Honeywell 3800G14E User Manual - Page 64
Codabar Concatenation, Validate, but Don't Transmit
View all Honeywell 3800G14E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
When Check Character is set to Validate, but Don't Transmit, the unit will only read Codabar bar codes printed with a check character, but will not transmit the check character with the scanned data. * No Check Character Validate Modulo 16 and Transmit Validate Modulo 16, but Don't Transmit Codabar Concatenation Codabar supports symbol concatenation. When you enable concatenation, the imager looks for a Codabar symbol having a "D" start character, adjacent to a symbol having a "D" stop character. In this case the two messages are concatenated into one with the "D" characters omitted. Default = Off. Character Start Stop Start Stop Codabar A12D D34A Select Require to prevent the imager from decoding a single "D" Codabar symbol without its companion. This selection has no effect on Codabar symbols without Stop/Start D characters. On Require * Off 7 - 4 3800g User's Guide