Honeywell 3800G14E User Manual - Page 37
Hands Free Time-Out, Reread Delay
View all Honeywell 3800G14E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Hands Free Time-Out The Automatic Trigger and Presentation Modes are referred to as "hands free" modes. If the imager's trigger is pulled when using a hands free mode, the imager changes to manual trigger mode. You can set the time the imager should remain in manual trigger mode by setting the Hands Free Time-Out. Once the time-out value is reached, (if there have been no further trigger pulls) the imager reverts to the original hands free mode. Scan the Hands Free Time-Out bar code, then scan the time-out duration (from 0-300,000 milliseconds) from the inside back cover, and Save. Default = 5,000 ms. Hands Free Time-Out Reread Delay This sets the time period before the imager can read the same bar code a second time. Setting a reread delay protects against accidental rereads of the same bar code. Longer delays are effective in minimizing accidental rereads at POS (point of sale). Use shorter delays in applications where repetitive bar code scanning is required. Default = Medium. Reread Delay only works when in automatic trigger mode or presentation mode (see page 3-4). Short (500 ms) Long (1000 ms) * Medium (750 ms) Extra Long (2000 ms) 3800g User's Guide 3 - 5