Huawei B260a User Manual - Page 23

WLAN Settings (Optional) Mode Description Wireless It is used to connect two or more access Bridge points. Access Point The access points meeting the IEEE 802.11b/g standard or the wireless terminals can connect the wireless device. • Bridge Restriction: It refers to the limitation to the peer MAC addresses. When it is Disabled, the device can access all the remote bridges; when it is Enabled, the device can only access the remote bridges that the addresses are in the address list. • Bridges: It refers to the physical address of the remote peer bridge. The device supports the point-to-multipoint (PTM) bridge mode. • Peer MAC Address: It refers to the physical address list of the remote peer bridges. • Link Status: Up shows the successful connection and Down shows the failed connection. Configuring the MAC Filter Click to access the WLAN MAC Filter page.You can control and manage the clients accessing the WLAN, and improve the WLAN security performance. ◆ MAC Restrict Mode The following table shows the MAC address filter modes: Parameter Description Disabled The MAC address filter function is disabled. Allow The clients with addresses in the MAC Addresses list are allowed to connect with the device through the WLAN. Deny The clients with addresses in the MAC Addresses list are not allowed to connect with the device through the WLAN. ◆ MAC Addresses • Enter MAC addresses in the list. The device can perform the access control over the clients whose MAC addresses are in the list. 20