Honeywell HD4-WK Installation Instructions
Honeywell HD4-WK Manual
 |
View all Honeywell HD4-WK manuals
Add to My Manuals
Save this manual to your list of manuals |
Honeywell HD4-WK manual content summary:
- Honeywell HD4-WK | Installation Instructions - Page 1
HD4-WK Wall Mount Install Guide A 1 2 3 B 4 C 3 B Parts list: 1 - Pendant arm 2 - Adapter plate (supplied) 3 - #8-32 base assembly screws (x4, supplied) 4 - #8-32 security screws (x4, supplied) Installation instructions: A Pull the power/video cables from the wall though the pendant arm, then - Honeywell HD4-WK | Installation Instructions - Page 2
Video Systems www.honeywellvideo.com +1.800.796.CCTV (North America only) Document 900.0704 03/06 Rev 1.01 © 2006 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell Video Systems. The information in
-
1 -
2
 |
 |
Document 900.0704 –
03/06 – Rev 1.01
HD4-WK Wall Mount Install Guide
B
C
2
3
4
Parts list:
1 - Pendant arm
2 - Adapter plate (supplied)
3 - #8-32 base assembly screws
(x4, supplied)
4 - #8-32 security screws (x4, supplied)
Installation instructions:
Pull the power/video cables from the wall
though the pendant arm, then connect the
cables to your camera. Mount the arm on the
wall, using mounting screws appropriate to
your installation.
Screw the HD4VC4HR base tightly onto the
pendant arm and adapter plate with the four
#8-32 screws supplied.
Set up your camera to the desired field of
view. For detailed information, please refer to
the
HD4VC4HR Vandal Fixed Dome Camera
User Guide
.
Secure the HD4VC4HR dome lid to the base
with the four #8-32 security screws supplied
with the camera.
A
B
C
1
A
B
3
3
Dimensions:
8.5
”
(216.5 mm)
5.7
”
(145.0
3.54
”
(90 mm)
2.2” (56 mm)