Hotpoint NWXR483GGWW Dimensions
Hotpoint NWXR483GGWW - 6.0 cu. Ft. Extra-Large Gas Dryer Manual
 |
View all Hotpoint NWXR483GGWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Hotpoint NWXR483GGWW manual content summary:
- Hotpoint NWXR483GGWW | Dimensions - Page 1
for correct kit and have a qualified gas technician install a conversion kit. See dryer ducting information for proper installation. Installation Information: For complete information, see installation instructions packed with product for current dimensional data. Side View *24-1/2" from the edge - Hotpoint NWXR483GGWW | Dimensions - Page 2
• No other fuel-burning appliance shall be installed in the same closet with a gas dryer. Bathroom or Bedroom Installation: • The dryer MUST be exhausted to the information, see installation instructions packed with your dryer. Ducting Materials: For best performance, this dryer should be vented with - Hotpoint NWXR483GGWW | Dimensions - Page 3
NWXR483GG - Hotpoint 6.0 Cu. Ft. Extra-Large Capacity Gas Dryer Start Push to Start Temperature Cottons regular clothes by signaling every 5 minutes up to 20 minutes, after clothes are dry • Interior Dryer Light - Lets you see everything inside for easy loading and unloading • Quiet-By-Design™
-
1 -
2 -
3
 |
 |
NWXR483GG – Hotpoint 6.0 Cu. Ft. Extra-Large Capacity Gas Dryer
Dryer Dimensions (in inches)
36
42
27
2
5-1/2
2-1/2
25-1/2*
Side View
Rear View
4-3/4
25-3/4
23-1/2
11-3/4
Exhaust Options:
3-way via rear, left and bottom. Dryer is shipped exhausted to the rear.
Alternate exhausting knockouts are supplied.
Circuit Requirements:
An individual properly-grounded branch circuit, with a three-prong grounding-
type receptacle, protected by a 15- or 20-amp circuit breaker or a time-delay
fuse is required.
Gas Dryer Electric Rating:
120V, 60Hz, 6 Amp
Gas (BTU/HR):
22,000. Factory-equipped for natural gas. Tested for LP gas.
LP gas supply requires an optional conversion kit. Check installation instructions
for correct kit and have a qualified gas technician install a conversion kit. See
dryer ducting information for proper installation.
Installation Information:
For complete information, see installation
instructions packed with product for current dimensional data.
*24-1/2” from the edge of the side panel to the front.
25-1/2” from front to edge of end caps.
Specification Created 11/06
470144
Listed by
Underwriters
Laboratories