Honeywell HE120A Owner's Manual

Honeywell HE120A Manual

Get Honeywell HE120A PDF manuals and user guides View all Honeywell HE120A manuals
Add to My Manuals
Save this manual to your list of manuals

Honeywell HE120A manual content summary:

  • Honeywell HE120A | Owner's Manual - Page 1
    open- ing. 4. Position the humidifier housing (see Fig. 2) over the hole (be sure it is level) and mark the five mounting holes. INSTALLATION INSTRUCTIONS BYPASS COLLAR HUMIDIFIER HORIZONTAL LOWBOY DFOLWON HIGHBOY M12248D Fig. 1. Typical humidifier installation locations. TEMPLATE 69-1104-3
  • Honeywell HE120A | Owner's Manual - Page 2
    side of the valve. 22. Assemble the drum and humidifier pad. See Fig. 3. 23. Insert the drum assembly into the motor coupling end and snap into the bearing end. 24. Install the saddle valve (using the instructions on the saddle valve bag) on the nearest cold water pipe. 25. Connect the copper tubing
  • Honeywell HE120A | Owner's Manual - Page 3
    drum motor, transformer, and humidity Control. Refer to the humidity Control installation instructions for mounting and wiring information. CHECKOUT PROCEDURE After winter startup or maintenance, use the following procedure to check the humidifier operation: 1. Turn on the humidifier power and water
  • 1
  • 2
  • 3
INSTALLATION INSTRUCTIONS
69-1104—3
TEMPLATE
TEMPLATE
TEMPLATE
HE120A,B
By-Pass Drum Humidifier
WARNING
Electrocution and Chemical Hazard.
Can cause death or blindness.
Do not cut or drill into any air conditioning line or electrical
accessory.
CAUTION
Freezing Water Hazard.
Can result in water damage to property.
Locate the humidifier where the ambient temperature is
between 32°F and 180°F (0°C and 93°C).
IMPORTANT
Template must be level before marking location.
1.
Determine the best location for the humidifier and draw a
level line on the duct. See Fig. 1.
2.
Tape this template in position and trace around it.
3.
Remove the template and carefully cut the rectangular open-
ing.
4.
Position the humidifier housing (see Fig. 2) over the hole (be
sure it is level) and mark the five mounting holes.
Fig. 1. Typical humidifier installation locations.
M12248D
HORIZONTAL
DOWN
FLO
LOWBOY
HIGHBOY
HUMIDIFIER
BYPASS
COLLAR