Honeywell 3800G14E User Manual - Page 29
RS-232 Baud Rate
View all Honeywell 3800G14E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Automatic Direct Connect Mode: This selection can be used if you have an IBM AT style terminal and the system is dropping characters. Default = Off Automatic Direct Connect Mode On * Automatic Direct Connect Mode Off RS-232 Baud Rate Baud Rate sends the data from the imager to the terminal at the specified rate. The host terminal must be set for the same baud rate as the imager. Default = 115,200. 300 1200 4800 19200 57,600 600 2400 9600 38400 * 115,200 3800g User's Guide 2 - 7
3800g User’s Guide
2 - 7
Automatic Direct Connect Mode:
This selection can be used if you have an
IBM AT style terminal and the system is dropping characters.
Default = Off
RS-232 Baud Rate
Baud Rate sends the data from the imager to the terminal at the specified rate.
The host terminal must be set for the same baud rate as the imager.
Default = 115,200
.
Automatic Direct
Connect Mode On
* Automatic Direct Connect
Mode Off
300
2400
600
1200
4800
38400
9600
19200
* 115,200
57,600