Honeywell XL4600SM Owners Manual - Page 8

TURNING THE SYSTEM ON TO TURN THE SYSTEM ON - NOT READY Determine which zone or zones is not ready, resolve the problem, and turn the system on normally. If the problem cannot be resolved, you may bypaaa the zone that is not ready. Bypassing should only be done if the problem on the zone cannot be resolved, OR if you intentionally wish to leave the zone off, Example you wish to keep the window open for ventilation, Zones that are bypassed are not protacted when the systam ia on. See Bypass for the procedure. TURN SYSTEM ON AND STAY fNSIDE To turn the perimeter potion of your burglar alarm on and move around freely inside the premises, use the STAY mode. Check to make sure the system is ready when raady press: m u Followed by your user code unn If successful, the OtiOff (arm) light and the Stay tight will be lit, or the" display shows ~ REMEMBER: You must turn the system off if you want to open the door or leave the premises after the exit time haa passed. TURN THE SYSTEM ON: PERIMETER SENSORS INSTANT MODE AND STAY fNSIDE In fNSTANT STAY mode, the parimeter potiion of your burglar alarm system is on and the time delays are eliminated from your normal ent~/exit door(s), All interior protection is off so you are free to move around inside. Check to make sure the system is READY, when ready press m m '"''owed by Followed by your user code m m m rl If successful, the OtiOff fight, the Instant light and the Stay light will all be on, or the dsplay ahowa: ON: STAY INSTANT [ Psgs s