Honeywell 1-Heat/1-Cool Owner's Manual

Honeywell 1-Heat/1-Cool - TH5110D1022 Large R Manual

Get Honeywell 1-Heat/1-Cool - TH5110D1022 Large R PDF manuals and user guides View all Honeywell 1-Heat/1-Cool manuals
Add to My Manuals
Save this manual to your list of manuals

Honeywell 1-Heat/1-Cool manual content summary:

  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 1
    Operating Instructions TH5110D Non-programmable Thermostat OPERATING INSTRUCTIONS The TH5110D Thermostat provides electronic control of 24 Vac singlestage heating and cooling systems or 750 mV heating systems. For assistance with your Honeywell product please visit www.honeywell.com/yourhome or
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 2
    Get to Know Your Thermostat 4 Thermostat 4 Display 5 Operate Your Thermostat 6 Set System Setting 6 Set Fan Setting 7 Change Temperature Setting 8 Replace Batteries 9 Review Battery Tips 13 Built-in Compressor Protection 14 Auto Changeover 15 Replacement Part 19 Troubleshooting Tips 20
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 3
    , Backlit Display: Easy-to-see and read-even in the dark. • Precise Comfort Control: ±1ºF of your set temperature. • Simplified Operation: Soft-key controls. Simultaneously displays both room temperature and temperature setting. • Easy Change Battery Holder. • Built-in Compressor Protection: Minimum
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 4
    Get to Know Your Thermostat Thermostat DIGITAL DISPLAY BATTERY HOLDER LATCH PRESS TO RELEASE BATTERY HOLDER Inside SetCtinogol Fan Auto SysteCmool On Cool PRESS BATTERY HOLDER TWO AAA ALKALINE BATTERIES TEMPERATURE SETTING BUTTON RAISES TEMPERATURE SETTING FAN BUTTON SELECTS AUTO OR ON
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 5
    TEMPERATURE INDICATES BATTERIES ARE LOW AND MUST BE REPLACED Inside Replace Battery HeatCool Setting TEMPERATURE SETTING Fan On Auto Heat On Cool On System Heat Cool AutoOff INDICATES THERMOSTAT IS "CALLING" FOR HEAT OR COOL CURRENT FAN SETTING CURRENT SYSTEM SETTING M22083 69-1713 5
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 6
    System button to select Heat, Off, Cool or Auto: Heat-Thermostat controls the heating system. Off-Both the heating and cooling systems are off. Cool-Thermostat controls the cooling system. Auto-Thermostat automatically changes between heating and cooling operation, depending on indoor temperature
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 7
    Operate Your Thermostat (Cont) Set Fan Setting Press the Fan button to select Auto or On: Auto-Normal setting for most homes. The fan runs only when the heating or cooling system is on. On-The fan runs continuously. Use this setting for improved air circulation or for more efficient air cleaning.
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 8
    temperature setting. Inside Replace Batt Service Needed Cool On Fan System Auto Cool TEMPERATURE SETTING PRESS THIS BUTTON TO RAISE THE TEMPERATURE SETTING PRESS THIS BUTTON TO LOWER THE TEMPERATURE SETTING TEMPERATURE SETTING RANGE: HEAT: 40°TO 90°F (4.5°T0 32°C) COOL: 50°TO 99°F (10°T0
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 9
    , replace batteries promptly with two fresh AAA alkaline batteries. REPLACE BATTERY INDICATOR Inside Replace Battery Cool Setting Service Needed Fan System Auto Cool M22110 The thermostat does not lose any settings when the batteries are replaced; all settings are permanently stored in
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 10
    Replace Batteries (Cont) 2. Press the battery holder latch to release the battery holder. 3. Remove the battery holder from the thermostat. BATTERY HOLDER LATCH BATTERY HOLDER Inside Replace Battery Service Needed Fan System Auto Cool M22111 10 69-1713
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 11
    Replace Batteries (Cont) 4. Remove the old batteries and insert two fresh AAA alkaline batteries as marked on the battery holder. BATTERY HOLDER PUSH BATTERIES OUT THROUGH THIS HOLE BATTERY DIRECTION M22017 69-1713 11
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 12
    Replace Batteries (Cont) 5. Insert battery holder as shown. Battery Tips BATTERY HOLDER LATCH BATTERY HOLDER Inside Replace Battery Service Needed Fan System Auto Cool M22111 12 69-1713
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 13
    Review Battery Tips 1. Replace the batteries as soon as Replace Battery flashes can leak, causing damage to the thermostat. 3. Although the thermostat has a Replace Battery indicator, replace the batteries once per year to prevent the thermostat and heating/cooling system from shutting down due to a
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 14
    is activated after the compressor turns off. If there is a call during the minimum-off timer, the thermostat flashes "Cool On" or "Heat On" a in the display. When the minimum-off timer expires, "Cool On" or "Heat On"a appears solidly in the display and the compressor and the fan turn on. _________
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 15
    only if the thermostat is set up for Auto Changeover by your heating and air conditioning dealer. In some installations, Auto may be the only system selection. The following pages in this Auto Changeover section provide an example of how to change both the cool and heat temperature settings when
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 16
    the System setting to Auto. Replace Batt Service Needed Cool On Fan System Auto Cool PRESS THE SYSTEM BUTTON TO CHANGE SYSTEM SETTING TO AUTO. M22113 The Auto setting appears only if the thermostat is set up for Auto Changeover by your heating and air conditioning dealer. 16 69-1713
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 17
    button to raise or lower the cool temperature setting. 3. Press the Select Heat/Cool button to display the Heat temperature setting. "Select Heat/Cool" flashes for six seconds. Replace Batt Service Needed Fan Auto Select Heat/Cool SELECT HEAT/ COOL BUTTON TEMPERATURE SETTING PRESS THIS BUTTON
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 18
    to raise or lower the heat temperature setting. 5. "Select Heat/Cool" stops flashing six seconds after the last button press. The thermostat then returns to displaying "Auto" for the System setting. Inside Heat Setting Service Needed Fan Auto Select Heat/Cool TEMPERATURE SETTING PRESS THIS
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 19
    Replacement Part 1. Replacement Battery Holder- Part number 50000951-001 Battery Holder. To order, call your heating and air conditioning dealer or call Honeywell Customer Care at 1-800-468-1502. M22018 69-1713 19
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 20
    be sure it is not tripped. • Check power switch at heating and/or cooling system to be sure it is on. • Check furnace door to be sure it is closed securely. • If you use batteries, check that fresh AAA alkaline batteries are installed as marked on the battery holder. Temperature Check that the
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 21
    and cooling contractor. "Heat On" is Set System setting to Heat and set the not shown in temperature setting above the room the display. temperature. If "Heat On" is shown solidly in the display, but the heating system does not turn on, see "Heating system does not turn on" in Troubleshooting Tips
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 22
    not shown in temperature setting below the room the display. temperature. If "Cool On" is shown solidly in the display, but the cooling system does not turn on, see "Cooling system does not turn on" in Troubleshooting Tips. "Heat On" is Compressor minimum-off timer is active. flashing in Wait up
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 23
    For assistance with your Honeywell product, please visit www.honeywell.com/yourhome or call Honeywell Customer Care toll free at 1-800-468-1502. Before calling, please have the thermostat model number and date code available. MODEL NUMBER xxxxxxxx DATE CODE xxxxxx THERMOSTAT BATTERY HOLDER 69
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 24
    or materials, under normal use and service, for a period of five (5) years from the date of purchase by the consumer. If, at any time during the warranty period, the product is defective or malfunctions, Honeywell shall repair or replace it (at Honeywell's option) within a reasonable period of time
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 25
    Warranty (Cont) THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES to state. If you have any questions concerning this warranty, please write Honeywell Customer Relations, 1985 Douglas Dr, Golden Valley, MN 55422 or call 1-800-4681502.
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 26
    26 69-1713
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 27
    69-1713 27
  • Honeywell 1-Heat/1-Cool | Owner's Manual - Page 28
    Automation and Control Solutions Honeywell International Inc. Honeywell Limited-Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Scarborough, Ontario M1V 4Z9 69-1713 G.H. 5-04 www.honeywell.com/yourhome
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
OPERATING INSTRUCTIONS
Patents Pending
fi U.S. Registered Trademark
' 2004 Honeywell International Inc.
All Rights Reserved
69-1713
Operating Instructions
TH5110D
Non-programmable Thermostat
The TH5110D Thermostat provides electronic control of 24 Vac single-
stage heating and cooling systems or 750 mV heating systems.
For assistance with your Honeywell product please visit
www.honeywell.com/yourhome
or call Honeywell Customer Care
toll free at 1-800-468-1502.
Read and Save these Instructions