Honeywell HD73 Operation Manual

Honeywell HD73 Manual

Get Honeywell HD73 PDF manuals and user guides View all Honeywell HD73 manuals
Add to My Manuals
Save this manual to your list of manuals

Honeywell HD73 manual content summary:

  • Honeywell HD73 | Operation Manual - Page 1
    I Honeywell O READ AND KEEP THIS OPERATION MANUAL Honeywell HD7 3 Series Operation Manual Vandal-Resistant Dome Camera DiSgrtireiTtal_ www.honeywellvideo.com
  • Honeywell HD73 | Operation Manual - Page 2
    . The exclamation point within an equilateral triangle is intended to alert the user to the presenceofimportant operatingand maintenance- (servicing) instructions in the literature accompanying the appliance. THE GRAPHIC SYMBOLSWITH SUPPLEMENTALMARKINGARE ONTHE Harrow' OF THE SYSTEM. "WARNING-TO
  • Honeywell HD73 | Operation Manual - Page 3
    frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in rain or moisture. This installation shouldbe made by a qualified service person and should abide to alllocal codes. 2 3
  • Honeywell HD73 | Operation Manual - Page 4
    • Thank you for purchasing this COLOR VIDEO CAMERA. Before using this camera, please read this operation manual carefully to obtain the best result and keep this manual for future reference. 1. SAFETY INSTRUCTIONS 2. PRECAUTIONS 3. FEATURES 4. COMPOSITION 6 5. INSTALLATION °4 5 6. CONNECTIONS
  • Honeywell HD73 | Operation Manual - Page 5
    product. Use only with a cart or stand recommended by the manufacturer, or sold with the product. Mounting should follow the manufacturers instructions, and should use a mounting accessory recommended by manufacturer. Power source This product should be operated only from the type of power source
  • Honeywell HD73 | Operation Manual - Page 6
    with care in order to that moisture and dust do not enter the camera. Installation and storage O Do not point the camera at the sun. This could damage the camera whether it is operating or not. O Do not install the camera where the temperature could exceed the allowable range. Be sure the ambient
  • Honeywell HD73 | Operation Manual - Page 7
    3-Axis 3. FEATURES High Sensitivity 1/3 Inch Sony Super HAD CCD Min. Illumination (F1.2, 30 IRE) : 0.3 Lux (Color) 0.0 Lux (IR LED On) Day & Night (ICR) OSD (On Screen Display) High Performance Menus For Functions • Privacy Zone Selectable (4 Programmable Zone) • Motion Detection Selectable (64
  • Honeywell HD73 | Operation Manual - Page 8
    4. COMPOSITION L-Wrench Operation Manual erforereo" Mounting Screw EMIR 3-.03 Service Monitor Cable Guide Pattern
  • Honeywell HD73 | Operation Manual - Page 9
    out power / video wires to the connecting places. O Fixed the camera to a ceiling using four screws. O Adjust desired focus and scene by turning and moving the 3-axis camera bracket by hand. O Put the dome cover over the base. O Fix the dome cover on the base by L-Wrench. Guide Pattern Dome Base
  • Honeywell HD73 | Operation Manual - Page 10
    3-Axi 6. CONNECTION 810 Video (Yellow) Power- 12VDC (Red) Video Output GND e -C 0 • The wire is polarized. • Use 12V DC = power source. No. Function Terminal Color #1 Video Output Yellow #2 Power Input Red Remark 1.0 Vp-p 12VDC (10V-15V), 360mA (Max)
  • Honeywell HD73 | Operation Manual - Page 11
    • O fib • • • O Camera Lay -out Tilt rotation: Adjusting the vertical angle. Pan rotation: Adjusting the horizontal angle. Horizontal rotation: Adjusting the horizontal position of the screen. Focus handle: Focus (Far or Near) Zoom handle: Zoom (Tele or Wide) IR LED(3.8mm-9.5mm): 850nm/ 30°(20EA
  • Honeywell HD73 | Operation Manual - Page 12
    8. OPERATING CAMERA CAMERA ID LENS SHUTTER WHITE BAL. FUNCTION ADJUST 8 112 LANGUAGE RESET EXIT • ON • MANUAL • AUTO • FLK • ATW • AWB • BLC • MIRROR • CONTRAST • CB_GAIN • ENGLISH • KOREAN • OFF • VIDEO • DC • FIXED • MANUAL • FIXED • MANUAL • AGC • PRIVACY • GAMMA •
  • Honeywell HD73 | Operation Manual - Page 13
    down, left & right to control the OSD functions. ts an U • 0 . - 141 DOWN MENU SET SET BY JOY STICK Jul t „,P Service Monitor Connecter: Use service monitor connector to set camera angle & focus when installing. SETUP - Push and hold MENU button 1 second to access the setup mode. • Select the
  • Honeywell HD73 | Operation Manual - Page 14
    UP, DOWN button. 3. Set details using LEFT, RIGHT button. 4. Select "Exit" and then press the MENU button to finish the SETUP (Save and Exit) SETUP CAMERA ID LENS SHUTTER WHITE BAL. FUNCTION ADJUST LANGUAGE RESET EXIT OFF DC / FIXED / ATW ENGLISH
  • Honeywell HD73 | Operation Manual - Page 15
    ID setup (default setting OFF) ® Press MENU key in ON / state. (Access ID setting MODE) e Press MENU key in CAMERA ID. ID SETUP © Character is changed each time UR DOWN is CAMERA ID pressed. (Can select up to 63 letters) A C ® Press MENU button in / to exit from ID setup mode -POSITION
  • Honeywell HD73 | Operation Manual - Page 16
    0 Main Menu - LENS 1) LENS setup ® Press LEFT or RIGHT button in LENS on Main Menu to select the mode to MANUAL VIDEO DC /. U n• Setting Mode : DC / LENS DC 2) DC LENS setup ® Press MENU button in DC / to display the screen on the right side. BRIGHTNESS : RETURN ® Use
  • Honeywell HD73 | Operation Manual - Page 17
    0 Menu [SHWTERJ- SHUTTER AUTO 1) SHUTTER setup (tor LENS MANUAL) CI Press LEFT or RIGHT button in SHUTTER to select the mode to AUTO / 4 ► FLK 4 ► FIXED / 4 ►MANUAL1. C 1/4 b+ Setting Mode: FIXED / SHUTTER AUTO BRIGHTNESS 056 / RETURN
  • Honeywell HD73 | Operation Manual - Page 18
    0 Menu(SHUTTER]- FIXED Mode Setup 1) FIXED / setup (MANUAL,DC,VIDEO LENS) ® Press MENU button in FIXED / to display the screen on the right side. e Press LEFT or RIGHT button in SHUTTER. Can be set in ([
  • Honeywell HD73 | Operation Manual - Page 19
    , RIGHT button to select the mode you wish to operate ATW 4 ► AWB 4 ► FIXED / ► MANUAL /. 2) FIXED / setup CI Can set from MODE 1 to MODE 4. 3) MANUAL / setup ® As shown on the lower right picture, set Red and Blue color value temperature. ® Press MENU button in RETURN to exit from setup mode. AWB
  • Honeywell HD73 | Operation Manual - Page 20
    0 Main Menu - FUNCTION 1) FUNCTION / setup ® Press MENU button in FUNTION to show the OSD display on the right. 2) Select item using UP, DOWN button. 3) Set details using LEFT, RIGHT button. 4) Click "Return" to go to MAIN SETUP FUNCTION BLC OFF AGC ON / PRIVACY OFF MIRROR OFF GAMMA 0.45
  • Honeywell HD73 | Operation Manual - Page 21
    3 Menu [FUNCTION] - BLC 1 1) BLC SETUP MODE ® Press MENU button in BLC ON , to display the screen on the right side. BLC SETUP BLC AREA / 2) BLC AREA / setup BLC RATIO 16 CI Use UP, DOWN, LEFT, RIGHT button to move the AREA setup position. RETURN ® Set or release BLC AREA using MENU button.
  • Honeywell HD73 | Operation Manual - Page 22
    0 Menu [FUNCTION] - BLC 2 1) BLC AREA MODE ® Exit from BLC AREA MODE to move to BLC SETUP MODE screen. 2) BLC OSD description ® ALL CLEAR - Clear all set AREA e ALL SET - Set all 64 BLC AREA (3) RETURN - Return to BLC AREA setup mode. ® EXIT - Save AREA and return to BLC SETUP MODE. INEMEMII
  • Honeywell HD73 | Operation Manual - Page 23
    Menu [FUNCTION] - BLC 3 1) BLC RATIO setup (BLC LEVEL value setup) CI Use UP,DOWN button to move to BLC RATIO. ® Use LEFT, RIGHT button to change BLC LEVEL value (0-63) O:MIN , 63:MAX e Press MENU button in RETURN to move to FUNCTION MODE. BLC SETUP BLC AREA / BLC RATIO 16 RETURN 0 23i
  • Honeywell HD73 | Operation Manual - Page 24
    Menu [FUNCTION] - AGC a 1) AGC setup AGC default setting ON / e Press MENU button in ON / to display the screen on the right side. • Use LEFT, RIGHT button to adjust AGC GAIN value (0-255) O:MIN , 255:MAX ® Press MENU button to return to the previous screen. g1 24
  • Honeywell HD73 | Operation Manual - Page 25
    - Change right portion of each AREA size. TOP - Change top portion of each AREA size. © BOTTOM - Change bottom portion of each AREA size. P COLOR - Change entire color of the AREA (16COLOR) FUNCTION BLC AGC PRIVACY MIRROR GAMMA MOTION RETURN ON/ ON/ ON / OFF 0.45 OFF PRIVACY AREA SEL AREA STATE
  • Honeywell HD73 | Operation Manual - Page 26
    0 Menu [FUNCTION] - MIRROR MN_ 1) MIRROR setup ® MIRROR default setting OFF ON setting - Use LEFT, RIGHT button. ® Left and Right side is switched as shown on the picture. GO A 0 FUNCTION BLC OFF AGC ON / PRIVACY OFF MIRROR OFF GAMMA 0.45 MOTION OFF RETURN CID
  • Honeywell HD73 | Operation Manual - Page 27
    Menu [FUNCTION] - GAMMA 0 1) GAMMA setup (DEFAULT 0.45) ® In FUNCTION MODE, use UR DOWN button to select GAMMA. ® Use LEFT, RIGHT button to adjust GAMMA value. (USER 4 0 0.05 4 0 0.10 4 ►0.15 - 1.0) FUNCTION BLC OFF AGC ON / PRIVACY OFF MIRROR OFF GAMMA 0.45 MOTION OFF RETURN 2 1s`
  • Honeywell HD73 | Operation Manual - Page 28
    0 Menu [FUNCTION] - MOTION 1) MOTION DETECTIVE setup ® DEFAULT value OFF e In ON , press MENU button. (3) Display MOTION details. 2) AREA / setup ® In AREA / , press MENU button. (see p.29) 3) MOTION TH. Setup ® Set motion sensitivity 0(MAX)-255(MIN) 4) MOTION TRACE setup ® ON : Display motion
  • Honeywell HD73 | Operation Manual - Page 29
    0 Menu [FUNCTION] - MOTION AREA I 1) MOTION AREA setup ® Use UP, DOWN, LEFT, RIGHT button to move AREA setting position. ® Use MENU button to set and release AREA. ® Press MENU button for more than 1 second to move to MOTION AREA MODE 2) MOTION AREA MODE ® You will return to MOTION AREA MODE after
  • Honeywell HD73 | Operation Manual - Page 30
    3 Menu [FUNCTION] - MOTION AREA 2 1) MOTION OSD description ® ALL CLEAR - Release all set AREA e ALL SET - Set all 64 MOTION AREA. (3) RETURN - Return to MOTION AREA Setup Mode. ® EXIT - Save AREA and return to MOTION SETUP MODE. 6 8
  • Honeywell HD73 | Operation Manual - Page 31
    . RIGHT button. 2) CONTRAST setup C) Adjust 1,-gain value (0 -255) 3) SHARPNESS setup 0 Adjust aperture value (0-31) 4) CB_GAIN setup C) Adjust COLOR CB_GAIN value (0-255) 5) CR_GAIN setup ® Adjust COLOR CR_GAIN value (0-255) ADJUST CONTRAST 083 SHARPNESS 12 CB_GAIN 190 CB_GAIN 205 RETURN
  • Honeywell HD73 | Operation Manual - Page 32
    ENGLISH e After selecting LANGUAGE, change setting using LEFT or RIGHT button. © Choose the language mode you wish to operate in. SETUP CAMERA ID LENS SHUTTER WHITE BAL. FUNCTION ADJUST LANGUAGE RESET EXIT OFF DC / FIXED / ATW ENGLISH yr ENGLISH 4 ► Korean 4 ► Chlnesel 4 ► Chinese 2 4 ► Japanese
  • Honeywell HD73 | Operation Manual - Page 33
    RESET 1) RESET ® Select RESET. Press MENU button. The screen on the bottom appears. ® Select YES or NO. © Select YES to reset your camera to default factory condition SETUP CAMERA ID LENS SHUTTER WHITE BAL. FUNCTION ADJUST LANGUAGE RESET EXIT OFF DC / FIXED / APN ENGLISH LOAD DEFAULT YES NO 33
  • Honeywell HD73 | Operation Manual - Page 34
    Video Output Sync. System Luminance S/N Ratio Horizontal Resolution Min. Illumination (F1.2) Lens Focus Electronic Shutter White Balance Camera 530 TV Lines 0.3 Lux(301RE, AGC ON), 0 Lux(IR LED) DC Auto IRIS Vari-focal (f =3.8-9.5mm) Manual 1/60-1/100,000 1/50-100,000 ATW (1,800'K -10,500'K)
  • Honeywell HD73 | Operation Manual - Page 35
    & Night Privacy Mirror Gamma Motion Detection Contrast Sharpness Applicable Lens Supply Voltage Power Consumption Operating Temperature Storage Temperature Dome Size (0) Weight ON / OFF (Level Adjustable) Auto (ICR) ON / OFF (4 Programmable Zone) ON / OFF (Horizontal) User / 0.5 - 1.0 Adjustable ON
  • Honeywell HD73 | Operation Manual - Page 36
    3-Axis 10. TROUBLESHOOTING z 6 836 • If you have trouble operating your camera, refer to the following table. lithe guidelines do not enable you to solve the problem, contact an authorized technician. Problem Nothing appears on the screen. The image on the screen is dim. The image on the screen
  • Honeywell HD73 | Operation Manual - Page 37
    3 O COLOR DOME CAMERA
  • Honeywell HD73 | Operation Manual - Page 38
    4 '' z o i 6 8 38
  • Honeywell HD73 | Operation Manual - Page 39
    1 5 39$
  • Honeywell HD73 | Operation Manual - Page 40
    In Design and specifications are subject to change without notice. P/N:3810-0104C Rev 06'03 \e to in sl (12/ 0t, 41.1P s fl Need Help? Call 1.800.796.CCTV for sales, service and customer support. www.honeywellvideo.com
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
I
Honeywell
Honeywell
O
READ
AND
KEEP
THIS
OPERATION
MANUAL
H
D7
3
Series
Operation
Manual
Vandal
-Resistant
Dome Camera
eT
Dig
Srtir
ital_
www.honeywellvideo.com