Honeywell 3800G14E User Manual - Page 15

Honeywell 3800G14E Manual

Page 15 highlights

1 Getting Started About This Manual This User's Guide provides installation and programming instructions for the 3800g. Product specifications, dimensions, warranty, and customer support information are also included. Hand Held Products bar code imagers are factory programmed for the most common terminal and communications settings. If you need to change these settings, programming is accomplished by scanning the bar codes in this guide. An asterisk (*) next to an option indicates the default setting. Unpacking the Imager After you open the shipping carton containing the 3800g, take the following steps: • Check to make sure everything you ordered is present. • Save the shipping container for later storage or shipping. • Check for damage during shipment. Report damage immediately to the carrier who delivered the carton. 3800g Models Note: The Hand Held Products 3800g imager may be used with many interfaces, which are described in this User's Guide. Refer to the chart below to determine the models that can be used with your interface. Refer to Chapter 6 for programming information regarding Secondary Interfaces. The chart below lists the 3800g imager models. Models 3800G04E, 3800G14E 3800G05E, 3800G15E Primary Interfaces TTL level RS-232, USB, Keyboard wedge TTL level RS-232, IBM Retail, USB, Retail USB, Keyboard wedge Secondary Interfaces TTL level RS-232 TTL level RS-232 3800g User's Guide 1-1




Type your new search above

The manual viewer requires the flash plugin to be installed and enabled.
To view this page ensure that Adobe Flash Player version 10 or greater is installed.

Honeywell 3800G14E Manual