after the power switch is turned off. VOLUME Using the ▲/▼ buttons adjusts the volume. High ó Low SPEAKER Using the ▲/▼ buttons
  • Hitachi X308 | User Manual - Page 37
    C.C.(Closed Caption) is automatically activated, if the C.C. is set to AUTO in the DISPLAY menu of the C.C. menu and the signal from the input port supports the C.C. feature. (63) 37
  • Hitachi X308 | User Manual - Page 38
    NEDERLANDS � � SUOMI PORTUGUÊS � � SVENSKA Using the buttons adjusts the menu position. MENU POSITION To quit the operation, press MENU button on the remote control or keep no operation for about 10 seconds. Using the ▲/▼ buttons switches the mode for the BLANK screen. The BLANK screen
  • Hitachi X308 | User Manual - Page 39
    SCREEN menu (continued) SCREEN menu Item Description Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF START UP MyScreen ORIGINAL TURN OFF Feature Screen
  • Hitachi X308 | User Manual - Page 40
    button. 2. Using the buttons adjusts the frame position. Please move the frame to the position of the image which you want to use. The frame may not be able to be moved for some input signals. To start registration, press the ENTER button. To restore the screen and return to the
  • Hitachi X308 | User Manual - Page 41
    while the TURN OFF is selected, the picture on screen is frozen without any messages, which is not a malfunction. (22) Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. The SOURCE NAME menu
  • Hitachi X308 | User Manual - Page 42
    or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table. Item AUTO is started from the current port. Then when an input is found, the projector will stop searching and display the image. COMPUTER IN1  COMPUTER IN2 VIDEO
  • Hitachi X308 | User Manual - Page 43
    the projector lamp will be turned off. If one of the projector's buttons or the remote lamp time only when you have replaced the lamp, for a suitable indication about the lamp. • For the lamp replacement, see the section "Lamp" (64). FILTER TIME The filter time is the usage time of the air filter
  • Hitachi X308 | User Manual - Page 44
    functions to MY BUTTON 1 and 2 on the remote control (6). Choose 1 or 2 on the MY Changes the PICTURE MODE (25). • FILTER RESET: Displays the filter time reset confirmation dialogue (43). • the REMOVE MEDIA menu. Selecting this item displays the SERVICE menu. Select an item using the ▲/▼ buttons,
  • Hitachi X308 | User Manual - Page 45
    projector, environment around the projector, etc., the automatic adjustment may not work correctly. In such a case, please choose DISABLE to disable the automatic adjustment, and make adjustment manually. SERVICE REMINDER *** HRS PASSED AFTER THE LAST FILTER CHECK" will appear after the timer
  • Hitachi X308 | User Manual - Page 46
    SERVICE (continued) Description KEY LOCK Using the ▲/▼ buttons turns on/off the key lock feature. When TURN ON is selected, the buttons on the projector the remote control. REMOTE FREQ. Use the ▲/▼ button to change the projector's remote sensor the items LAMP TIME, FILTER TIME, LANGUAGE, SECURITY and MIU
  • Hitachi X308 | User Manual - Page 47
    OPTION menu (continued) OPTION menu Item SECURITY Description This projector is equipped with security functions. User registration is required before using the security functions. Please contact your local dealer. 1. Using Security Features 1.1 Inputting the PASSWORD 1.1-1 Use the ▲/▼ buttons
  • Hitachi X308 | User Manual - Page 48
    for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds. The 10-digit Inquiring Code will be displayed. • If -digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. 2. Using the MyScreen PASSWORD Function The
  • Hitachi X308 | User Manual - Page 49
    dealer with the 10-digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. 3. Using the PIN LOCK Function PIN LOCK is a function which prevents the projector from being used unless a registered Code is input. 3.1 Registering the PIN Code 3.1-1 Use
  • Hitachi X308 | User Manual - Page 50
    3.1-3  Input a 4 part PIN Code using the COMPUTER projector is restarted after AC power projector projector will turn off. Afterwards the projector will turn off every time an incorrect PIN Code is input. The projector only when the projector is started after projector will turn off. 3.3-2 Contact
  • Hitachi X308 | User Manual - Page 51
    angle and mirror setting will be recorded. • This feature may not function properly if the projector is not in a stable position when TURN ON is selected displayed for about 5 minutes the lamp will turn off. This function will activate only when the projector is started after turning off the
  • Hitachi X308 | User Manual - Page 52
    -digit Inquiring Code will be displayed inside the box. 4.4-3 Contact your dealer with the 10-digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. 52
  • Hitachi X308 | User Manual - Page 53
    the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. See the User's Manual - Network Guide for details of MIU operation
  • Hitachi X308 | User Manual - Page 54
    MODE The Presenter Mode that is set in the Live Viewer 3 software installed into your PC can be turned to off. A message, MODE function. • See the User's Manual - Network Guide for details. (84) LIVE MODE SETTING (continued) MULTI PC MODE The projector supports the Single PC mode that
  • Hitachi X308 | User Manual - Page 55
    in the Single PC mode connected to the projector, the DISPLAY USER NAME box is shown as right. MULTI PC mode The Display User Names will be shown in the DISPLAY USER NAME box. • See the User's Manual - Network Guide for details of the Display User Name setting. (22) Selecting this item displays
  • Hitachi X308 | User Manual - Page 56
    so the menu will appear. • Also these items can be set with Web Remote Control (Refer to Network Guide) except REMOVE MEDIA. Selecting this item displays the MIU SETUP menu. Use the be assigned an IP address if the projector could not obtain an IP address from server even if DHCP is "ON". (continued
  • Hitachi X308 | User Manual - Page 57
    Use the buttons to enter the Year (last two digits), Month, Date, Hour and Minute. • The projector will override this setting and retrieve DATE AND TIME information from the Time server when SNTP is enabled. ( Date/Time Settings of the User's Manual - Network Guide) (continued on next page) 57
  • Hitachi X308 | User Manual - Page 58
    the network communication system. Select it according to the setting of your PC. ADHOC  INFRASTRUCTURE Use the ▲/▼ buttons to select the channel of the wireless LAN while using it. Select it according to the setting of your PC. The channels 1 to 11 are available. • The available channels would be
  • Hitachi X308 | User Manual - Page 59
    5M6M9M11M12M • The AUTO mode automatically selects the optimum rate. • Transfer rates may change due to the network situation. Use the ▲/▼ buttons to select the network mode. NETWORK MODE WIRELESS  WIRED • The network mode will be initialized whenever the power is turned on with the power
  • Hitachi X308 | User Manual - Page 60
    ENTER or INPUT button, 1 character or all characters will be erased. The PROJECTOR NAME can be input up to 64. (3) To change an already inserted screen and press the ENTER or INPUT button. To revert to the previous PROJECTOR NAME without saving changes, move the cursor to the CANCEL on screen and
  • Hitachi X308 | User Manual - Page 61
    the e-SHOT function. (61) The application software "PJTransfer" is required to store image(s) into the projector. Use the ▲/▼ buttons to select an item which is a still image by the e-SHOT ( e-SHOT (Still Image Transfer) Display of the User' s Manual - Network Guide) and the ► or ENTER button to
  • Hitachi X308 | User Manual - Page 62
    in the "PROJECTOR NAME" and "SSID" field until you setup those items. (58, 59, 60) • When the voltage level of the battery for the built in clock decreases, the set time may become incorrect even though accurate date and time are input. Replace the battery suitably. (68) • MAC wireless will not
  • Hitachi X308 | User Manual - Page 63
    is required to have NTSC format video source supporting C.C. feature to utilize this function. Item is AUTO or NTSC on the INPUT menu. • It may not work properly, depending on equipment or signal source. such as news reports or a TV program guide. The information covers the entire screen. Not
  • Hitachi X308 | User Manual - Page 64
    , and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, contact to your dealer and tell the lamp type number. Type number : DT00841 Replacing the lamp lamp cover 1. Turn the projector off, and
  • Hitachi X308 | User Manual - Page 65
    In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken. • Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that the screws are screwed in firmly. Loose screws could result in damage or
  • Hitachi X308 | User Manual - Page 66
    , contact to your dealer and tell the air filter type number. Type number : MU04951 When you replace the lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. 1. Turn the projector off, and unplug the power cord. Allow
  • Hitachi X308 | User Manual - Page 67
    lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. • Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about the air filter. • The projector may display
  • Hitachi X308 | User Manual - Page 68
    edge up, and remove it from the projector. Battery Slot 3. Remove the battery 5. Replace a new battery. Replace battery with HITACHI MAXELL, Part No.CR2032 only. Use of another battery may present replacing the battery. ( Date/Time Settings in the User's Manual (detailed) - Network Guide) 68
  • Hitachi X308 | User Manual - Page 69
    not touch the lens directly with your hand. Caring for the cabinet and remote control Incorrect care could have adverse influence such as discoloration, peeling paint, etc. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the
  • Hitachi X308 | User Manual - Page 70
    service company. Otherwise if a problem occurs with the projector the specs for your projector or the signal source specs. CHECK THE FILTER CHECK. the air filter referring to the "Air filter" section of this manual. FILTER MAINTENANCE IS ESSENTIAL After you have cleaned or changed the air filter
  • Hitachi X308 | User Manual - Page 71
    Troubleshooting Regarding the indicator lamps When operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER LAMP TEMP indicator indicator indicator Description Lighting Turned Turned The projector is in a standby state.
  • Hitachi X308 | User Manual - Page 72
    At least 1 Power ON schedule is saved to the projector. Please refer to "Schedule Settings" section of User's Manual-Network Guide. NOTE • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off
  • Hitachi X308 | User Manual - Page 73
    Troubleshooting Phenomena that may be easy to be mistaken for machine defects About the phenomenon power plug from the power outlet, and allow the projector to cool down at least 10 minutes, then turn the power on again. Either there is no lamp and/or lamp cover, or either of these has not been
  • Hitachi X308 | User Manual - Page 74
    Troubleshooting Phenomena that may volume to a higher level using the menu function or the remote control. The AUDIO/SPEAKER setting is not correct. Correctly set higher level using the menu function. The computer cannot detect the projector as a plug and play monitor. Make sure that the computer
  • Hitachi X308 | User Manual - Page 75
    Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon . Select NORMAL for WHISPER item in the SETUP menu. The lamp is approaching the end of its product lifetime. Replace the lamp. Either the focus and/or horizontal phase settings are not properly
  • Hitachi X308 | User Manual - Page 76
    Lamp Audio output Power supply Power consumption Temperature range Size Weight (mass) Ports Optional parts Specifications Liquid crystal projector 4 pin x1 VIDEO RCA x1 Lamp: DT00841 Air filter: MU04951 Wireless network card: VA08331 *For more information, contact to your dealer. 76
  • Hitachi X308 | User Manual - Page 77
    Specifications (continued) Specifications 117 129 270 340 [unit: mm] 77
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
±
Projector
CP-X308
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this
product. Be sure to read “Safety Guide” first. After reading them, store them in a
safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
• Mac is registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
All other trademarks are the properties of their respective owners.
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.