Honeywell RTH7600 Quick Start Guide
Honeywell RTH7600 Manual
 |
View all Honeywell RTH7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Honeywell RTH7600 manual content summary:
- Honeywell RTH7600 | Quick Start Guide - Page 1
Congratulations, you're done! Thermostat is set with energy saving schedule; see operating manual to adjust schedule. See step 12b for thermostat preferences. If your system type is: q Multistage Heat and Cool q Heat Pump* without Backup Heat q Heat Pump* with Backup Heat q Heat Only or Cool Only - Honeywell RTH7600 | Quick Start Guide - Page 2
stages (wires on Y and Y2). 0180 Heating Fan Control 0 Gas or oil heat: Use this setting if you have a gas or oil heating system (system controls fan operation). 1 Electric heat: Use this setting if you have an electric heating system (thermostat controls fan operation). 0190 Heat Pump 0 Cooling
-
1 -
2
 |
 |
69-2721-01
Quick Start Guide
Touchscreen Programmable
Thermostat
RTH7600 Series
Installation is Easy
Label wires and remove your old thermostat
Install and wire your new thermostat
Set your new thermostat to match your heating/cooling
system
–
This thermostat works with virtually all System
Types
–
It is preset for the most common system
We are here to help.
Call 1-800-468-1502 for
wiring assistance before
returning the thermostat to
the store.
Remove old thermostat but leave wallplate with
wires attached.
2
Remove Old Thermostat
1
Turn
OFF
Power to Heating/
Cooling System
50
60
70
80
F
OFF
AUTO
EM. HEAT
EM. HEAT
AUX. HEAT
50 60
70
80
MCR33835
Is there a sealed tube containing
mercury? If so, see back cover for
proper disposal instructions.
Leave wallplate
in place
Old thermostat
Cover
Label the wires using the supplied wire labels as you
disconnect them, then remove the old wallplate.
3
Label Wires with Tags
Wire Labels
Wire color might not match labels.
M31545
MCR33763
Remove wallplate from the new thermostat.
M28073
4
Separate Wallplate from
New Thermostat
Wallplate
Mount the new wallplate using the included screws
and anchors.
5
Mount Wallplate
MCR28094
Drill 3/16-in. holes for drywall
Drill 3/32-in. holes for plaster
MCR27518
Simply match wire labels.
Remove metal jumper if you have both
R
and
Rc
wires.
MCR28070
W2
Y2
C
G
Y
W
RC
R
LABELED WIRES
SCREW
CONVENTIONAL
INSERT WIRES
THEN TIGHTEN SCREWS
WIRE HOLE
Y
G
R
W
CONVENTIONAL
6
Connect Wires
Labels don’t match?
See Wiring Notes (over).
Have a Heat Pump system?
See Wiring Notes (over).
Call 1-800-468-1502 for wiring assistance.
Install two AA alkaline batteries and remove tab.
MCR28101
Back of thermostat
Remove tab.
7
Install Batteries
M27519
Install thermostat onto the wallplate on the wall.
Turn the power back on to the heating/cooling system.
8
Install Thermostat onto Wallplate
9
Turn Power Back
ON
Go Back
Next
Done
6
15
2012
MCR33548
Done
MCR33549
10:10
If your system type is:
q
Single Stage Heat and Cool
Congratulations, you’re done!
Thermostat is set with energy saving schedule; see operating
manual to adjust schedule.
See step 12b for thermostat preferences.
If your system type is:
q
Multistage Heat and Cool
q
Heat Pump* without Backup Heat
q
Heat Pump* with Backup Heat
q
Heat Only or Cool Only
Continue to step 12a to match your thermostat to your
system type.
*Heat Pump—an air conditioner that provides cooling in the
summer, and also runs in reverse in the winter to provide
heating.
This thermostat works on 24 volt or 750 mV systems. It will
NOT work on 120/240 Volt systems.
11
If your system type is...
Month
Year
Day
10
Set Time and Date
Press
s
or
t
to set month, then press NEXT.
Press
s
or
t
to set day, then press NEXT.
Press
s
or
t
to set year, then press DONE.
Press
s
or
t
to set time, then press DONE to save and
exit.
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
® U.S. Registered Trademark.
© 2012 Honeywell International Inc.
69-2721—01
M.S.
05-12
Printed in U.S.A.
Automation and Control Solutions
MERCURY NOTICE:
Do not place your old
thermostat in the trash if it contains mercury in a
sealed tube. Contact the Thermostat Recycling
Corporation at www.thermostat-recycle.org or 800-
238-8192 for information on how and where to
properly and safely dispose of your old thermostat.
CAUTION:
To avoid possible compressor damage,
do not run air conditioner if the outside temperature
drops below 50°F (10°C).
This thermostat contains a Lithium battery which
may contain Perchlorate material.
Perchlorate Material—special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate
If you are not sure of your system type or if you have
other questions, call us toll-free at 1-800-468-1502.
or
or