Honeywell TH3110D1008 Owner's Manual - Page 13
PRO TH3110D / TH3210D
UPC - 085267265140
View all Honeywell TH3110D1008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ENGLISH PRO TH3110D / TH3210D In case of difficulty Temperature settings do not change Make sure heating and cooling temperatures are set to acceptable ranges: • Heat: 40° to 90°F (4.5° to 32°C). • Cool: 50° to 99°F (10° to 37°C). "Cool On" or "Heat On" is flashing • Compressor protection feature is engaged. Wait 5 minutes for the system to restart safely, without damage to the compressor (see page 8). "Heat On" is not • Set the System switch to Heat, and set the temperature level above the displayed current room temperature (see page 7). "Cool On" is not • Set the System switch to Cool, and set the temperature level below the displayed current room temperature (see page 7). 11 69-1776EFS-01
11
69-1776EFS—01
PRO TH3110D / TH3210D
ENGLISH
Temperature
settings do not
change
Make sure heating and cooling temperatures are set to acceptable ranges:
•
Heat: 40° to 90°F (4.5° to 32°C).
•
Cool: 50° to 99°F (10° to 37°C).
“Cool On” or
“Heat On” is
flashing
•
Compressor protection feature is engaged. Wait 5 minutes for the system
to restart safely, without damage to the compressor (see page 8).
“Heat On” is not
displayed
•
Set the System switch to Heat, and set the temperature level above the
current room temperature (see page 7).
“Cool On” is not
displayed
•
Set the System switch to Cool, and set the temperature level below the
current room temperature (see page 7).
In case of difficulty