Hitachi X308 Network Guide

Hitachi X308 - CP XGA LCD Projector Manual

Get Hitachi X308 - CP XGA LCD Projector PDF manuals and user guides
UPC - 050585151307
View all Hitachi X308 manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi X308 manual content summary:

  • Hitachi X308 | Network Guide - Page 1
    Projector CP-X308 User's Manual (detailed) Network Guide Thank you for purchasing this projector. This projector has the network function that brings you the following main features. ü L ive Mode This projector can project your PC images on screen through wireless or wired network, which can erase
  • Hitachi X308 | Network Guide - Page 2
    88 3.1.3 Display User Name 22 4.1.14 Logoff 88 3.2 Install "Live Viewer 3 23 4.2 E-mail Alerts 89 3.2.1 Minimum PC hardware and software requirement. . . 23 4.3 Projector Management using SNMP. . . 91 3.2.2 Software Installation Procedure. . . 24 4.4 Event Scheduling 92 3.2.3 Version
  • Hitachi X308 | Network Guide - Page 3
    MIU Menu. (MIU Menu in the User's Manual (detailed) - Operating Guide) CAUTION nThe accompanying IEEE802.11b/g wireless network card uses the 2.4GHz radio for confirming where and with what channels you may use the accompanying IEEE802.11b/g wireless network card. Please consult with your dealer
  • Hitachi X308 | Network Guide - Page 4
    Caution 0560 ! The manufacturer (Gemtek) hereby declare that this equipment (the wireless network card), model SD-Link11g is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. 
  • Hitachi X308 | Network Guide - Page 5
    "Live Viewer 3" captures PC screen image and sends to the projector through wired LAN or wireless LAN connection. (&20) Live Viewer 3 Fig. 1.1.a "Live Viewer 3" outlines (through wireless LAN connection) Fig. 1.1.b "Live Viewer 3" Main menu One projector can be connected with up to 4 PCs using "Live
  • Hitachi X308 | Network Guide - Page 6
    a code that includes SSID and IP address and other information that are required for the network connection. The Passcode is given on screen by the projector, and then all you need to do is to input the code to the "Live Viewer 3" in your PC. (&26) Fig.1.2 PASSCODE on the
  • Hitachi X308 | Network Guide - Page 7
    web browser and it offers the menus to configure the network settings, monitor the projector and so on. The Web Remote Control, one of the menus of web browser, allows you to control the projector like bundled remote control including operating the "Live Mode" and "PC-LESS Presentation". (&64) Fig
  • Hitachi X308 | Network Guide - Page 8
    acknowledges as multiple devices connected). • The supported formats are FAT 12, FAT 16(FAT) and FAT 32. NTFS is not supported. • USB hub is not supported. Fig. 1.4 "PC-LESS Presentation" outlines "PC-LESS Presentation" can be controlled via keypad on the projector or remote control (&101). 
  • Hitachi X308 | Network Guide - Page 9
    limitations for the folders and files. (1) Alphanumeric and Japanese characters are supported if the language setting is Japanese. (2) Alphanumeric and Latin-1 characters are supported if the language setting is NOT Japanese. • The files may not be able to access depending on the type of USB hard
  • Hitachi X308 | Network Guide - Page 10
    , the projector may not be able to communicate properly with your PC, even if the PC you are using is equipped with built-in wireless LAN function. To eliminate communication problems, please use a Wi-Fi certified wireless network device. 2.2 Quick connection The "Live Viewer 3" supports very quick
  • Hitachi X308 | Network Guide - Page 11
    LAN - If you don't use the "Live Viewer 3", you need to set up your network connection manually. This section explains how to set it up manually. 2.3.1 Equipments connection Connect the projector and PC with a LAN cable. * Before connecting with an existing network, contact the network administrator
  • Hitachi X308 | Network Guide - Page 12
    2. Equipment connection and network setting 2.3 Manual network connection setting - Wired LAN - (continued) 5) Open "Local Area Connection Properties" window you use for network device. (Fig. 2.3.2.c) Fig. 2.3.2.c "Local Area Connection Properties" window 6) Set
  • Hitachi X308 | Network Guide - Page 13
    network connection setting - Wired LAN - (continued) [About IP address] ■ Setting manually The Network address portion included in the IP address set into your PC should be common with projector's one. And the entire IP address in the PC should not be overlapped with other equipments in the same
  • Hitachi X308 | Network Guide - Page 14
    2. Equipment connection and network setting 2.3 Manual network connection setting - Wired LAN - (continued) 2.3.3 "Internet Option" setting 1) Click "Internet Options" in "Network and Internet Connections" window (Fig. 2.3.3.a) to open "Internet Properties" window. (Fig.2.3.3.b)
  • Hitachi X308 | Network Guide - Page 15
    and network setting 2.3 Manual network connection setting - Wired LAN - (continued) Fig. 2.3.3.c "Local Area Network (LAN) Settings" window 3) Uncheck all boxes in "Local Area Network (LAN) Settings" window. (Fig. 2.3.3.c) 2.3.4 Check connection Check PC and projector are connected properly here
  • Hitachi X308 | Network Guide - Page 16
    case IEEE802.11b/g wireless LAN device is built-in the PC, make it valid and make other network connections invalid. If wireless LAN device is not built-in the PC, connect IEEE802.11b/g wireless LAN device and install device driver. (Refer to the user guide for PC and wireless LAN device for detail
  • Hitachi X308 | Network Guide - Page 17
    PC or the menu on the projector. Refer to the item 4.1.3 Network Settings (&69) or & MIU Menu in the User's Manual (detailed) - Operating Guide. 1) Open "Network Connections". (Fig. 2.4.2.a) Fig. 2.4.2.a "Network Connections" 2) Open "Wireless Network Connection Properties". (Fig. 2.4.2.b) Fig
  • Hitachi X308 | Network Guide - Page 18
    2. Equipment connection and network setting 2.4 Manual network connection setting -Wireless LAN (continued) 3) Set used protocol as "TCP/IP" and open TCP/IP property. Set IP address and other settings as same as wired LAN connection set up. (&12) 4) Open "Wireless Networks" tab. (Fig. 2.4.2.c) Fig.
  • Hitachi X308 | Network Guide - Page 19
    2. Equipment connection and network setting 2.4 Manual network connection setting -Wireless LAN (continued) 7) Set each item as follows. Network name (SSID): wireless Data encryption: not enabled (Default setting is not enabled.) NOTE • If the default setting in the projector is used, set the data
  • Hitachi X308 | Network Guide - Page 20
    your requirement. - Passcode connection - Profile data connection - History record connection - My Connection - Manual connection 3) Confirm the connection to your destination (&50) In some case, there are several projectors connected to the same network. Before you send your image, confirm that the
  • Hitachi X308 | Network Guide - Page 21
    's image on screen in real time through either wired or wireless LAN. So, no signal cable connection is required. 3.1.1 projector displays images sent by one PC. 2) Multi PC mode The projector screen is divided to 4 zones. The projector displays images in one zone sent by a PC, so that the projector
  • Hitachi X308 | Network Guide - Page 22
    (continued) 3.1.2 Presenter mode In the Single PC mode, the projector can be occupied by one PC and can block an access from menu. (&58) 3.1.3 Display User Name The user name can be input in the "Live Viewer 3", which is displayed on screen by operating the menu on the projector. So, it can be found
  • Hitachi X308 | Network Guide - Page 23
    maybe limited, please see the instruction manual that is supplied with the latest "Live Viewer 3". • Set your PC's resolution to XGA or less. Refer to the user manual for your PC or Windows. • In some cases, your PC's screen will not be displayed correctly by the projector. If the resolution is
  • Hitachi X308 | Network Guide - Page 24
    on your PC, you will need to replace E with the correct drive letter assigned to your CD-ROM drive. If the software has been already installed, Uninstallation will be another folder. 7) Confirm the program folder name. If "Projector Tools" is okay, press [Next] to continue. If not, enter the desired
  • Hitachi X308 | Network Guide - Page 25
    the projector, the software will not work properly. Live Viewer Version CP-X267 Models CP-X268A CP-X608 CPX2 2.01 ™ Í Í 2.1x Í ™ ™ 2.20 Í ™ ™ 3.xx Í ™ ™ • "x" in the version means 0 or greater. CP-X308 CP-X417 CP-X807 Í Í Í ™ Please check and get the latest version at Hitachi
  • Hitachi X308 | Network Guide - Page 26
    PC Desktop screen may be changed. • Even if the resolution is changed, it will be back to the original when the "Live Viewer 3" is closed. • If the resolution is not changed, the projector will display XGA(1024x768) portion from top left corner of your PC screen. • Refer to the user manual for your
  • Hitachi X308 | Network Guide - Page 27
    , the wireless LAN adapters in your PC are shown in the list. • If the wired LAN is selected, the wired LAN adapters in your PC are shown. [trouble shooting] n Are you sure that you want to turn on the network adapter? The screen is displayed in the case that the selected network
  • Hitachi X308 | Network Guide - Page 28
    is selected. Be sure that the projector is connected with a LAN cable to Not to turn it disabled(Off), click [No], but the projector may not be able to communicate with your PC through the network. • If any application software having the firewall function is installed into you PC
  • Hitachi X308 | Network Guide - Page 29
    , set the DHCP off in the projector. • If no profile data is assigned to the My Connection, it can't be used. [trouble shooting] n A network connection could not be established. Windows prevented network configuration changes. You may log in the Windows under User authority. Click [OK] to return to
  • Hitachi X308 | Network Guide - Page 30
    3. Using the Live Mode 3.3 Quick connection to the network (continued) n Are you sure you want to connect the selected projector? The message is appeared when the wireless adapter you selected is already used for another network connection. • To connect, click [Yes]. Proceed to the 3.6 Confirm the
  • Hitachi X308 | Network Guide - Page 31
    from the list. • Configure Network Settings Manually Proceed to the item 3.5.3 Configuring manually (&43) If you need to make the setting manually, select [Configure Network Settings Manually]. Select From List Before selecting this item, your PC and the projectors need to be connected to the same
  • Hitachi X308 | Network Guide - Page 32
    system meets one of them, set the connection manually. 1) Any encryption code is used. The SSID only. Factory default SSID 1 : wireless Factory default SSID 2 : WLANProjector1 Factory 3) Press the MENU button on the remote control or the buttons on the projector to show the menu on screen.
  • Hitachi X308 | Network Guide - Page 33
    3. Using the Live Mode 3.4 Passcode connection (continued) Method 2 1) Turn on the projector, and make sure that the projector image is on screen. 2) Press the MENU button on the remote control or the buttons on the projector to show the menu on screen. 3) Use the ▲/▼ cursor buttons to select
  • Hitachi X308 | Network Guide - Page 34
    . If the manual setting screen is displayed, please follow the item 3.4.3. [trouble shooting] n Incorrect PassCode. The incorrect Passcode was input. Click [Back] to return to the "Please enter the PassCode" screen. Check the PassCode on the projector screen (32) and enter the code again. 34
  • Hitachi X308 | Network Guide - Page 35
    network configuration changes. 3. Using the Live Mode You may log in the Windows under User authority. Click [OK], then the "Live Viewer The reason is that the IP address set in the projector is the global address. Following the instruction by the network administrator, set the IP address and
  • Hitachi X308 | Network Guide - Page 36
    main menu to go back to the item 3.3.3 Connecting to the network. (&31) n Are you sure you want to connect the selected projector? The message is appeared when the wireless adapter you selected is already used for another network connection. • To connect, click [Yes]. Proceed to the 3.6 Confirm the
  • Hitachi X308 | Network Guide - Page 37
    are required to input the network setting manually if you use any encryption code or your unique SSID or Subnet mask except Class A/B/C. (32) If you use the wired LAN, go to (40). Wireless LAN The required information depends on how you connect the projector and PC. • Direct connection between the
  • Hitachi X308 | Network Guide - Page 38
    (example) Encryption: WEP64bit (example) Encryption key *2 example) 2) The setting on the projector. *3 Enter the following information. Subnet mask *4: 255.255.255.128 (example) 3) Click [Connect]. 4) The wireless connection will be established. Proceed to the item 3.6 Confirm the connection to
  • Hitachi X308 | Network Guide - Page 39
    projector connected to an access point by the wireless LAN 1) Enter the following information that is set in the projector. *1 SSID *2: wireless on the projector, refer to the NOTE. (40) *2 If you don't use the factory default SSID, you need to set your SSID by either entering manually or
  • Hitachi X308 | Network Guide - Page 40
    , take the following procedure to find it out. 1) Turn on the projector, and make sure that the projector image is on screen. 2) Press the MENU button on the remote control or the buttons on the projector to show the menu on screen. 3) Use the ▲/▼ cursor buttons to select the Advanced Menu
  • Hitachi X308 | Network Guide - Page 41
    manual configuration. • Profile • History • Configure Network Settings Manually 3. Using the Live Mode 3.5.1 Profile connection Selecting a profile data connect the network with the projector projector, the network connection between the projector and PC may not be established since IP address may
  • Hitachi X308 | Network Guide - Page 42
    when the network is connected by using the history record. • If the DHCP is set on in the projector, the network connection between the projector and PC may not be established since IP address may be varied. • Even if you use the profile connection, it will be memorized as a history record. 42
  • Hitachi X308 | Network Guide - Page 43
    the network connection between the projector and PC is input manually. Select [Configure Network Settings Manually]. 3. Using the Live Mode The information to be input manually is different, depending on how you want to connect the projector and PC. Wireless LAN The required information depends
  • Hitachi X308 | Network Guide - Page 44
    3. Using the Live Mode 3.5 Manual configuration (continued) Direct connection between the projector and PC (AdHoc mode) 1) Enter the following information that is set in the projector. *1 SSID: wireless (example) Encryption: WEP64bit (example) Encryption key *2 example) Mode: ADHOC 2) Click [Next].
  • Hitachi X308 | Network Guide - Page 45
    3. Using the Live Mode 3.5 Manual configuration (continued) The projector connected to an access point by a LAN cable 1) The that is set in the projector. *3 IP Address : 192.168.1.10 (example) Subnet mask: 255.255.255.0 (example) 4) Click [Connect]. 5) The wireless connection will be established.
  • Hitachi X308 | Network Guide - Page 46
    3. Using the Live Mode 3.5 Manual configuration (continued) The projector connected to an access point by the wireless LAN 1) The setting on the access point. *1 Enter the following information. SSID: WirelessAccessPoint (example) Encryption: WEP64bit (example) Encryption key *2 example) Mode:
  • Hitachi X308 | Network Guide - Page 47
    3.5 Manual configuration (continued) Wired LAN 1) Enter the following information for the projector. *1 IP projector, refer to the NOTE. (40) [trouble shooting] n A network connection could not be established. Windows prevented network configuration changes. You may log in the Windows under User
  • Hitachi X308 | Network Guide - Page 48
    3. Using the Live Mode 3.5 Manual configuration (continued) n Automatic connection failed. The reason is that the IP address set in the projector is the global address. Following the instruction by the network administrator, set the IP address and Subnet mask in the "Live Viewer 3". After input
  • Hitachi X308 | Network Guide - Page 49
    3. Using the Live Mode 3.5 Manual configuration (continued) n Are you sure you want to connect the selected projector? The message is appeared when the wireless adapter you selected is already used for another network connection. • To connect, click [Yes]. Proceed to the 3.6 Confirm the connection
  • Hitachi X308 | Network Guide - Page 50
    stand-by mode. (The stand-by mode is the condition that the wireless connection is established, but the images are not transmitted.) The transmission can setting to My Connection]. [trouble shooting] n This projector is currently in use (Presenting) by another user. The projector you want to send
  • Hitachi X308 | Network Guide - Page 51
    3. Using the Live Mode 3.6 Confirm the connection to your destination (continued) n A Slideshow is currently running on the projector that you are trying to display to. The projector you want to send your images to is in the Slide show mode in the PC-LESS Presentation. • Click [Yes], then the
  • Hitachi X308 | Network Guide - Page 52
    , and retry the connection from the item 3.3 Quick connection to the network. (26) [trouble shooting] n The network connection is refused. The Projector has already reached the maximum number of Network Connections. The projector can connect up to 5 PCs at the same time. Click [OK], then the "Live
  • Hitachi X308 | Network Guide - Page 53
    button. (Refer to  MIU Menu in the User's Manual (detailed) - Operating Guide) from MY BUTTON function 1) Turn on the projector, and make sure that the projector image is on screen. 2) Press the MENU button on the remote control or the buttons on the projector to show the menu on screen. 3) Use
  • Hitachi X308 | Network Guide - Page 54
    menu you can configure the settings and operate the functions to send your images to the projector in the Live Mode. 3.7.1 Main menu and Operating buttons 1) Menu Type There are is stopped. NOTE • The images may not be displayed on screen, if the Start/Stop buttons are clicked repeatedly. 54
  • Hitachi X308 | Network Guide - Page 55
    last image before the button is clicked is remained on screen. You can revise the image data on your PC without showing it on the projector's screen. r Display mode button (57) The button switches the Single PC mode and Multi PC mode. t Connect button The screen to select the connection mode
  • Hitachi X308 | Network Guide - Page 56
    , but the image transmissions on hold. The network connection is established and the images on the PC are being sent to the projector. The network connection to the projector is disconnected. 2) Status Display in Multi PC mode The icon is displayed at the right end of the Display mode buttons. One
  • Hitachi X308 | Network Guide - Page 57
    on the main menu is replaced by the icon you selected. NOTE • The image transmission will be stopped, when you click the Single mode button while the projector is in the Single PC mode (Refer to  the MIU Menu in the User's Manual (detailed) - Operating Guide for the function on the projector.) 57
  • Hitachi X308 | Network Guide - Page 58
    the image quality is worse. Image quality Image quality takes priority over Speed. It makes JPEG compression rate lower. The screen on the projector is rewritten slower because the transferred data is larger, but the image quality is better. w Cursor Emulation If a mouse cursor (pointer) on your
  • Hitachi X308 | Network Guide - Page 59
    to 20 letters can be input by using alphanumeric characters. The user name can be displayed on the projector screen, so you can find out whose image is currently on the screen. (Refer to  MIU Menu in the User's Manual (detailed) - Operating Guide) If the check box is not marked, the information is
  • Hitachi X308 | Network Guide - Page 60
    network connection is often used. 3.8.2 Making Profile data The profile data is made on the Manual Configuration screen. (41) Up to 10 profile data can be stored for each network adapter ) • If you change a wireless network adapter on the projector or PC, make a new profile data for the adapter. 60
  • Hitachi X308 | Network Guide - Page 61
    3.8 Profile data (continued) 3.8.3 Editing Profile data If necessary, the profile data can be edited on the Manual Configuration screen. (41) 1) Select [Profile], and select one of the data listed in the window. 2) Click [Edit]. 3. Using the Live Mode 3) The "Edit profile" screen
  • Hitachi X308 | Network Guide - Page 62
    3. Using the Live Mode 3.8 Profile data (continued) 3.8.4 Registering My Connection One of the profile data, which is often used, can be registered as the My Connection profile data. Once the data is registered, all you need to do is to select the My Connection to connect to the network. (29) 1)
  • Hitachi X308 | Network Guide - Page 63
    ) Also, you can register a profile data to My Connection, when the network connection is established. When it is established, the "Connection to Projector successful" screen is displayed. (50) If you wish to use the current connection setting for My Connection, check in the box for [Register
  • Hitachi X308 | Network Guide - Page 64
    Management Protocol) compliant, allowing you to monitor it from a remote location using SNMP software. In addition, the projector is able to send failure & warning alerts to a specified PC. (91) Event Scheduling You can schedule the projector to perform various functions according to the date and
  • Hitachi X308 | Network Guide - Page 65
    browser software 4.1 Configuring and controlling the projector via a web browser You can adjust or control the projector via users running Internet Explorer on a Microsoft Windows version prior to Windows XP Service Pack 2 install security update Q832894 (MS04-004) or the web browser interface may
  • Hitachi X308 | Network Guide - Page 66
    passwords and other security settings. Projector Control Controls the projector. Remote Control Controls the projector like IR remote. Projector Status Displays and configures the current projector status. Network Restart Restarts the projector's network connection. Administrator User
  • Hitachi X308 | Network Guide - Page 67
    software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.1 Logon Refer to the following for configuring or controlling the projector via a web browser. Example: If the IP address of the projector ID" Fig. 4.1.1 c "Logon with User ID" 3) Click the desired operation
  • Hitachi X308 | Network Guide - Page 68
    software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.2 Network Information All screen drawings in this manual the WIRED even if the wireless network card is mounted. (MIU Menu in the User's Manual (detailed)) - Operating Guide) Firmware Date Firmware Version
  • Hitachi X308 | Network Guide - Page 69
    Mode IP Configuration DHCP ON DHCP OFF IP Address Subnet Mask Default Gateway Projector Name sysLocation (SNMP) sysContact (SNMP) DNS Server Address Description Select Network mode "Wired" or "Wireless". Configures network settings. Enables DHCP. Disables DHCP. Configures the IP address when DHCP
  • Hitachi X308 | Network Guide - Page 70
    software 4.1 Configuring and controlling the projector via a web browser (Continued) Item Wireless Mode CH (Communication channel) Description Select "AD-HOC" or "Infrastructure". Select using channel between "1" and "11". NOTE • Depending on the country where you are the channels may the series of
  • Hitachi X308 | Network Guide - Page 71
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.4 Port Settings Displays and configures communication port settings. Item Network Control Port1 (Port:23) Port open Authentication Network Control Port2 (Port:
  • Hitachi X308 | Network Guide - Page 72
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.5 Mail Settings Displays and configures e-mail addressing settings. Item Description Send mail Click [Enable] check box to use the e-mail function.
  • Hitachi X308 | Network Guide - Page 73
    Schedule Execution Error Lamp Time Alarm Filter Time Alarm Transition Detector Alarm Schedule Execution error. (75) Lamp time over Alarm Time setting. Filter time over Alarm Time setting. Transition Detector Alarm. (OPTION Menu in the User's Manual (detailed) - Operating Guide) "CHANGE THE LAMP
  • Hitachi X308 | Network Guide - Page 74
    projector screen. The e-mail will be sent when the filter timer exceeds 50, 100, 200, 300, 400, 500, 600, 700 or 800 hours based on the configuration. No notification e-mail will be sent if the FILTER MESSAGE is set to TURN OFF. (OPTION Menu in the User's Manual (detailed) - Operating Guide) • Lamp
  • Hitachi X308 | Network Guide - Page 75
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.7 Schedule Settings Displays and configures schedule settings. Item Daily Sunday Monday Tuesday Wednesday Thursday Friday Saturday Specific date No.1 Specific date No.2 Specific
  • Hitachi X308 | Network Guide - Page 76
    Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) The daily and weekly event items are shown below. Item Schedule Schedule List Daily & Weekly Description Click [Enable] check box to enable the schedule. Displays the current schedule. The specific
  • Hitachi X308 | Network Guide - Page 77
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.8 Date/Time Settings Displays and configures the date and time settings. Item Current Date Current Time Daylight Savings Time Start Month
  • Hitachi X308 | Network Guide - Page 78
    browser software 4.1 Configuring and controlling the projector via to save the settings. NOTE • If you connect the projector to an existing network, consult a network administrator before , the time difference must be set. • The projector will retrieve Date and Time information from the time
  • Hitachi X308 | Network Guide - Page 79
    software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.9 Security Settings Displays and configures passwords and other security settings. Item Administrator authority Administrator ID Administrator Password Re-enter Administrator Password User authority User
  • Hitachi X308 | Network Guide - Page 80
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) Item Network Control Authentication Password Re-enter Authentication Password SNMP Community name FTP User Password Re-enter Password Description Configures the Authentication
  • Hitachi X308 | Network Guide - Page 81
    Refer to the table below for details. NOTE • The setting value may not match with the actual value if the user changes the value manually. In that case, please refresh the page by clicking [Refresh] button. Controls the projector. Item Main Power Input Source Picture Mode Blank On/Off Mute Freeze
  • Hitachi X308 | Network Guide - Page 82
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) Item Image Aspect Over Scan V Position H Position H Phase H Size Auto Adjust Execute Input Progressive Video NR Color Space Component C-Video Format S-
  • Hitachi X308 | Network Guide - Page 83
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) Item Volume the timer to shut off the projector when no signal is detected. Assigns the functions for the MY BUTTON1 buttons on the included remote control. Assigns the functions for
  • Hitachi X308 | Network Guide - Page 84
    with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) The Service item in the Projector Control menu is shown only when you logon with the Administrator ID. The items shown in the table below can be performed using the Projector Control menu. Click
  • Hitachi X308 | Network Guide - Page 85
    software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.11 Remote Control You can use your Web browser to control the projector. • Do not attempt to control the projector with the projector's remote control and via your Web browser at the same time. It may
  • Hitachi X308 | Network Guide - Page 86
    onto the "Thumbnail mode". Selecting this item sets the projector onto the "Slide Show mode". Selecting this item sets the projector onto the "Directory mode". NOTE • The Web Remote Control does not support repeat function that performs an action while holding a button clicked down. • Since
  • Hitachi X308 | Network Guide - Page 87
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.12 Projector Status Displays and configures the current projector status. Item Error Status Lamp Time Filter Time Power Status Input Status Blank On/Off Mute Freeze Description
  • Hitachi X308 | Network Guide - Page 88
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.13 Network Restart Restarts the projector's network connection. Restart Item Description Restarts the projector's network connection in order to activate new configuration
  • Hitachi X308 | Network Guide - Page 89
    browser software 4.2 E-mail Alerts The projector can automatically send an alert message to the specified e-mail addresses when the projector detects a certain condition that is requiring maintenance or detected an error. NOTE • Up to five e-mail addresses can be specified. • The projector may be
  • Hitachi X308 | Network Guide - Page 90
    4. Management with Web browser software 4.2 E-mail Alerts (Continued) 8) Click [Alert Settings] on the main menu to configure the E-mail follows: Subject line : Text : Date Time IP Address MAC Address
  • Hitachi X308 | Network Guide - Page 91
    use this function. NOTE • It is recommended that SNMP functions be carried out by a network administrator. • SNMP management software must be installed on the computer to monitor the projector via SNMP. SNMP Settings (71) Configure the following items via a web browser to use SNMP. Example: If the
  • Hitachi X308 | Network Guide - Page 92
    4. Management with Web browser software 4.4 Event Scheduling The scheduling function enables to setup scheduled events including power on / power off. It enables to be "self-management" projector. NOTE • You can schedule the following control events: Power ON/OFF, Input Source and Transferred Image
  • Hitachi X308 | Network Guide - Page 93
    4. Management with Web browser software 4.4 Event Scheduling (Continued) Schedule Settings (75) Schedule settings can be configured from a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2)
  • Hitachi X308 | Network Guide - Page 94
    time even when the date and time have been set correctly. Replace the battery by following the instructions on replacing the battery. (Internal clock battery in the User's Manual (concise)) • The internal clock's time may not remain accurate. Using SNTP is recommended to maintain accurate time
  • Hitachi X308 | Network Guide - Page 95
    of the MIU Menu. ( MIU Menu in User's Manual (detailed) - Operating Guide) NOTE • Supported file types are JPEG, Bitmap and PNG. • It is possible to allocate the image file up to 4 in the maximum. • The image file also can be displayed by using schedule function from the web browser. Refer to the
  • Hitachi X308 | Network Guide - Page 96
    Management with Web browser software 4.6 Command Control via the Network You can configure and control the projector via the network using a web browser when command control is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar
  • Hitachi X308 | Network Guide - Page 97
    4. Management with Web browser software 4.6 Command Control via the Network (Continued) When the authentication setting is enabled, the following settings are required. (79) 7) Click [Security Settings] on the main menu. 8)
  • Hitachi X308 | Network Guide - Page 98
    4. Management with Web browser software 4.6 Command Control via the Network (Continued) Command Format Command formats differ among the different communication ports. ● TCP #23 You can use the RS-232C commands
  • Hitachi X308 | Network Guide - Page 99
    4. Management with Web browser software 4.6 Command Control via the Network (Continued) Reply byte Reply 0x1C Error code 2 bytes Reply Data 0x1D 2 bytes Reply Status code 0x1F 2 bytes Reply 0x1F Authentication Error
  • Hitachi X308 | Network Guide - Page 100
    4. Management with Web browser software 4.6 Command Control via the Network (Continued) Automatic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. Authentication The projector does not accept commands
  • Hitachi X308 | Network Guide - Page 101
    the image on the following modes. The PC-LESS Presentation can be operated on the OSD menu in the projector screen or via a web browser software in your PC connected to the projector through the network. The feature allows you to make your presentation without your PC. - Thumbnail Mode (103) - Full
  • Hitachi X308 | Network Guide - Page 102
    . Up to 2GB card is supported. • SD memory and the wireless network card cannot be inserted at the same time. • Be careful to insert and remove SD memory card and USB memory. ( Using a USB storage/Using an SD card in the User's Manual (concise)) [Supported format] • FAT12, FAT16 and FAT32 NOTE
  • Hitachi X308 | Network Guide - Page 103
    OSD menu in the projector or from a web browser software on your PC. from the OSD menu 1) Save JEPG or other supported files (102) into projector. (& Using a USB storage/Using an SD card in the User's Manual (concise)) 3) Press the MENU button on the remote control or the buttons on the projector
  • Hitachi X308 | Network Guide - Page 104
    /Using an SD card in the User's Manual (concise)) 3) Connect the projector and your PC through the network. (&11 or &16 or &26) 4) Start a web browser software and logon to the projector. (&67) 5) Select the Remote Control in the main menu to have the Remote Control screen on your PC. 6) Select
  • Hitachi X308 | Network Guide - Page 105
    control or keypad or a web browser software. The following functions can be supported while the thumbnail is displayed. The remote control PAGE UP PAGE DOWN ENTER MENU Button operation The keypad on Web Remote in web the projector browser software. UP/DOWN/LEFT/RIGHT - PAGE UP PAGE
  • Hitachi X308 | Network Guide - Page 106
    . 1) PC-LESS PRESENTATION MENU: Move the cursor to the PC-LESS PRESENTATION MENU, and push the ► cursor button on the remote control or projector, or RIGHT on the Web Remote Control. The PC-LESS PRESENTATION menu will be displayed. 2) REFLESH: Move the cursor to the REFLESH, and push the ► cursor
  • Hitachi X308 | Network Guide - Page 107
    display Fig. 5.3 Full Screen Mode The following functions can be supported in the Full screen mode. Button operation *1) The remote control The keypad on the projector Web Remote in web browser software. Functions ▲/▼ or ◄/► *2) ▲/▼ or ◄/► *2) UP/DOWN or LEFT/RIGHT *2) • Rotates image
  • Hitachi X308 | Network Guide - Page 108
    your desired size. 1) Select the DISPLAY SIZE in PC-LESS PRESENTATION menu. 2) Press the ENTER button on the remote control or ► button on the Keypad or RIGHT button on the Web Remote Control. 3) Then DISPLAY SIZE menu appears. 4) Select your desired DISPLAY SIZE. • REAL : D isplays the image at
  • Hitachi X308 | Network Guide - Page 109
    Mode The following operations can be accessible while the Slide show is displayed. The remote control ENTER MENU Button operation The keypad on the projector Web Remote in web browser software. INPUT ENTER - MENU Functions Displays thumbnail. Displays PC-LESS PRESENTATION menu. * These
  • Hitachi X308 | Network Guide - Page 110
    Slide show endless. 5) PLAY : P lay the Slide show. It is not recommend to set the interval time very short something like several seconds, because it may take more than several seconds to read and display an image file if it is stored in very deep layer directory or if so many
  • Hitachi X308 | Network Guide - Page 111
    with the projector menu. Select the DIRECTORY on the PC-LESS PRESENTATION menu. And press the ENTER / ► button on the remote control or displayed if a folder or un-supported format file is selected. If the displayable file is selected and the ENTER button on remote control is pressed, it turns
  • Hitachi X308 | Network Guide - Page 112
    directory is displayed. The remote control Button operation The keypad on the projector Web Remote in web browser software. ▲/▼ ▲/▼ UP/DOWN . Displays a selected file as a preview in full screen. The un-supported format file cannot be opened. If the preview is displayed and Enter button
  • Hitachi X308 | Network Guide - Page 113
    ("MP4 Movie") - Time stamp (When file is created) - File size (Size of File) - Movie size (File resolution) - Movie time (Play time) Un-supported format file - File format ("File") - Time stamp (When file is created) - File size (Size of File) Directory - File format ("Directory") - Time stamp
  • Hitachi X308 | Network Guide - Page 114
    5. PC-LESS Presentation 5.6 "PC-LESS Presentation" error message Error message is displayed at a specific condition while "PC-LESS Presentation" mode. It appears at the bottom and the gray area of screen. Fig. 5.6 "PC-LESS Presentation" error message "PC-LESS Presentation" error message list
  • Hitachi X308 | Network Guide - Page 115
    5. PC-LESS Presentation 5.7 Playlist The Playlist is a DOS format text file, which decides the order of displayed still image files or moving image files in the thumbnail or the slide show. The playlist file name is "imagelistdir.txt". It is created in each folder when the PC-LESS Presentation is
  • Hitachi X308 | Network Guide - Page 116
    6. Troubleshooting Problem Likely Cause Things to Check Reference Page Number No image The projector is not turned on. Is the projector's lamp on? *16 The projector's input source Is the projector switched to isn't switched to MIU. MIU? *17 Check both the PC and projector's network
  • Hitachi X308 | Network Guide - Page 117
    does not respond - Image on screen is frozen. Communication between the projector and PC is not working well. MIU Functions of the projector is not working well. Try "MIU RESTART" in SERVICE menu under the MIU menu. *12 *50 *57 11-13, 41 *56 *62 * User's Manual (detailed) - Operating Guide 117
  • Hitachi X308 | Network Guide - Page 118
    Control software Corresponding protocol Network Security PC application operational environment SD Memory Card Wireless network TKIP/AES), SSID OS: W indows® XP Home Edition/ Professional Windows® 2000 Professional Service Pack 4 CPU: Pentium III 600MHz or more is recommended. Memory size: 64MB or
  • Hitachi X308 | Network Guide - Page 119
    and after-sales service 8. Warranty and after-sales service If a problem occurs with the equipment, please read "6. Troubleshooting" (116) section first and review all suggested check points. After that, please contact your dealer or service company, if you still have the problem. They will tell
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
±
Projector
CP-X308
User's Manual (detailed)
Network Guide
Thank you for purchasing this projector.
This projector has the network function that brings you the following main features.
►Before using this product, be sure to read all manuals for this
product.
After reading them, store them in a safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
• Windows is a registered trademark of Microsoft Corporation.
All other trademarks are the properties of their respective owners.
ü
Live Mode
This projector can project your PC images on screen through wireless or wired
network, which can erase a signal cable from your desk.
ü
Quick connection to your network
No expert knowledge is required any more. Various options for network setting
give you a quick and simple connection to the network.
ü
Web control
The projector can be controlled and monitored by a web browser software on
your PC, which can help you to setup and maintain the projector.
ü
PC-LESS Presentation
This projector can project images stored in an SD memory or a USB memory
on screen, which allow you not to bring your PC with you.
This manual is only intended to explain Network functions only.
For safety, operations or any other issues, refer to the Safety Guide and User’s
Manual (concise and detailed).