Home » Hoover Manuals » Steam Cleaners » Hoover F7206 » Manual Viewer

Hoover F7206 Manual

View all Hoover F7206 manuals

Add to My Manuals
Save this manual to your list of manuals

Hoover F7206 manual content summary:

Hoover F7206 | Manual - Page 1
™ ™ ® ENGLISH § pp. 1-17 ESPAÑOL § pág. 18-27 FRANÇAIS § p. 28-37 Deep Cleaner The Easy to Use Deep Cleaner SteamVac™ Dual V™ Deep Cleaner cleans carpet fibers by applying hot tap water and cleaning solution. www.hoover.com
Hoover F7206 | Manual - Page 2
or pets. • Use extra care when cleaning on stairs. Do not place deep cleaner on stairs. • Use deep cleaner only for its intended use as described in the instructions. • Use only commercially available Hoover SteamVac™ cleaners intended for machine application. Do not use any type of wax with deep
Hoover F7206 | Manual - Page 3
upholstery 15 If you have a problem 16 Lubrication 16 Service 17 Storage 16 Warranty 17 1. Assembly Parts needed for assembly 1-1 © 2002 The Hoover Company www.hoover.com Accessories - vary by model C D F Carpet Upholstery Cleaner Bare floor cleaner PreCleaner G HI J B A A. Deep
Hoover F7206 | Manual - Page 4
will look like this 1-2 drawing. Model with SpinScrub™ hand tool is shown. 1-3 C B A Attach upper handle Remove clean water tank (upper tank) from deep cleaner. NOTE: If the cord protector (A) on back of handle should become dislodged during unpacking, make sure it is repositioned properly
Hoover F7206 | Manual - Page 5
(H) on cleaner. J Identify the hose parts before storing hose bare floor tool (available at additional cost if not included with your cleaner) through "loop" on caddy. Slide tool down into place. Snap stair/upholstery nozzle onto caddy. SpinScrub™ hand tool (not included with all models
Hoover F7206 | Manual - Page 6
1-18 1-19 Pull tool down and outward. To reposition the tool, reverse this procedure. How to reattach tool cover The tool cover is designed with a breakaway feature which allows it to snap free if it is pushed open too far. To reattach, align hinges of cover with holes on sides of tool storage
Hoover F7206 | Manual - Page 7
22 14 13 23 The assembled deep cleaner will look like the drawing. Model with SpinScrub™ hand tool is shown floor tool (available at additional cost if not included with your cleaner) 22. Cord/hose hook 23. Handle release pedal This deep cleaner is intended for household use. Operate deep cleaner
Hoover F7206 | Manual - Page 8
or dislodged, take to an Authorized Hoover Service Center or Dealer for repair. Brush setting selector Your 'SteamVac' deep cleaner has two agitator brush settings. ON - for cleaning of carpet and bare floors OFF - for cleaning carpets and bare floors when brushing is not desired. Slide selector
Hoover F7206 | Manual - Page 9
14 Fill container (16 oz.) with HOOVER Carpet/Upholstery Detergent or HOOVER Bare Floor Cleaner. Do not use Bare Floor Cleaner on carpet or upholstery. Do not use any type of wax with your 'SteamVac' deep cleaner. To assure proper results, use only HOOVER detergent. Replace container cap and tighten
Hoover F7206 | Manual - Page 10
attachments. Use a crevice tool to reach into tufts and folds. Do not use the 'SteamVac' deep cleaner as a dry vacuum cleaner. b. For upholstery, check cleaning code - Use your HOOVER 'SteamVac' deep cleaner only if the upholstery fabric is marked with a "W" (for "wet" clean) or "S/W" (for "solvent
Hoover F7206 | Manual - Page 11
2-9 to 2-12. 2. Fill detergent container with HOOVER Carpet/Upholstery Detergent according to instructions for Figs. 2-13 to 2-15. 3. Turn brushes ON or OFF as desired. 4. Dry hands and plug cord into a properly grounded outlet. Do not clean over floor electrical outlets. 5. To avoid walking on damp
Hoover F7206 | Manual - Page 12
tank. To clean floor Read "Before you begin cleaning" instructions on page 9. Do not use the deep cleaner on hardwood floors. 1. Fill clean water tank according to instructions for Figs. 2-9 to 2-15. 2. Fill detergent container with HOOVER Bare Floor Cleaner according to instructions for Figs. 2-13
Hoover F7206 | Manual - Page 13
scrubbing action on small carpet areas, carpeted stairs and upholstery. For some models, the brushes can be removed for converting to the scrub module. module 3-17 M L Available at additional cost if not included with your cleaner. 1. Open the tool door and remove the SpinScrub™ hand tool. 2. Grasp
Hoover F7206 | Manual - Page 14
to module. Replacement pads may also be purchased. Ask for HOOVER part no. 40308001. Using the scrub tool With a little solution, water tank according to instructions for Figs. 2-9 to 2-12. 4. Fill detergent container with HOOVER Bare Floor Cleaner according to instructions for Figs. 2-13
Hoover F7206 | Manual - Page 15
HOOVER Carpet/Upholstery Detergent according to instructions for Figs. 2-13 to 2-15. 5. Attach tool to end of hose. Do not point tools toward people or pets. 6. Dry hands and plug deep cleaner handle in upright position, tilt cleaner back until handle rests on the floor. 4-2 Grab brush assembly and
Hoover F7206 | Manual - Page 16
deep cleaner to air dry thoroughly before storing deep cleaner on a carpeted or wood surface. Do not store deep cleaner with with tabs (C) in opening. Turn cap clockwise to tighten. Problem: Brushes won't rotate during floor cleaning Possible cause Possible solution • Dirty filter screen on bottom
Hoover F7206 | Manual - Page 17
service and genuine HOOVER parts, locate the nearest Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer (Depot) by: • checking the Service section of The Hoover Company on-line at www.hoover.com OR • checking the list of Factory Service Centers provided with this cleaner