Hoover SH20030 Product Manual

Hoover SH20030 Manual

Hoover SH20030 manual content summary:

  • Hoover SH20030 | Product Manual - Page 1
    . 2. Call for service: 1-800-944-9200 3. Replace fuse or reset breaker in home. Limited TWO Year Warranty for Cyclonic Stick Vac (Domestic Use) WHAT THIS WARRANTY COVERS When used and maintained in normal household use and in accordance with the Owner's Manual, your HOOVER® product is warranted
  • Hoover SH20030 | Product Manual - Page 2
    é de la preuve d'achat. Pour accéder à un service d'aide automatique donnant la liste des centres de service autorisés, composer le 1 800 944-9200 OU visiter HooverMD sur Internet à hoover.com (clients aux États-Unis) ou à hoover.ca (clients au Canada). ÉLÉMENTS NON COUVERTS PAR LA PRÉSENTE GARANTIE
  • 1
  • 2

CYCLONIC
STICK
VAC
CYCLONIC
ASPIRATEUR
VERTICAL
CYCLONIC
BARREDORA
DE SUCCIÓN
Instructions d’Utilisation et d’Entretien
Veuillez lire attentivement ces instructions avant d’utiliser votre aspirateur vertical HOOVER
MD
.
N’oubliez pas d’enregistrer votre produit en ligne, à l’adresse Hoover.com, ou par téléphone,
au 1-800-944-9200.
Operating and Servicing Instructions
Please read these instructions carefully before using your HOOVER
®
Stick Vac.
Be sure to register your product online at Hoover.com or call 1-800-944-9200 to register by phone.
Instrucciones de Funcionamiento y Mantenimiento
Lea atentamente estas instrucciones antes de usar su Barredora de succión HOOVER
®
.
Inscriba su producto en línea en Hoover.com, o llame al 1-800-944-9200 si prefiere hacerlo por teléfono.
©2010 Techtronic Floor Care Technology Limited. All Rights Reserved. Tous droits réservés.
Todos los derechos reservados. #960009635
ID101174-R0
OWNER’S MANUAL
GUIDE D’UTILISATION • MANUAL DEL USUARIO
1
2
3
4
7
8
5
6
10
9
11
1. FEATURES
2. ASSEMBLY
For filter replacement, please call 1-800-944-9200 or visit our website at www.hoover.com to locate
a dealer nearest you. Filter Service Part #
410044001.
For belt replacement, please call 1-800-944-9200 or visit our website at www.hoover.com to locate
a dealer nearest you. Belt Service Part
#001942002
6. TROUBLESHOOTING
ANY SERVICING SHOULD BE DONE BY AN
AUTHORIZED SERVICE REPRESENTATIVE
Call 1-800-944-9200 USA & Canada
In the event that further assistance is required, see your Yellow Pages for an authorized HOOVER
®
Dealer
or visit www.hoover.com.
Costs of any transportation to and from any place of repair are to be paid by
the owner.
The service parts used in this unit are easily replaced and readily available from an authorized
HOOVER
®
Dealer or retailer.
Always identify your product by the model number and manufacturing code
when requesting information or ordering replacement parts. (The model number appears behind the dirt
cup of the product.)
5. SERVICE
3. HOW TO OPERATE
12
THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY.
IF USED COMMERCIALLY WARRANTY IS VOID.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
When using an electrical appliance, basic precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.
WARNING: TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR INJURY:
• Fully assemble before operating.
• Operate cleaner only at voltage specified on data plate on cleaner behind dirt cup.
• Do not leave appliance when plugged in. Unplug from outlet when not in use and before cleaning or
servicing.
Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Not intended for use by children age 12 and under. Close supervision
is necessary when used near children. To avoid injury or damage, keep children away from product,
and do not allow children to place fingers or other objects into any openings.
• Use only as described in this manual. Use only manufacturer’s recommended attachments and
products.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, take it to a service center prior to continuing use.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp
edges or corners. Do not place product on cord. Do not run appliance over cord. Keep cord away from
heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair,
and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs. To avoid personal injury or damage, and to prevent the
cleaner from falling, always place cleaner at bottom of stairs or on floor. Do not place cleaner on stairs
or furniture, as it may result in injury or damage.
• Do not use to pick up flammable or combustible materials, such as gasoline, or fine wood sandings,
or use in areas where they may be present.
• Always turn off this appliance before connecting or disconnecting motorized nozzle.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without filters or dirt cup in place.
• WARNING - This product contains chemicals known to the State of California to cause cancer, birth
defects or reproductive harm.
• An internal thermal protector has been designed into your cleaner to protect it from overheating.
When the thermal protector activates the brushroll will stop running.
If this happens proceed as follows:
1. Turn cleaner OFF and unplug it from the electrical outlet.
2. Inspect the nozzle base, dirt cup inlet openings, and dirt tube for any obstructions. Clear
obstructions if present.
3. When cleaner is unplugged and motor cools for 30 minutes, the thermal protector will deactivate
and cleaning may continue.
If the thermal protector continues to activate after following the above steps, your cleaner needs
servicing.
CAUTION - TO REDUCE THE RISK OF DAMAGE:
• Avoid picking up hard, sharp objects with this product, as they may cause damage.
• Store in a dry place. Do not expose machine to freezing temperatures.
Attach Nozzle
Line up nozzle with main body
and firmly push nozzle into
body of unit until nozzle locks
into place.
NOTE:
To remove,
push release button and pull the
nozzle away from the body of
the unit.
If a minor problem develops, it usually can be remedied quite easily when the cause is identified by using
the checklist below.
Any other servicing should be done by an authorized service representative.
WARNING:
To reduce risk of personal injury - unplug vacuum before servicing.
FRONT
1.
On/Off Switch
(0=OFF, I=ON)
2.
Dirt Cup
3.
Large Debris Opening
4.
Bottom Nozzle Cover
(underneath nozzle)
BACK
9.
Handle
10. Dirt Cup Release
Button
11. Nozzle Release
Button
12. Cord
DIRT CUP AND FILTER
5. Filter Cap
6. Filter (inside filter cap)
7. Baffle Tube
8. Bottom Empty
Release Button
1.1
Insert handle into body.
NOTE:
Ensure handle faces
proper direction.
Insert screw and tighten until
secure.
NOTE:
DO NOT over
tighten screw.
2.1
2.2
2.3
3.2
3.1
Hold down nozzle with foot and
tilt back to reclining position.
To turn vacuum on, slide switch
forward.
(OFF) O
(ON) I :
Has two modes,
each indicated by a graphic
displayed in window. The first
mode is for bare floors and the
second for carpet.
Baffle Tube Removal and Replacement
Filter Removal and Cleaning
Belt and Brushroll Replacement
Hold dirt cup right side up and
press bottom release button to
open trap door.
Turn baffle tube counter
clockwise until it stops. Pull out
baffle tube, hold over trash can
and shake free debris.
To replace baffle tube, insert
back into dirt cup, align slots
and twist clockwise until tube
locks in place.
4.11
4.12
4.13
4.6
4.14
Dirt Cup and Filter Replacement
Insert filter cap into dirt cup.
Place bottom of dirt cup onto
housing and pivot into place until
dirt cup release button locks.
4.9
4.10
PROBLEM
POSSIBLE REASON
POSSIBLE SOLUTION
Product does not
pick up dirt
1. Dirt cup may be full.
1. Empty dirt cup.
2. Filter may be dirty.
2. Clean and/or wash filter.
3. Baffle tube may be dirty.
3. Remove and clean.
4. Airpath may be clogged.
4. Unplug vacuum before servicing. Remove nozzle by pressing
the nozzle release button and pulling the nozzle in a downward
motion. Remove any debris clogged in the nozzle airpath (see figs.
4.4 - 4.5).
Reassemble nozzle to the product.
5.
Internal component damage.
5. Call for service: 1-800-944-9200
Brushroll will not
turn
1. Brushroll may have an obstruction.
1. Unplug vacuum before servicing. Remove nozzle by pressing
the nozzle release button and pulling the nozzle in a downward
motion. Remove any debris clogged in the nozzle airpath (see figs.
4.4 - 4.5). Reassemble nozzle to the product.
2. Motor protection device tripped.
2. Turn product to off and unplug, product will reset in approximately 30 minutes.
3. Broken belt.
3. Unplug vacuum before servicing. Remove nozzle cover replace with
recommended belt and replace nozzle cover.
4. Internal component damage.
4. Call for service: 1-800-944-9200
Cleaner won’t run
1. Power cord not firmly plugged in.
1. Plug unit into outlet firmly.
2. Internal damage.
2. Call for service: 1-800-944-9200
3. Blown fuse or tripped breaker.
3. Replace fuse or reset breaker in home.
Pull out filter cap.
CAUTION:
To reduce the risk of injury from moving parts, unplug before
servicing.
CAUTION:
Not to be used for grooming a pet.
Turn vacuum nozzle over. Remove screws indicated by arrows on
bottom nozzle plate. Lift plate off nozzle bottom to access brush, belt
and nozzle.
After replacement turn brushroll making sure belt turns freely.
Return nozzle plate and screws.
CET ASPIRATEUR A ÉTÉ CONÇU POUR USAGE DOMESTIQUE SEULEMENT.
L’UTILISATION DE CE PRODUIT À DES FINS COMMERCIALES INVALIDE LA
PRÉSENTE GARANTIE.
CONSIGNES DE SÉCURITÉ IMPORTANTES
RANGER ET CONSERVER CES INSTRUCTIONS
Durant l’utilisation d’un appareil électrique, toujours respecter les précau
tions
élémentaires, y compris les suivantes :
LIRE TOUTES LES INSTRUCTIONS AVANT D’UTILISER CET APPAREIL.
AVERTISSEMENT:
AFIN DE RÉDUIRE AU
MINIMUM LES RISQUES D’INCENDIE, DE
CHOC ÉLECTRIQUE OU DE BLESSURES :
• Assembler complètement avant l’utilisation.
• N’utiliser l’appareil qu’à la tension spécifiée sur la plaque signalétique située derrière le vide-
poussière de l’appareil.
• Ne pas laisser l’appareil sans surveillance lorsqu’il est branché. Le débrancher quand il n’est
pas utilisé et avant d’en faire l’entretien.
• Ne pas utiliser l’appareil à l’extérieur ou sur des surfaces humides.
• Ne pas permettre que l’appareil soit utilisé comme un jouet. Ce produit n’est pas conçu
pour être utilisé par des enfants de 12 ans et moins. Exercer une étroite surveillance
lorsque l’appareil est utilisé à proximité d’enfants. Pour éviter les risques de blessures ou de
dommages, tenir le produit hors de la portée des enfants, et ne pas leur permettre de placer
leurs doigts ou des objets dans les ouvertures.
• L’appareil doit être utilisé seulement comme indiqué dans ce manuel. Utiliser uniquement les
accessoires et les produits recommandés par le fabricant.
• Ne pas utiliser l’appareil si la fiche ou le cordon est endommagé. Si l’aspirateur ne fonctionne
pas adéquatement, s’il est tombé, a été endommagé, a été laissé à l’extérieur ou est tombé
dans l’eau, l’expédier à un centre de réparation pour qu’il soit vérifié.
• Ne pas tirer l’appareil par le cordon, ne pas se servir du cordon comme poignée,
ne pas fermer de portes sur le cordon et ne pas contourner des coins ou des rebords
tranchants avec le cordon. Éviter de faire rouler l’appareil sur le cordon. Tenir le cordon
éloigné des surfaces chaudes.
• Ne pas tirer sur le cordon pour débrancher l’appareil, mais plutôt sur la fiche.
• Ne pas manipuler la fiche ou l’aspirateur avec les mains mouillées.
• Ne pas insérer d’objets dans les ouvertures de l’appareil. Ne pas utiliser l’appareil si les
orifices sont obstrués; retirer la poussière, la mousse, les cheveux ou tout ce qui pourrait
réduire le débit d’air.
• Garder les cheveux, les vêtements amples, les doigts et toute autre partie du corps à l’écart
des ouvertures et des pièces en mouvement.
• Éteindre toutes les commandes avant de débrancher l’appareil.
• Être très prudent pendant l’utilisation dans les escaliers. Ne pas déposer l’aspirateur sur les
marches. Afin d’éviter les blessures ou les dommages et d’empêcher l’appareil de tomber,
toujours placer l’appareil au bas de l’escalier. Ne pas placer l’appareil dans les escaliers ou
sur un meuble, ce qui pourrait causer des blessures ou des dommages.
• Ne pas aspirer les liquides inflammables ou combustibles comme l’essence, ni utiliser
l’appareil à proximité de ces matériaux.
• Toujours éteindre cet appareil avant d’installer ou de retirer le tuyau ou le suceur électrique.
• N’aspirer aucune matière brûlante ou dégageant de la fumée, comme des cigarettes, des
allumettes ou des cendres chaudes.
• Ne pas utiliser l’appareil sans son vide-poussière ou ses filtres.
FRANÇAIS
If you need assistance:
Visit our website at hoover.com. Follow the authorized dealer locator link to find the Hoover
®
authorized dealer nearest you or
call 1-800-944-9200 for an automated referral of Hoover
®
authorized dealer
locations (U.S. only) or to speak with a customer
service representative; Mon- Fri 8am- 7pm EST.
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.
Limited TWO Year Warranty
for Cyclonic Stick Vac
(Domestic Use)
WHAT THIS WARRANTY COVERS
When used and maintained in normal household use and in accordance with the Owner’s Manual, your HOOVER
®
product
is warranted against original defects in material and workmanship for a full two year from date of purchase (the “Warranty
Period”). During the Warranty Period, Hoover
®
will provide labor and parts, at no cost to you, to correct any such defect in
products purchased in the United States, U.S. Military Exchanges and Canada.
HOW TO MAKE A WARRANTY CLAIM
If this product is not as warranted, take or send the product to a Hoover
®
Authorized Warranty Service Dealer along with proof
of purchase. For an automated referral to authorized service outlets in the U.S.A., phone: 1-800-944-9200 OR visit Hoover
®
online at www.hoover.com.
WHAT THIS WARRANTY DOES NOT COVER
This Warranty does not cover: use of the product in a commercial operation (such as maid, janitorial and equipment rental
services), brushroll, belt, improper maintenance of the product, damage due to misuse, acts of God, nature, vandalism
or other acts beyond the control of Hoover
®
, owner’s acts or omissions, use outside the country in which the product
was initially purchased and resales of the product by the original owner. This warranty does not cover pick up, delivery,
transportation or house calls. However, if you mail your product to a Hoover
®
Authorized Warranty Service Dealer, cost of
shipping will be paid one way.
This warranty does not apply to products purchased outside the United States, including its territories and possessions, outside
a U.S. Military Exchange and outside of Canada. This warranty does not cover products purchased from a party that is not an
authorized retailer, dealer, or distributor of Hoover
®
products.
OTHER IMPORTANT TERMS
This Warranty is not transferable and may not be assigned. This Warranty shall be governed and construed under the laws of
the state of Ohio. The Warranty Period
will not be extended by any replacement or repair performed under this Warranty.
THIS WARRANTY IS THE EXCLUSIVE WARRANTY AND REMEDY PROVIDED BY HOOVER
®
. ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE,
ARE DISCLAIMED.
IN NO EVENT WILL HOOVER
®
BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND OR NATURE TO OWNER OR ANY PARTY CLAIMING THROUGH
OWNER, WHETHER BASED IN CONTRACT, NEGLIGENCE, TORT OR STRICT PRODUCTS LIABILITY OR ARISING FROM
ANY CAUSE WHATSOEVER.
Some states do not allow the exclusion of consequential damages, so the above exclusion may
not apply to you.
This warranty gives you specific rights; you may also have others that vary from state to state.
Nozzle
Release
Button
4.4
In order to maintain optimum performance of your cleaner, each time
the dirt cup is removed for emptying it is recommended to check if there
is any debris trapped in the dirt tube (A). If so, remove the debris before
re-attaching the dirt cup to the cleaner.
If you still are experiencing reduced suction/performance, detach
the nozzle base from the main unit (press button on back of nozzle
to release, B) and inspect both openings of the nozzle base (C) for
any trapped debris.
Remove any debris that may be present before
re-attaching the nozzle base to the main body of the cleaner.
Dirt Cup Debris and Clog Removal
A
C
Attach Handle
4. MAINTENANCE
Dirt Cup & Filter Removal & Replacement
IMPORTANT:
For best results, clean after each use.
REGULAR MAINTENANCE:
Each time the dirt cup is emptied, the filter should be cleaned (Filter will be
discolored after use. This will not affect the filter’s performance.)
Any other servicing should be done by an authorized service representative.
Dirt Cup Removal and Cleaning
To Remove dirt cup, depress
the dirt cup release button
located on the top of the dirt
cup and tip away from the
body of the unit.
Press dirt cup empty button over trash can to release debris.
Push door closed until latch clicks.
4.1
4.2
4.3
Handle Release
2.4
Wrap cord around cord hooks
for convenient storage. Attach
the plug end to cord.
Cord Storage
On/Off Switch
4.5
B
Pull out filter and brush clean.
Rinse under cold water as
needed.
4.7
Insert filter into filter cap.
4.8
WARNING: Always dry filter
for 24 hours before replacing.
WARNING:
Do
not
use
detergent or hot water to clean
filter.
• Brushroll continues to turn while product is turned on and handle is in upright position unless On/
Off switch is set to the bare floor mode. To avoid damage to carpet, rugs, and flooring, avoid tipping
cleaner or setting it on furniture, fringed area rugs, or carpeted stairs.
WARNING:
• To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrican to install the proper outlet. Do not
change the plug in any way.
CAUTION:
To reduce the
risk of injury from moving parts,
unplug before servicing.