Honeywell T8000 Owner's Manual

Honeywell T8000 Manual

Get Honeywell T8000 PDF manuals and user guides View all Honeywell T8000 manuals
Add to My Manuals
Save this manual to your list of manuals

Honeywell T8000 manual content summary:

  • Honeywell T8000 | Owner's Manual - Page 1
    T8000, T8001,T8002, T8011, T8024 Programmable Thermostats OWNER'S GUIDE 1 6699-1-1443311-1-1
  • Honeywell T8000 | Owner's Manual - Page 2
    and energy savings with your new Honeywell programmable thermostat. Your new programmable thermostat is designed to provide you with reliable, precise temperature control. When you follow the simple programming instructions in this manual, your thermostat automatically controls the temperature in
  • Honeywell T8000 | Owner's Manual - Page 3
    Temperature Hold 13 Setting Indefinite Temperature Hold 13 Operating Thermostat ...13 Setting SYSTEM and FAN Switches 13 Replace the Batteries (T8002 Only 14 Backlighting (Select Models 14 Minimum Off-Timing ...15 Troubleshooting ...16 Customer Assistance ...19 Warranty ...20 3 69-1431
  • Honeywell T8000 | Owner's Manual - Page 4
    TIME AND TEMPERATURE. • SET TEMPORARY TEMPERATURE HOLD. SELECT KEY • CURRENT SETPOINT. • CHANGE DAY AND TIME. • PROGRAM SELECTIONS. T8000, T8001 PM T8011, T8024 TUE MODELS Hold Select PM TUE Hold Select T8002 MODEL AuFtoANOn FAN SWITCH CoolSOYfSf THEeMat HOLD KEY • SET TEMPORARY
  • Honeywell T8000 | Owner's Manual - Page 5
    schedule to plan your program. Fill in the weekday and weekend times and temperatures you desire. If you decide not to program the thermostat, it uses the preprogrammed time and temperature settings in Table 1. Table 1. Preprogrammed Time and Temperature Settings. Period Time Wake 6:00 AM Leave
  • Honeywell T8000 | Owner's Manual - Page 6
    Program Schedule Weekday Start Time Heating Temperature Cooling Temperature Wake Leave Return Sleep Weekend Start Time Heating Temperature Cooling Temperature Wake Leave Return Sleep Wake and Return start times should include extra lead time, based on outside
  • Honeywell T8000 | Owner's Manual - Page 7
    various times of the day. Four time periods are available during weekdays and the weekend-Wake, Leave, Return, and Sleep. Wake is the time the thermostat turns on the heating/cooling equipment after an energy saving period. When deciding what time to set for your Wake period, include extra lead time
  • Honeywell T8000 | Owner's Manual - Page 8
    Sleep is the time period you can set for an energy-saving temperature while you are sleeping. (For more comfortable sleeping, some people choose not to raise the cool temperature during the night.) IMPORTANT Always press the keys with your fingertip or similar blunt tool. Sharp instruments like
  • Honeywell T8000 | Owner's Manual - Page 9
    Setting Weekday Program Slide the SYSTEM switch to the position, Heat or Cool, you want to program. A flame (heating) or a snowflake (cooling) appears in the right side of the display, when setting the program temperature. 3. Wake a. Press Select. Press ▲ or ▼ to set Wake SET time. 4. Leave
  • Honeywell T8000 | Owner's Manual - Page 10
    b. Press Select. Press ▲ or ▼ to set Return SET temperature. 6. Sleep M12629B a. Press Select. Press ▲ or ▼ to set Sleep SET time. M18568 b. Press Select. Press ▲ or ▼ to set Sleep SET temp- erature. Setting Weekend Program 7. Wake a. Press Select. Press ▲ or ▼ to set Wake SET time.
  • Honeywell T8000 | Owner's Manual - Page 11
    8. Leave a. Press Select. Press ▲ or ▼ to set Leave SET time. b. Press Select. Press ▲ or ▼ to set Return SET temp- erature. M18550 b. Press Select. Press ▲ or ▼ to set Leave SET temp- erature. 9. Return M12635B a. Press Select. Press ▲ or ▼ to set Return SET time. 10. Sleep
  • Honeywell T8000 | Owner's Manual - Page 12
    11. Press Select. End is displayed. Programming is complete. The thermostat reverts to displaying SET the current day time and temperature in five seconds. M18556 Setting Temporary Temperature Hold 1. Press ▲ or ▼ key to set a temporary temperature
  • Honeywell T8000 | Owner's Manual - Page 13
    setting. FAN settings: Auto: Fan operates with equipment. On: Fan operates continuously. Slide the FAN switch in the lower left corner of the thermostat to select the desired fan setting. Heat and Cool Indicators: Indicates a call for heat. Indicates a call for cool. NOTE: In the programming mode
  • Honeywell T8000 | Owner's Manual - Page 14
    three AA alkaline batteries to operate. As the batteries run low, your thermostat shows a "bAt Lo" message in the digital display. The message flashes for one to two months before the batteries run out completely. Replace the batteries as soon as possible after the message flashes. The batteries
  • Honeywell T8000 | Owner's Manual - Page 15
    Minimum Off-Timing The thermostat minimum off-timer assures that the compressor does not come on again for , T8002, T8024 (multistage model) and in first stage heating or cooling on the T8011 (heat pump model). A flashing flame or snowflake indicates the minimum off-time is in effect. 15 69-1431-1
  • Honeywell T8000 | Owner's Manual - Page 16
    latch the thermostat on the wallplate. • Check if the circuit breaker is tripped-reset the circuit breaker. • Check if the fuse is blown-replace the fuse. • Check if the switch at the equipment is in the Off position-set to the On position. • Check if the batteries are good and installed correctly
  • Honeywell T8000 | Owner's Manual - Page 17
    Troubleshooting (Continued). Symptom Heating does not come on. Action • Check if the circuit breaker is tripped-reset the circuit breaker. • Check if the fuse is blown-replace the fuse. • Check if the switch at the equipment is in the Off position-set to On position. • Wait five minutes for the
  • Honeywell T8000 | Owner's Manual - Page 18
    Troubleshooting (Continued). Symptom Cooling does not come on. Action • Check if the circuit breaker is tripped-reset the circuit breaker. • Check if the fuse is blown-replace the fuse. • Check if the switch at the equipment is in the Off position-set to On position. • Wait five minutes for the
  • Honeywell T8000 | Owner's Manual - Page 19
    Troubleshooting (Continued). Symptom System on indicator or is lit, but no warm or cool . Customer Assistance If you have any questions concerning the operation of your thermostat, please visit us at www.honeywell.com or call the thermostat information helpline at 1-800-468-1502. 19 69-1431-1
  • Honeywell T8000 | Owner's Manual - Page 20
    or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If, at any time during the warranty period, the product is defective or malfunctions, Honeywell shall repair or replace it (at Honeywell's option) within a reasonable period of time
  • Honeywell T8000 | Owner's Manual - Page 21
    sole responsibility shall be to repair or replace the product within the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS limitation may not apply to you. THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE
  • Honeywell T8000 | Owner's Manual - Page 22
  • Honeywell T8000 | Owner's Manual - Page 23
  • Honeywell T8000 | Owner's Manual - Page 24
    ée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Scarborough, Ontario M1V 4Z9 69-1431-1 Rev. 5-02 G.H. Copyright © 2002 Honeywell All Rights Reserved ® U.S. Registered Tra2d4emark Printed in U.S.A. on recycled paper containing at least 10% post-consumer paper fibers. www
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
OWNER’S GUIDE
T8000, T8001,T8002, T8011, T8024
Programmable Thermostats
69-1431-1