Honeywell RTH2310B Owner's Manual - Page 12
System Setup - manual
UPC - 085267278560
View all Honeywell RTH2310B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Quick Installation Guide 10 System Setup 9. 1) Press both and buttons simultaneously for 3 seconds to enter or exit the setup menu. 2) To advance to the next function, briefly press both and buttons simultaneously. 3) To change the setting, press the or button. DISPLAY DESCRIPTION OPTIONS 1 Temperature display °C or °F Time display 12 h or 24 h Early Start 2 On or Off Heating cycles per hour 3 2, 3, 4, 5 or 6 4 Cooling cycles per hour 3 2, 3, 4, 5 or 6 5 1 Default settings are shown in bold and underlined. 2 See page 3 of Operating Manual. 3 Use the system switch to switch between the two parameters. 4 For optimal heating control, use the setting that matches your system as follows: 2=30 min (steam, gravity), 3=20 min (hot water, 90%+ high-efficiency furnace), 4=15 min (gas or oil), 5=12 min (alternate setting for gas or oil), 6=10 min (electric). 5 The corresponding cooling cycle lengths are as follows: 2=30 min, 3=20 min, 4=15 min, 5=12 min, 6=10 min 69-2214EF-04 M.S. Rev. 03-11 Printed in U.S.A.