Honeywell 3800G14E User Manual - Page 66
Code 39 Check Character, Code 39 Message Length, Validate, but Don't Transmit, Validate and Transmit
View all Honeywell 3800G14E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Code 39 Check Character No Check Character indicates that the imager reads and transmits bar code data with or without a check character. When Check Character is set to Validate, but Don't Transmit, the unit only reads Code 39 bar codes printed with a check character, but will not transmit the check character with the scanned data. When Check Character is set to Validate and Transmit, the imager only reads Code 39 bar codes printed with a check character, and will transmit this character at the end of the scanned data. Default = No Check Character. * No Check Character Validate, but Don't Transmit Validate and Transmit Code 39 Message Length Scan the bar codes below to change the message length. Refer to Message Length on page 7-2 for additional information. Minimum and Maximum lengths = 0-48. Minimum Default = 0, Maximum Default = 48. Minimum Message Length Maximum Message Length 7 - 6 3800g User's Guide