Home » Hoover Manuals » Steam Cleaners » Hoover F7227 » Manual Viewer

Hoover F7227 Manual

View all Hoover F7227 manuals

Add to My Manuals
Save this manual to your list of manuals

Hoover F7227 manual content summary:

Hoover F7227 | Manual - Page 1
™ ™ ® ENGLISH § pp. 1-17 ESPAÑOL § pág. 18-27 FRANÇAIS § p. 28-37 Deep Cleaner The Easy to Use Deep Cleaner SteamVac™ Dual V™ Deep Cleaner cleans carpet fibers by applying hot tap water and cleaning solution. www.hoover.com
Hoover F7227 | Manual - Page 2
described in the instructions. • Use only commercially available Hoover SteamVac™ cleaners intended for machine application. Do not use any type of wax with deep cleaner. • Keep detergents and other cleaners out of children's reach. • Use only attachments recommended by The Hoover Company; others
Hoover F7227 | Manual - Page 3
the handle. Model No Serial No Hint: Attach your sales receipt to this owner's manual. Verification of date of purchase may be required for warranty service of your Hoover product. Contents Important safeguards 2 Parts needed for assembly 3 Assembling deep cleaner 4-6 Deep cleaner description
Hoover F7227 | Manual - Page 4
for storage. If you do not want to attach the caddy to the cleaner at this time, proceed to Fig. 1-10 for proper hose placement on the caddy. Replace clean water tank (upper tank) by positioning bottom first. Press tank into place. 1-8 E F Attach hose/cord hook Insert tabs on hook into slots on
Hoover F7227 | Manual - Page 5
caddy down so notch (G) on caddy rests in hook (H) on cleaner. J Identify the hose parts before storing hose. I. Nozzle connector end J. Solution tube I Storing hose and tools Press hose, a few inches from nozzle connector end (I), into caddy. Bring hose up and over top of caddy. 1-12 1-13 1-14
Hoover F7227 | Manual - Page 6
1-18 1-19 Pull tool down and outward. To reposition the tool, reverse this procedure. How to reattach tool cover The tool cover is designed with a breakaway feature which allows it to snap free if it is pushed open too far. To reattach, align hinges of cover with holes on sides of tool storage
Hoover F7227 | Manual - Page 7
4. Wash/Rinse switch 5. SpinScrub™ hand tool (not included with all models) 6. Carrying handle 7. Clean water tank handle 8. Clean water tank 9. Detergent container 10. Recovery tank handle 11. Recovery tank: holds dirty solution 12. Recovery tank latches 13. Brush setting selector 14. Solution
Hoover F7227 | Manual - Page 8
tank also; it may need to be refilled. Do not use without float and float retainer in place. If broken or dislodged, take to an Authorized Hoover Service Center or Dealer for repair. Brush setting selector Your 'SteamVac' deep cleaner has two agitator brush settings. ON - for cleaning of carpet
Hoover F7227 | Manual - Page 9
with HOOVER Carpet/Upholstery Detergent or HOOVER Bare Floor Cleaner. Do not use Bare Floor Cleaner on carpet or upholstery. Do not use any type of wax with your 'SteamVac' deep cleaner. To assure proper results, use only HOOVER detergent. Replace container cap and tighten. Recovery tank (lower tank
Hoover F7227 | Manual - Page 10
Vacuum thoroughly - For carpet, use a HOOVER vacuum cleaner with an agitator for best results. Vacuum upholstery with a vacuum cleaner with cleaning tool attachments. Use a crevice tool to reach into tufts and folds. Do not use the 'SteamVac' deep cleaner as a dry vacuum cleaner. b. For upholstery
Hoover F7227 | Manual - Page 11
Raise cleaner to upright position and replace clean water tank (Fig. 2-15). Rinse ON WASH OFF Carpet Cleaning Read "Before you begin cleaning" instructions on page 9. 1. Fill clean water tank according to instructions for Figs. 2-9 to 2-12. 2. Fill detergent container with HOOVER Carpet/Upholstery
Hoover F7227 | Manual - Page 12
may be required to rotate and snap attachment into place.) 4. Return deep cleaner to upright position. Lower handle and replace recovery tank. 5. Raise handle to upright position and reposition clean water tank. To clean floor Read "Before you begin cleaning" instructions on page 9. Do not use the
Hoover F7227 | Manual - Page 13
the SpinScrub™ hand tool (in place of brush module). Can be used to scrub stubborn areas such as scuff marks, dried spills, and in hard to reach areas on hard surfaces. How to attach tools 3-14 J K Unplug deep cleaner from electrical outlet. 1. Place handle in upright position and remove hose from
Hoover F7227 | Manual - Page 14
Agitator brushes will not rotate while handle is in upright position. 3. Fill clean water tank according to instructions for Figs. 2-9 to 2-12. 4. Fill detergent container with HOOVER Carpet/Upholstery Detergent according to instructions for Figs 2-13 to 2-15. 5. Attach tool to end of hose. 6. Hose
Hoover F7227 | Manual - Page 15
. Agitator brushes will not rotate while handle is in upright position. 3. Fill clean water tank according to instructions for Figs. 2-9 to 2-12. 4. Fill detergent container with HOOVER Carpet/Upholstery Detergent according to instructions for Figs. 2-13 to 2-15. 5. Attach tool to end of hose. Do
Hoover F7227 | Manual - Page 16
air dry. Replace on deep cleaner. • Unused detergent can be stored in the detergent container. • Empty recovery tank, rinse tank and lid thoroughly with clean water and let air dry. Allow brushes and underside of deep cleaner to air dry thoroughly before storing deep cleaner on a carpeted or wood
Hoover F7227 | Manual - Page 17
service and genuine HOOVER parts, locate the nearest Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer (Depot) by: • checking the Service section of The Hoover Company on-line at www.hoover.com OR • checking the list of Factory Service Centers provided with this cleaner