Honeywell 3800G14E User Manual - Page 44
Video Reverse
View all Honeywell 3800G14E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
If you want a different notation than "NR," for example, "Error," or "Bad Code," you can edit the output message using the Data Formatter (page 5-5). The hex code for the No Read symbol is 9C. Video Reverse Video Reverse is used to allow the imager to read bar codes that are inverted. The "Off" bar code below is an example of this type of bar code. Note: If additional menuing is required, Video Reverse must be disabled to read the menu bar codes and then re-enabled after menuing is completed. On * Off 3 - 12 3800g User's Guide
3 - 12
3800g User’s Guide
If you want a different notation than “NR,” for example, “Error,” or “Bad Code,”
you can edit the output message using the
Data Formatter
(page 5-5).
The hex
code for the No Read symbol is 9C.
Video Reverse
Video Reverse is used to allow the imager to read bar codes that are inverted.
The “Off” bar code below is an example of this type of bar code.
Note:
If additional menuing is required, Video Reverse must be disabled to read
the menu bar codes and then re-enabled after menuing is completed.
On
*
Off