Home » Hoover Manuals » Steam Cleaners » Hoover F7428 » Manual Viewer

Hoover F7428 Manual

View all Hoover F7428 manuals

Add to My Manuals
Save this manual to your list of manuals

Hoover F7428 manual content summary:

Hoover F7428 | Manual - Page 1
ENGLISH § pp. 1-17 ESPAÑOL § pág. 18-27 ™ ® ™ TurboPOWER™ Carpet Cleaner with Auto Rinse™ Feature The Easy to Use Carpet Cleaner HOOVER® SteamVac™ carpet cleaner cleans carpet fibers by applying, scrubbing and removing hot tap water and cleaning solution. www.hoover.com
Hoover F7428 | Manual - Page 2
carpet cleaner. • Use carpet cleaner only for its intended use as described in the instructions. • Use only attachments recommended by Hoover; others may cause hazards. • Keep detergents and other cleaners before servicing the carpet cleaner. • all parts of body away from openings and moving parts.
Hoover F7428 | Manual - Page 3
15 If you have a problem 16 Lubrication 16 Service 17 Storage 16 Warranty 17 Parts & accessories mail order form 29 1. Assembly Parts needed for assembly 1-1 © 2006 The Hoover Company www.hoover.com Accessories - vary by model C D E G B A F A. carpet cleaner B. Upper handle C. Handle
Hoover F7428 | Manual - Page 4
lower handle. 1-4 1-5 1-6 D With cord hook (D) to back of carpet cleaner, push upper handle down onto lower handle. 1-7 Push bolts into holes on to attach the caddy to the cleaner at this time, proceed to Fig. 1-10 for proper hose placement on the caddy. Replace clean water tank (upper tank)
Hoover F7428 | Manual - Page 5
handle. Slide caddy down so notch (G) on caddy rests in hook (H) on cleaner. J Identify the hose parts before storing hose. I. Nozzle connector end J. Solution tube I Storing hose and tools Press hose, a few inches from nozzle connector end (I), into caddy. Bring hose up
Hoover F7428 | Manual - Page 6
1-18 1-19 Pull tool down and outward. To reposition the tool, reverse this procedure. How to reattach tool cover The tool cover is designed with a breakaway feature which allows it to snap free if it is pushed open too far. To reattach, align hinges of cover with holes on sides of tool storage
Hoover F7428 | Manual - Page 7
Recovery tank latches 13. Solution tube connection port 14. Brush setting selector 15. Edge cleaners: provided on both sides of nozzle to remove dirt carpet cleaner is intended for household use. Operate carpet cleaner only at voltage specified on data plate on back of cleaner. Plug carpet cleaner
Hoover F7428 | Manual - Page 8
or dislodged, take to an Authorized Hoover Service Center or Dealer for repair. Brush setting selector Your SteamVac™ carpet cleaner has three agitator brush settings. SPILL PICK-UP - brushes OFF for picking up spills or cleaning carpets and bare floors when brushing is not desired. GENTLE SCRUB
Hoover F7428 | Manual - Page 9
or upholstery. Do not use any type of wax with your SteamVac™ carpet cleaner. To assure proper results, use only HOOVER detergent. Replace container cap and tighten. 2-16 2-17 WARNING: Certain oxygenated-type cleaners, such as OxiClean* and TuffOxi** will damage your SteamVac™ detergent container
Hoover F7428 | Manual - Page 10
. Use a crevice tool to reach into tufts and folds. Do not use the SteamVac™ carpet cleaner as a dry vacuum cleaner. b. For upholstery, check cleaning code - Use your HOOVER SteamVac™ carpet cleaner only if the upholstery fabric is marked with a "W" (for "wet" clean) or "S/W" (for "solvent
Hoover F7428 | Manual - Page 11
necessary to walk on damp carpet, place towels or white cloths on the traffic areas. If furniture must be replaced before the carpet is dry, place plastic located on bottom of cleaner as follows. Note: When brushes seem to be rotating slowly, disconnect carpet cleaner from electical outlet and check
Hoover F7428 | Manual - Page 12
Carpet Cleaning Read "Before you begin cleaning" instructions on page 10. 1. Fill clean water tank according to instructions for Fig. 2-11. 2. Fill detergent container with HOOVER Carpet/Upholstery Detergent according to instructions carpet cleaner to upright position. Lower handle and replace
Hoover F7428 | Manual - Page 13
on page 10. Do not use the carpet cleaner on unsealed hardwood floors. 1. Fill clean water tank according to instructions for Figs. 2-9 to 2-11. 2. Fill detergent container with HOOVER Hard Floor Cleaning Solution according to instructions for Figs. 2-12 to 2-14. 3. Set SpinScrub mode selector
Hoover F7428 | Manual - Page 14
13. 2. Place handle in upright position. Agitator brushes will not rotate while handle is in upright position. 3. Fill clean water tank according to instructions for Figs. 2-9 to 2-12. 4. Fill detergent container with HOOVER Carpet/Upholstery Detergent according to instructions for Figs 2-13 to 2-15
Hoover F7428 | Manual - Page 15
on pages 11 & 12 and "After using tool" instructions on page 14. 4. Maintenance Removable brushes Your carpet cleaner is equipped with removable brushes for easy cleaning. To remove brushes Disconnect cleaner from electrical outlet. To prevent possible leaking, remove clean water tank and
Hoover F7428 | Manual - Page 16
dry. Replace on carpet cleaner. • Unused detergent can be stored in the detergent container. • Empty recovery tank, rinse tank and lid thoroughly with clean water and let air dry. Allow brushes and underside of carpet cleaner to air dry thoroughly before storing carpet cleaner on a carpeted or wood
Hoover F7428 | Manual - Page 17
HOOVER service and genuine HOOVER parts, locate the nearest Hoover Sales and Service Center or Authorized Hoover Warranty Service Dealer (Depot) by: • checking the Service section of Hoover on-line at www.hoover.com OR • checking the list of Sales and Service Centers provided with this cleaner