Honeywell 5834-4 Programming Guide

– 1 –

Provided by Tech Support

Created/Updated on 5/14/07 11:47:00 AM

5805-6_StepByStep.doc

5805-6 Programming

Loops and Serial Numbers

The 5805-6 has 2 unique serial numbers.

The First Serial number is on the Sticker on the unit. The Second serial

number is not located on the unit; it is merely 1 digit higher than the first.

E.g. Serial number #1 is 000-8882, the

second would be 000-8883.

Each serial number has 4 loops.

This would be like having 2 keyfobs in one.

Each

loop number will utilize its own zone, so 8 zones will be needed to program all button functions.

The zone types of

the zones will determine what each button or button combination will do.

8 Loops, 2 Serial Numbers:

Button 1 = serial number 1, loop 3

Button 2 = serial number 1, loop 2

Button 3 = serial number 1, loop 4

Button 4 = serial number 1, loop 1

Button 5 = serial number 2, loop 3

Button 6 = serial number 2, loop 2

Button 7 (combo) = serial number 2, loop 1

Button 8 (combo) = serial number 2, loop 4

Below is a screen shot of what the programming would look like in the Compass software.

7 - Disarm

5 - Hold Up

3 - Side Light

1 - Arm Away

2 - Arm Stay

4 - Front Light

6 - Medical

8 - Aux Lights

5. Serial # 2, L3

3. Serial # 1, L4

1. Serial # 1, L3

7. Serial # 2, L1

Disarm

2. Serial # 1, L2

4. Serial # 1, L1

6. Serial # 2, L2

8. Serial # 2, L4