Honeywell 3800G14E User Manual - Page 63
Codabar, Codabar Start / Stop Characters, Codabar Check Character
View all Honeywell 3800G14E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Codabar Codabar * On Off Codabar Start/Stop Characters Start/Stop characters identify the leading and trailing ends of the bar code. You may either transmit, or not transmit Start/Stop characters. Default = Don't Transmit. Transmit * Don't Transmit Codabar Check Character Codabar check characters are created using different "modulos." You can program the imager to read only Codabar bar codes with Modulo 16 check characters. Default = No Check Character. No Check Character indicates that the imager reads and transmits bar code data with or without a check character. When Check Character is set to Validate and Transmit, the imager will only read Codabar bar codes printed with a check character, and will transmit this character at the end of the scanned data. 3800g User's Guide 7 - 3