Honeywell 3800G14E User Manual - Page 23
Terminal Interfaces, Terminal ID
View all Honeywell 3800G14E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
2 Terminal Interfaces Terminal ID If your interface is not a standard PC AT, refer to Terminal ID, beginning on page 2-1 and locate the Terminal ID number for your PC. Scan the Terminal ID bar code below, then scan the numeric bar code(s) from the Programming Chart inside the back cover of this manual to program the imager for your terminal ID. Scan Save to save your selection. For example, an IBM AT terminal has a Terminal ID of 003. You would scan the Terminal ID bar code, then 0, 0, 3 from the Programming Chart inside the back cover of this manual, then Save. If you make an error while scanning the digits (before scanning Save), scan the Discard code on the Programming Chart, scan the Terminal ID bar code, scan the digits, and the Save code again. Terminal ID Save Note: After scanning one of these codes, you must power cycle your computer. 3800g User's Guide 2 - 1