Hotpoint GSM2200NWW Quick Specs
Hotpoint GSM2200NWW Manual
 |
View all Hotpoint GSM2200NWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Hotpoint GSM2200NWW manual content summary:
- Hotpoint GSM2200NWW | Quick Specs - Page 1
before the dishwasher is installed. All plumbing and electrical work must be in accordance with local codes. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000. Spacemaker Dishwasher Dimensions - Hotpoint GSM2200NWW | Quick Specs - Page 2
GSM2200N GE Spacemaker® Under-the-Sink Dishwasher 10" from cabinet Allow a 5" radius to prevent kinking Note: A close-fitting elbow or special shallow sink strainer is necessary to provide clearance between sink drain and dishwasher. Dishwasher furnished with 1/2" I.D. drain hose, 78" long. If - Hotpoint GSM2200NWW | Quick Specs - Page 3
of installation. GSM2200N GE Spacemaker® Under-the-Sink Dishwasher Cabinet Rough-In Note: Either single- or double-bowl sink may be used, centered or offset, as shown in the front view illustration. The 20-1/2" maximum dimension from wall to front of sink bowl must be accurate if dishwasher is - Hotpoint GSM2200NWW | Quick Specs - Page 4
GE Spacemaker® Under-the-Sink Dishwasher Features and Benefits • Trimless Door Design - Features sleek, classic panels for an instant built-in look • Spacemaker® upper rack - Makes the most of any space, providing a roomy area for glassware and dishes • 4-level PowerScrub™ wash system - Four wash
-
1 -
2 -
3 -
4
 |
 |
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
geappliances.com or call GE Answer Center
®
service, 800.626.2000.
Specification Created 4/07
350511
Listed by
Underwriters
Laboratories
Note:
Undersink dishwashers can be installed only
under sinks and not under other appliances.
Plumbing—Hot Water Only:
Use 3/8" O.D. copper
tubing or 1/2" O.D. plastic tubing minimum inlet
line. Water valve has 3/8" internal threads. Hand
cut-off valve is recommended.
Electrical:
Fuse circuit with 15 amp or 20 amp
standard fuse or circuit breaker. Total amp load is
8.6. Dishwasher operates on 120V, 60HZ power,
Two-wire cable (14 Ga. Min.) with ground must be
installed.
Specifications:
Inlet water temperature
recommended—minimum 120°F at dishwasher.
Inlet water pressure required—15 to 120 lbs./sq.
inch.
Note:
All rough-in, both plumbing and electrical,
must be completed before the dishwasher is
installed. All plumbing and electrical work must be
in accordance with local codes.
2" From
cabinet
6
4
2" From
floor
19" From
wall
Cable 24"
from wall
3
White (neutral)
Black (line)
Ground
Plumbing and
wiring must enter
within this area
from either side,
rear or bottom
FRONT VIEW
Hot
Cold
GSM2200N
GE Spacemaker
®
Under-the-Sink Dishwasher
Dimensions and Installation Information (in inches)