Hoover H3060 Manual - Page 17
Cleaning the brushes
UPC - 073502027998
View all Hoover H3060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
48 A 49 B 50 D C 51 G F E 52 Cleaning the brushes The brush assembly can be removed for easy cleaning. Turn cleaner OFF and disconnect from electrical outlet. Place handle in the upright position. A Remove tanks to prevent leaking. Set aside. 48 Pull the two nozzle release buttons (A) out. Remove nozzle. Tilt cleaner back so handle rests on floor. 49 Push two brush release buttons (B) and remove the brush assembly. The brushes can be washed with a mild detergent and rinsed. Do not use a solvent based detergent. 50 To replace brushes, align post (C) on brush block with hole (D) on bottom of cleaner. Turn brushes slightly until post fits easily into hole. Press brush assembly firmly to snap into place. 51 Return cleaner to upright position. Replace nozzle, making sure latches (E) are out. Align middle section (F) of nozzle with opening (G) on cleaner. E 52 While holding nozzle in place, slide latches inward to lock in place. Replace tanks. Continued § 17