Honeywell 3800G14E User Manual - Page 83
EAN/JAN 13 Check Digit, EAN/JAN 13 Addenda, EAN/JAN 13 Addenda Required, Default = On.
View all Honeywell 3800G14E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
EAN/JAN 13 Check Digit This selection allows you to specify whether the check digit should be transmitted at the end of the scanned data or not. Default = On. * On Off EAN/JAN 13 Addenda This selection adds 2 or 5 digits to the end of all scanned EAN/JAN 13 data. Default = Off for both 2 Digit and 5 Digit Addenda. 2 Digit Addenda On * 2 Digit Addenda Off 5 Digit Addenda On * 5 Digit Addenda Off EAN/JAN 13 Addenda Required When Addenda Required is set to on, the imager will only read EAN/JAN 13 bar codes that have addenda. Default = Not Required. Required * Not Required 3800g User's Guide 7 - 23
3800g User’s Guide
7 - 23
EAN/JAN 13 Check Digit
This selection allows you to specify whether the check digit should be transmitted
at the end of the scanned data or not.
Default = On.
EAN/JAN 13 Addenda
This selection adds 2 or 5 digits to the end of all scanned EAN/JAN 13 data.
Default = Off for both 2 Digit and 5 Digit Addenda.
EAN/JAN 13 Addenda Required
When Addenda Required is set to on, the imager will only read EAN/JAN 13 bar
codes that have addenda.
Default = Not Required.
Off
*
On
* 5 Digit Addenda Off
5 Digit Addenda On
* 2 Digit Addenda Off
2 Digit Addenda On
*
Not Required
Required