Honeywell 3800G14E User Manual - Page 70
Interleaved 2 of 5 Message Length, Validate, but Don't Transmit, Validate and Transmit
View all Honeywell 3800G14E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
When Check Digit is set to Validate, but Don't Transmit, the unit only reads Interleaved 2 of 5 bar codes printed with a check digit, but will not transmit the check digit with the scanned data. When Check Digit is set to Validate and Transmit, the imager only reads Interleaved 2 of 5 bar codes printed with a check digit, and will transmit this digit at the end of the scanned data. Default = No Check Digit. * No Check Digit Validate and Transmit Validate, but Don't Transmit Interleaved 2 of 5 Message Length Scan the bar codes below to change the message length. Refer to Message Length on page 7-2 for additional information. Minimum and Maximum lengths = 2-80. Minimum Default = 4, Maximum Default = 80. Minimum Message Length Maximum Message Length 7 - 10 3800g User's Guide