Homelite HGCA3000 Quick Start Guide

Add engine lubricant.

Refer to page 13 of the

operator’s manual for more details.

HGCA3000

3000 WATT GENERATOR

Add fuel.

Refer to page 13 of the operator’s manual for

more details.

987000-991

5-25-10 (REV:01)

Start the engine.

Refer to page 14 of the operator’s

manual for more details.



Unplug all loads from the generator.



Turn the fuel valve to the ON position (

A

).



Put the engine switch in the ON position (

B

).



Move choke lever right (

C

).



Grasp the recoil starter (

D

) and pull slowly until

resistance

is felt. Give the recoil starter a short, brisk pull to

start the engine.



Let engine run for several seconds, then move

choke lever left (

E

).

1

2

3

DO NOT RETURN TO THE STORE!

If you have any questions, please call: 1-800-242-4672

or visit our website at www.homelite.com

Product style and configuration may vary

.

2

Install wheels.

Refer to page 12 of the operator’s

manual for more details.

Install feet.

Refer to page 11 of the operator’s manual

for more details.

1

3

Install handles.

Refer to page 12 of the operator’s

manual for more details.

Pointed away from

dwelling openings

WARNING:

Do not connect to a building’s electri

-

cal system unless the generator and transfer switch have

been properly installed and the electrical output has been

verified by a qualified electrician.

WARNING:

This Quick Start Guide is not a substitute for reading the operator’s manual. To reduce the risk of injury or death, user must read and understand operator’s manual before using this product.

ASSEMBLY GUIDE

QUICK START GUIDE

A

B

D

E

C

D