Honeywell RLV430A Owner's Manual
Honeywell RLV430A Manual
 |
View all Honeywell RLV430A manuals
Add to My Manuals
Save this manual to your list of manuals |
Honeywell RLV430A manual content summary:
- Honeywell RLV430A | Owner's Manual - Page 1
button Hour button Minute button Program button Return button Mode button Up/Down buttons RLV430 User Guide Programmable Thermostat Time and day Appears if the thermostat is configured for a fan-forced heater Appears when the setpoint is displayed Heating power indicator Period no. in Automatic - Honeywell RLV430A | Owner's Manual - Page 2
number will appear. In this mode, the thermostat automatically adjust its temperature setpoint according to the period of the day (wake up, leave for work, return home and sleep). You can program up to 4 periods in a day. You can set 2 different programs: one for the weekdays (Monday to Friday - Honeywell RLV430A | Owner's Manual - Page 3
comfortable level is attained by the time you arrive. Set the day and time that you 2 Set to an economy level. want the thermostat in automatic mode or in manual mode before the temperature drops back to the economy level. When you leave, switch the thermostat back to economy mode. To program - Honeywell RLV430A | Owner's Manual - Page 4
. In Canada, write Retail Products ON15-02H, Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V4Z9. Customer Assistance 12. If you have any questions about the operation of your thermostat, please go to http://yourhome.honeywell.com, or call Honeywell Customer Care
-
1 -
2 -
3 -
4
 |
 |
RLV430
69-1855-1
2008-01-29
1/4
The RLV430 thermostat can be used to control an electric heating
system such as a baseboard heater, a radiant floor, a radiant ceiling,
a convector or a fan-forced heater.
The thermostat cannot be used with the following:
•
a resistive load under 2 A
•
a resistive load over 14.6 A
•
systems driven by a contactor or a relay (inductive load)
•
central heating systems
SUPPLIED PARTS
•
One (1) thermostat
•
Two (2) 6-32 mounting screws
•
Two (2) solderless connectors
TURN OFF POWER TO THE HEATING SYSTEM AT THE MAIN
POWER PANEL TO AVOID ELECTRICAL SHOCK.
All cables and connections must comply with local electrical
codes.
This thermostat has tinned copper wires for line and load con-
nections. Special CO/ALR solderless connectors must be used if
these wires will be connected to aluminium conductors.
Install the thermostat onto an electrical box.
Install the thermostat about 5 feet high, on an inside wall facing
the heater.
Avoid locations where there are air drafts (such as the top of a
staircase or an air outlet), dead air spots (such as behind a
door), or direct sunlight.
Do not install the thermostat on a wall that conceals chimney or
stove pipes.
The thermostat wires are not polarized; either wire can be con-
nected to the load or to the power supply.
1) Connect the thermostat
Connect the thermostat wires to the power and to the load using
solderless connectors for copper wires.
Description
Installation
Up/Down buttons
Mode button
Day button
Hour button
Program button
Return button
Reset opening
Minute button
Period no. in
Automatic mode
Temperature
Heating power
indicator
Time and day
Manual
mode
Automatic
mode
Economy
mode
Setting no. in
Economy mode
Appears during
a power failure
Appears when the
setpoint is displayed
Flashes when the
clock has been reset
Appears if the
thermostat is configured
for a fan-forced heater
4-wire installation
2-wire installation
RLV430
User Guide
Programmable Thermostat