Hoover H3060 Manual - Page 14

Using the tools 35 Select tool A. Floor swivel tool • Swivel head • 2 rows of brushes • Use to clean small, tight areas B. Grout tool • Stiff brushes to use for more concentrated cleaning on stubborn grout stains 35 A Attach hose and tool Unplug cleaner from electrical outlet. How to connect hose 36 Open hose door (A) on side of cleaner.  Align hose connector (B) with hose and solution ports (C).  Insert hose connector (B) until it snaps in place.  To disconnect hose: Squeeze the hook (D) on bottom of hose connector. Remove hose from port.  Close hose door tightly. How to connect telescoping wand 37  Slide wand (A) onto hose end (B). Snap wand over tab (C) on hose.  To extend telescoping wand, pull button (D) toward you and pull wand away from you to the desired length. The full extension of the wand is indicated by a 'MAX' line. It is recommended you do not extend the wand past this line.  To remove wand: Push forward and up on latch (E). Slide wand off hose. 36 A 37 A D B B C D C E B How to connect tools  Tools may be attached directly to the hose or onto the telescoping wand.  All tools attach in the same manner. 38  Slide tool onto hose or wand. Snap tool over tab (A) on hose or wand.  To remove tool: Push forward and up on latch (B). Slide tool off hose or wand. 38 A B B A 14