Honeywell PRO22IC Installation Manual

Honeywell PRO22IC Manual

Get Honeywell PRO22IC PDF manuals and user guides View all Honeywell PRO22IC manuals
Add to My Manuals
Save this manual to your list of manuals

Honeywell PRO22IC manual content summary:

  • Honeywell PRO22IC | Installation Manual - Page 1
    PRO-2200 Intelligent Controller Installation Manual Part Number: PRO22IC TD1146 rev0501
  • Honeywell PRO22IC | Installation Manual - Page 2
  • Honeywell PRO22IC | Installation Manual - Page 3
    PRO-2200 Intelligent Controller PRO22IC Installation Guide 3 Contents Warnings and Cautions 4 Disclaimer...6 Unpacking Procedure 6 Shipping Instructions 7 Limited Warranty 7 Confidentiality ...8 Description ...9 Set Up ...9 LED Operation 10 Power...10 Communications 11 Alarm Inputs...12
  • Honeywell PRO22IC | Installation Manual - Page 4
    4 Installation Guide PRO-2200 Intelligent Controller PRO22IC Warnings and Cautions WARNING Before installation, TURN OFF the external circuit breaker which supplies power to the system. Before connecting the device to the power supply, verify that the output voltage
  • Honeywell PRO22IC | Installation Manual - Page 5
    PRO-2200 Intelligent Controller PRO22IC Installation Guide 5 CAUTION IF ANY DAMAGE TO THE SHIPMENT IS NOTICED, A , and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
  • Honeywell PRO22IC | Installation Manual - Page 6
    6 Installation Guide PRO-2200 Intelligent Controller PRO22IC Disclaimer Product Liability; Mutual Indemnification In the to the contents. The following steps are used to unpack equipment in preparation for installation: 1. Open the container and remove the unit(s) and all packing material. Retain
  • Honeywell PRO22IC | Installation Manual - Page 7
    Intelligent Controller PRO22IC Installation Guide 7 Shipping Instructions To ship equipment back to Engineering Systems: 1. Contact the customer service department before returning equipment at 800-323-4576. When calling please have available: • A description of the problem Product manuals. THERE
  • Honeywell PRO22IC | Installation Manual - Page 8
    8 Installation Guide PRO-2200 Intelligent Controller PRO22IC Confidentiality All software, drawings, diagrams, specifications, catalogs, literature, manuals and other materials furnished by Engineering Systems relating to the design, use and service of the Products shall remain confidential and
  • Honeywell PRO22IC | Installation Manual - Page 9
    PRO-2200 Intelligent Controller PRO22IC Installation Guide 9 Description The Intelligent Controller is the heart interface. An optional interface board (PRO22EN) converts the RS-232 output of port 1 into an Ethernet port capable of supporting TCP/IP. If this interface board is present, this port
  • Honeywell PRO22IC | Installation Manual - Page 10
    10 Installation Guide PRO-2200 Intelligent Controller PRO22IC DIP Switch Settings: S8 S7 S6 S5 S4 S3 1: NO HARDWARE FLOW CONTROL PORT 1: HARDWARE FLOW CONTROL 115.2K BPS 9,600 BPS 19,200 BPS 38,400 BPS NO PASSWORD PASSWORD LOGON REQUIRED The controller uses three on-board LEDs to provide status
  • Honeywell PRO22IC | Installation Manual - Page 11
    PRO-2200 Intelligent Controller PRO22IC Installation Guide 11 Power The controller accepts 12 VDC with an operating range of 10 to 16 VDC and consumes 400mA of current. Locate power source as close to this board as possible. Connect power with minimum of 18AWG wires. The addition of the PRO22EN
  • Honeywell PRO22IC | Installation Manual - Page 12
    12 Installation Guide PRO-2200 Intelligent Controller PRO22IC For Wiring to an RS-485 port: 1. TR+ is the network. See the installation guide for the PRO22EN for instructions on mounting and connecting the board to the PRO22IC Alarm Inputs The two alarm inputs on this board are dedicated to the
  • Honeywell PRO22IC | Installation Manual - Page 13
    PRO-2200 Intelligent Controller PRO22IC Installation Guide 13 Suggested Installation Sequence 1. Set Jumpers and the DIP-switch per this installation guide. 2. Install the PRO22EN and/or PRO22M4 option boards per the appropriate installation guide. 3. Mount this board in the appropriate enclosure
  • Honeywell PRO22IC | Installation Manual - Page 14
    14 Installation Guide PRO-2200 Intelligent Controller PRO22IC Wiring Diagram Tamper Switch (In Close Position ! Tamper 1 Switch Common 2 Power Fail 3 CONTROLLER BOARD Battery Lithium 3V Any Supervised Input On Any Adjacent Rack Mounted Board (OPTIONAL) LAN Card Connector J2 RS 485 or
  • Honeywell PRO22IC | Installation Manual - Page 15
  • Honeywell PRO22IC | Installation Manual - Page 16
    Honeywell Security & Data Collection 2700 Blankenbaker Pkwy, Suite 150 Louisville, KY 40299 (800) 675-3364 www.honeywellaccess.com
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
PRO-2200
Intelligent Controller
Installation Manual
Part Number: PRO22IC
TD1146 rev0501