Honeywell RTH2310B Owner's Manual - Page 5

Identify Wires - programmable thermostat

Get Honeywell RTH2310B PDF manuals and user guides
UPC - 085267278560
View all Honeywell RTH2310B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

RTH2310 Programmable Thermostat 3 Identify Wires 3. If any wires are not attached to your old thermostat or are attached to a terminal marked C or C1, they will not be connected to your new thermostat. Wrap the bare metal end of each of these wires with electrical tape, so it cannot touch and short other wires. Do not use non-connected wires. Do not use C or C1 wires Identify and label each wire. IGNORE WIRE COLORS: Use terminal screw designations to identify wires. Disconnect wires and remove the old wallplate only after all wires are labeled. Wrap the wires around a pencil to prevent them from falling though the wall opening. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
RTH2310 Programmable Thermostat
4
If any wires are not attached to your old thermostat or are
attached to a terminal marked
C
or
C1
, they will not be
connected to your new thermostat. Wrap the bare metal end
of each of these wires with electrical tape, so it cannot touch
and short other wires.
Disconnect wires and remove the old wallplate only
after all wires are labeled.
Wrap the wires around
a pencil to prevent them from falling though the
wall opening
.
3
Identify Wires
3.
Do not use
non-connected wires.
Do not use
C
or
C1
wires
Identify and label each wire.
IGNORE WIRE COLORS
:
Use terminal screw
designations to identify
wires.